START_AIPS: Your initial AIPS printer is the Room 324 PostScript printer two-sided START_AIPS: - system name aoc324/dup, AIPS type PS START_AIPS: User data area assignments: (Using COAOARN-specific default file /home/AIPS/DA00/DADEVS.LIST.COAOARN for DADEVS.PL) Disk 1 (1) is /DATA/SPACE_1 Disk 2 (2) is /DATA/SPACE_2 Tape assignments: Tape 1 is REMOTE Tape 2 is REMOTE START_AIPS: Starting TPMON daemons on SPACE asynchronously... ================================ AIPS NEWS =============================== ------------------------------ 2016-12-02 TST is 31DEC15 NEW is 31DEC16 OLD is 31DEC17 ------------------------------ The remaining members of the AIPS group can be contacted directly by email to daip@nrao.edu. The contact person in Socorro is Eric Greisen, backed up by Amy Mioduszewski. ============================================================================ ********************************************************************** * The ~aips/USERS area is intended to be used for small, temporary * * files only. Do not store FITS files or other large data files in * * this area. Such files will be deleted without warning. * * **DO NOT** put any personal files in the /home/AIPS area; they * * will be removed as soon as they are detected. Create a readily * * recognizable directory in ~aips/USERS/ e.g. ~aips/USERS/ * * and put things there. Note that this area is also not for long- * * term storage; anything important should be kept on your personal * * account. OLD FILES ARE DELETED WITHOUT WARNING. * ********************************************************************** Starting up 31DEC18 AIPS with normal priority ?>>>>>>>>>>>>>>>>>>>>>>>>>##AIPS 1: You are NOT assigned a TV device or server AIPS 1: You are NOT assigned a graphics device or server ZMSGOP: FILE DA01:MSD001000.001; NOT FOUND MSGWRT ERROR 2 AT OPEN AIPS 1: Enter user ID number AIPS 1: 31DEC18 AIPS: AIPS 1: Copyright (C) 1995-2018 Associated Universities, Inc. AIPS 1: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 1: for details, type HELP GNUGPL AIPS 1: This is free software, and you are welcome to redistribute it AIPS 1: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 1: Previous session command-line history recovered. AIPS 1: TAB-key completions enabled, type HELP READLINE for details. AIPS 1: Recovered POPS environment from last exit AIPS 1: POSSM Task to plot total and cross-power spectra. AIPS 1: Adverbs Values Comments AIPS 1: ---------------------------------------------------------------- AIPS 1: USERID 0 User number - ignored AIPS 1: INNAME 'KI801J' Input UV file name (name) AIPS 1: INCLASS 'UVDATA' Input UV file name (class) AIPS 1: INSEQ 0 Input UV file name (seq. #) AIPS 1: INDISK 0 Input UV file disk unit # AIPS 1: SOURCES *all ' ' Source list AIPS 1: QUAL -1 Source qualifier -1=>all AIPS 1: CALCODE ' ' Calibrator code ' '=>all AIPS 1: SELBAND -1 Bandwidth to select (kHz) AIPS 1: SELFREQ -1 Frequency to select (MHz) AIPS 1: FREQID -1 Freq. ID to select. AIPS 1: UVRANGE 0 0 UV range to be plotted AIPS 1: TIMERANG *all 0 Time range to be plotted AIPS 1: STOKES ' ' Stokes type(s) to select. AIPS 1: BIF 0 Lowest IF number 0=>all AIPS 1: EIF 0 Highest IF number 0=>all AIPS 1: BCHAN 0 Lowest channel number 0=>all AIPS 1: ECHAN 0 Highest channel number 0=>all AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: SUBARRAY 0 Subarray, 0=>1 AIPS 1: ANTENNAS *all 0 Antennas to select AIPS 1: BASELINE *all 0 Baselines with ANTENNAS AIPS 1: DOCALIB 1 > 0 calibrate data & weights AIPS 1: > 99 do NOT calibrate weights AIPS 1: GAINUSE 0 CL (or SN) table to apply AIPS 1: DOPOL -1 If >0 correct polarization. AIPS 1: PDVER 0 PD table to apply (DOPOL>0) AIPS 1: BLVER -1 BL table to apply. AIPS 1: FLAGVER 0 Flag table version AIPS 1: DOBAND -1 If >0 apply bandpass cal. AIPS 1: Method used depends on value AIPS 1: of DOBAND (see HELP file). AIPS 1: BPVER -1 Bandpass table version AIPS 1: SMOOTH *all 0 Smoothing function. SEE AIPS 1: POSSM HELP SPECIAL VALUES AIPS 1: SHIFT 0 0 Position shift: AIPS 1: RA, Dec (arcsec) AIPS 1: 0 => no shift AIPS 1: APARM 1 1 Control information: AIPS 1: 0 0 1: < 0 => scalar average AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: -180 180 >= 0 => vector average AIPS 1: 1 1 2: = 0 => self-scale AIPS 1: 1 0 > 0 => fixed scale AIPS 1: (use APARM(3-6)) AIPS 1: 3: min. amplitude AIPS 1: 4: max. amplitude AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** #>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0001E+00 rms: 5.0106E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 1 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-HN-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 #>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 15 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0019E+00 rms: 5.0659E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 2 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-HN-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 16 LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM1: POSSUV: for antenna(s) HN POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0011E+00 rms: 5.0041E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 3 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-HN-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 120 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9896E-01 rms: 5.0213E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 4 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-HN-LL-5.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 15 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9974E-01 rms: 5.0370E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 5 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-HN-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 15 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0013E+00 rms: 5.0136E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 6 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-HN-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9926E-01 rms: 4.9977E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 7 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-HN-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) OV POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0006E+00 rms: 4.7265E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 8 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-OV-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) OV POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0001E+00 rms: 4.6855E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 9 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-OV-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) OV POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0015E+00 rms: 4.6352E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 10 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-OV-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 2 LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) OV POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) OV POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) OV POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9949E-01 rms: 4.6804E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 11 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-OV-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 1 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) OV POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9896E-01 rms: 4.7100E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 12 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-OV-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) OV POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0011E+00 rms: 4.6078E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 13 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-OV-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9925E-01 rms: 5.1437E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 14 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-LA-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0029E+00 rms: 5.0338E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 15 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-LA-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 420 LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9935E-01 rms: 4.9485E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 16 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-LA-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9991E-01 rms: 4.9225E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 17 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-LA-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) LA POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9979E-01 rms: 5.1108E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 18 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-LA-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0010E+00 rms: 5.0493E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 19 