START_AIPS: Your initial AIPS printer is the Room 324 PostScript printer two-sided START_AIPS: - system name aoc324/dup, AIPS type PS START_AIPS: User data area assignments: (Using COAOARN-specific default file /home/AIPS/DA00/DADEVS.LIST.COAOARN for DADEVS.PL) Disk 1 (1) is /DATA/SPACE_1 Disk 2 (2) is /DATA/SPACE_2 Tape assignments: Tape 1 is REMOTE Tape 2 is REMOTE START_AIPS: Starting TPMON daemons on SPACE asynchronously... ================================ AIPS NEWS =============================== ------------------------------ 2016-12-02 TST is 31DEC15 NEW is 31DEC16 OLD is 31DEC17 ------------------------------ The remaining members of the AIPS group can be contacted directly by email to daip@nrao.edu. The contact person in Socorro is Eric Greisen, backed up by Amy Mioduszewski. ============================================================================ ********************************************************************** * The ~aips/USERS area is intended to be used for small, temporary * * files only. Do not store FITS files or other large data files in * * this area. Such files will be deleted without warning. * * **DO NOT** put any personal files in the /home/AIPS area; they * * will be removed as soon as they are detected. Create a readily * * recognizable directory in ~aips/USERS/ e.g. ~aips/USERS/ * * and put things there. Note that this area is also not for long- * * term storage; anything important should be kept on your personal * * account. OLD FILES ARE DELETED WITHOUT WARNING. * ********************************************************************** Starting up 31DEC18 AIPS with normal priority ?>>>>>>>>>>>>>>>>>>>>>>>>>##AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server ZMSGOP: FILE DA01:MSD001000.001; NOT FOUND MSGWRT ERROR 2 AT OPEN AIPS 2: Enter user ID number AIPS 2: 31DEC18 AIPS: AIPS 2: Copyright (C) 1995-2018 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI802I' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** #>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) HN POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 #>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 16 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9875E-01 rms: 5.0018E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 1 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-HN-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9827E-01 rms: 5.0067E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 2 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-HN-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 16 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) HN POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 10 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) HN POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 22 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9553E-01 rms: 4.9684E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 3 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-HN-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0112E+00 rms: 5.0112E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 4 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-HN-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 16 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9869E-01 rms: 5.0500E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 5 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-HN-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9848E-01 rms: 4.6988E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 6 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-OV-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9837E-01 rms: 4.5957E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 7 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-OV-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) OV POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 15 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 200 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0006E+00 rms: 4.6975E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 8 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-OV-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 10 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) OV POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 22 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9795E-01 rms: 4.7513E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 9 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-OV-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0002E+00 rms: 4.7554E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 10 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-OV-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0003E+00 rms: 4.6758E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 11 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-OV-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0006E+00 rms: 4.9661E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 12 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-LA-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0011E+00 rms: 4.8634E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 13 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-LA-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9906E-01 rms: 4.9033E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 14 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-LA-LL-3.txt LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 16 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) LA POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 10 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 200 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0019E+00 rms: 4.9270E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 15 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-LA-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9860E-01 rms: 4.9482E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 16 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-LA-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0001E+00 rms: 4.9729E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 17 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-LA-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9991E-01 rms: 4.9553E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 18 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-LA-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9984E-01 rms: 4.8285E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 19 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-KP-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9922E-01 rms: 4.7234E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 20 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-KP-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0000E+00 rms: 4.7821E-01 LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 21 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-KP-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 1 IO= 16 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 200 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0021E+00 rms: 4.7967E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 22 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-KP-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 10 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 200 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9843E-01 rms: 4.8362E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 23 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-KP-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0038E+00 rms: 4.8411E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 24 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-KP-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9832E-01 rms: 4.8323E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 25 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-KP-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9996E-01 rms: 4.7957E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 26 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-KP-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9951E-01 rms: 4.6238E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 27 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-PT-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0002E+00 rms: 4.5519E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 28 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-PT-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.8867E-01 rms: 4.5900E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 29 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-PT-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 16 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 200 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0167E+00 rms: 4.6516E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 30 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-PT-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 10 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 200 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9474E-01 rms: 4.6768E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 31 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-PT-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0036E+00 rms: 4.6955E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 32 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-PT-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9555E-01 rms: 4.6830E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 33 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-PT-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 1 IO= 35 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0005E+00 rms: 4.6740E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 34 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-PT-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 14 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9990E-01 rms: 5.2191E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 35 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-FD-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 16 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0005E+00 rms: 5.0460E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 36 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-FD-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9701E-01 rms: 5.0087E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 37 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-FD-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 16 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 200 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0024E+00 rms: 4.9035E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 38 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-FD-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 10 >>>>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 200 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0000E+00 rms: 5.0272E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 39 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-FD-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0005E+00 rms: 5.3786E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 40 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-FD-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9773E-01 rms: 5.4737E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 41 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-FD-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0001E+00 rms: 5.4243E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 42 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-FD-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9862E-01 rms: 4.6740E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 43 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-BR-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes >AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9853E-01 rms: 4.6324E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 44 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-BR-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) BR POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 15 >>>>>>>>AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) BR LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) BR POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 10 >>>>>>>>AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) BR POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) BR POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 22 >>>>>>>>AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9818E-01 rms: 4.7558E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 45 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-BR-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 1 IO= 35 >>>>>>>>AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0009E+00 rms: 4.7591E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 46 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-BR-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0001E+00 rms: 4.6795E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 47 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-BR-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>>>>AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9284E-01 rms: 4.7104E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 48 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-NL-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.8002E-01 rms: 4.7382E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 49 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-NL-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0147E+00 rms: 4.8428E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 50 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-NL-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 16 >>>>>>>>AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) NL POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 10 >>>>>>>>AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) NL POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) NL POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 22 >>>>>>>>AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9687E-01 rms: 4.7766E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 51 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-NL-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0069E+00 rms: 4.8033E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 52 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-NL-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0001E+00 rms: 4.8248E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 53 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki802i-NL-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>>>>>>>>AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: I WON'T DESTROY ON DEFAULT DISK OR TYPE INDISK, INTYPE= 0 AIPS 2: NO DESTROY AIPS 2: Begin check for any 'standard' scratch files AIPS 2: Scratch files -- destroyed: 0 still active: 0 AIPS 2: Destroyed empty user catalog on disk 2 AIPS 2: User 8888:109798 messages, oldest written 13-MAR-2018 13:11:16 AIPS 2: Deleted 0 messages AIPS 2: Saved POPS environment in area named 'LASTEXIT' AIPS 2: Session command-line history saved. AIPS 2: space 31DEC18 TST: Cpu= 0.2 Real= 10 IO= 16