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-LA-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9857E-01 rms: 4.9146E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 20 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-LA-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) KP POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0004E+00 rms: 4.8181E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 21 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-KP-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) KP POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0000E+00 rms: 4.7889E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 22 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-KP-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) KP POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0007E+00 rms: 4.7366E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 23 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-KP-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) KP POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) KP POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) KP POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0000E+00 rms: 4.7769E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 24 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-KP-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) KP POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0010E+00 rms: 4.7909E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 25 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-KP-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) KP POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9798E-01 rms: 4.6710E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 26 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-KP-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0000E+00 rms: 4.6828E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 27 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-PT-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9997E-01 rms: 4.6432E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 28 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-PT-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9981E-01 rms: 4.5857E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 29 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-PT-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0004E+00 rms: 4.5575E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 30 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-PT-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) PT POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9986E-01 rms: 4.6464E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 31 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-PT-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9988E-01 rms: 4.6651E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 32 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-PT-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9954E-01 rms: 4.5636E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 33 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-PT-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9960E-01 rms: 4.8255E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 34 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-FD-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0025E+00 rms: 4.8079E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 35 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-FD-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) FD POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9834E-01 rms: 4.7322E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 36 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-FD-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) FD POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0001E+00 rms: 4.8186E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 37 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-FD-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9855E-01 rms: 4.8082E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 38 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-FD-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0024E+00 rms: 4.7139E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 39 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-FD-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0004E+00 rms: 4.7528E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 40 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-BR-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9911E-01 rms: 4.6964E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 41 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-BR-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0011E+00 rms: 4.6495E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 42 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-BR-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9846E-01 rms: 4.6386E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 43 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-BR-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 120 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0006E+00 rms: 4.7012E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 44 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-BR-LL-5.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9991E-01 rms: 4.6923E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 45 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-BR-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0023E+00 rms: 4.7015E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 46 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-BR-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) BR POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) BR POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) BR POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) BR POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) BR POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) BR POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) BR POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) BR POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) BR POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) BR POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) BR POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) BR POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) BR POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) BR POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) BR POSSM1: POSSUV: Warning, No valid data for IF: 16 LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM1: POSSUV: for antenna(s) BR POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0003E+00 rms: 4.8196E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 47 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-NL-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0032E+00 rms: 4.7760E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 48 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-NL-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0002E+00 rms: 4.7252E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 49 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-NL-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9396E-01 rms: 4.7043E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 50 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-NL-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 1 IO= 14 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 120 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0036E+00 rms: 4.7823E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 51 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-NL-LL-5.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0002E+00 rms: 4.7988E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 52 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-NL-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9805E-01 rms: 4.7940E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 53 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-NL-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9909E-01 rms: 4.7500E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 54 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki801j-NL-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: I WON'T DESTROY ON DEFAULT DISK OR TYPE INDISK, INTYPE= 0 AIPS 1: NO DESTROY AIPS 1: Begin check for any 'standard' scratch files AIPS 1: Scratch files -- destroyed: 0 still active: 0 AIPS 1: Destroyed empty user catalog on disk 2 AIPS 1: User 8888: 90507 messages, oldest written 01-FEB-2018 14:00:04 AIPS 1: Deleted 0 messages AIPS 1: Saved POPS environment in area named 'LASTEXIT' AIPS 1: Session command-line history saved. LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: space 31DEC18 TST: Cpu= 0.2 Real= 8 IO= 14