START_AIPS: Your initial AIPS printer is the Room 324 PostScript printer two-sided START_AIPS: - system name aoc324/dup, AIPS type PS START_AIPS: User data area assignments: (Using COAOARN-specific default file /home/AIPS/DA00/DADEVS.LIST.COAOARN for DADEVS.PL) Disk 1 (1) is /DATA/SPACE_1 Disk 2 (2) is /DATA/SPACE_2 Tape assignments: Tape 1 is REMOTE Tape 2 is REMOTE START_AIPS: Starting TPMON daemons on SPACE asynchronously... ================================ AIPS NEWS =============================== ------------------------------ 2016-12-02 TST is 31DEC15 NEW is 31DEC16 OLD is 31DEC17 ------------------------------ The remaining members of the AIPS group can be contacted directly by email to daip@nrao.edu. The contact person in Socorro is Eric Greisen, backed up by Amy Mioduszewski. ============================================================================ ********************************************************************** * The ~aips/USERS area is intended to be used for small, temporary * * files only. Do not store FITS files or other large data files in * * this area. Such files will be deleted without warning. * * **DO NOT** put any personal files in the /home/AIPS area; they * * will be removed as soon as they are detected. Create a readily * * recognizable directory in ~aips/USERS/ e.g. ~aips/USERS/ * * and put things there. Note that this area is also not for long- * * term storage; anything important should be kept on your personal * * account. OLD FILES ARE DELETED WITHOUT WARNING. * ********************************************************************** Starting up 31DEC17 AIPS with normal priority ?>>>>>>>>>>>>>>>>>>>>>>>>>##AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server ZMSGOP: FILE DA01:MSD001000.001; NOT FOUND MSGWRT ERROR 2 AT OPEN AIPS 2: Enter user ID number AIPS 2: 31DEC17 AIPS: AIPS 2: Copyright (C) 1995-2017 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI711I' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** #>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9938E-01 rms: 4.9612E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 1 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-HN-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 #>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9949E-01 rms: 5.0556E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 2 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-HN-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9800E-01 rms: 5.0074E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 3 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-HN-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 16 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0001E+00 rms: 5.0374E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 4 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-HN-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0017E+00 rms: 5.0047E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 5 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-HN-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) HN POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9957E-01 rms: 5.0105E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 6 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-HN-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 16 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9961E-01 rms: 5.0281E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 7 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-HN-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 1 IO= 23 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9952E-01 rms: 4.5757E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 8 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-OV-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9953E-01 rms: 4.6882E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 9 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-OV-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) OV LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) OV POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9895E-01 rms: 4.7344E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 10 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-OV-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9837E-01 rms: 4.6867E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 11 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-OV-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0029E+00 rms: 4.6925E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 12 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-OV-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0047E+00 rms: 4.7604E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 13 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-OV-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9527E-01 rms: 4.7406E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 14 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-OV-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0006E+00 rms: 4.8022E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 15 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-LA-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0007E+00 rms: 4.9459E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 16 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-LA-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 16 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0010E+00 rms: 4.7964E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 17 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-LA-LL-3.txt LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9802E-01 rms: 4.9206E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 18 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-LA-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9930E-01 rms: 4.8642E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 19 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-LA-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0006E+00 rms: 4.8342E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 20 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-LA-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0032E+00 rms: 4.9833E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 21 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-LA-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9597E-01 rms: 4.9826E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 22 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-LA-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0001E+00 rms: 4.7258E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 23 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-KP-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0001E+00 rms: 4.7998E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 24 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-KP-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9778E-01 rms: 4.6812E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 25 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-KP-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) KP LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0018E+00 rms: 4.8316E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 26 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-KP-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9917E-01 rms: 4.7736E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 27 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-KP-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9908E-01 rms: 4.7542E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 28 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-KP-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9896E-01 rms: 4.8407E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 29 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-KP-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 1 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0012E+00 rms: 4.8492E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 30 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-KP-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 16 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9993E-01 rms: 4.5848E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 31 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-FD-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 16 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9996E-01 rms: 4.7216E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 32 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-FD-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0001E+00 rms: 4.6108E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 33 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-FD-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9930E-01 rms: 4.7305E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 34 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-FD-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 16 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9994E-01 rms: 4.6757E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 35 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-FD-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 16 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0009E+00 rms: 4.6590E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 36 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-FD-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 16 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0005E+00 rms: 4.7610E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 37 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-FD-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 16 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9815E-01 rms: 4.7677E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 38 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-FD-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0012E+00 rms: 4.6194E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 39 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-BR-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0014E+00 rms: 4.7239E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 40 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-BR-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9864E-01 rms: 4.6590E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 41 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-BR-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9880E-01 rms: 4.7485E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 42 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-BR-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9718E-01 rms: 4.7111E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 43 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-BR-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0028E+00 rms: 4.7112E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 44 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-BR-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9807E-01 rms: 4.7695E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 45 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-BR-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0018E+00 rms: 4.7788E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 46 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-BR-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) MK POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) MK POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0005E+00 rms: 4.6496E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 47 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-MK-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) MK POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) MK POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0006E+00 rms: 4.7466E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 48 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-MK-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) MK POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0008E+00 rms: 4.7195E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 49 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-MK-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) MK POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9898E-01 rms: 4.7172E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 50 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-MK-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 1 IO= 39 >>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) MK POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0003E+00 rms: 4.7299E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 51 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-MK-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) MK POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9875E-01 rms: 4.7194E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 52 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-MK-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0024E+00 rms: 4.7028E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 53 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-NL-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0027E+00 rms: 4.7919E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 54 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-NL-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9852E-01 rms: 4.6531E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 55 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-NL-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9906E-01 rms: 4.7439E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 56 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-NL-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9027E-01 rms: 4.7219E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 57 created LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-NL-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0050E+00 rms: 4.7522E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 58 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-NL-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9979E-01 rms: 4.8307E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 59 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-NL-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC17) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9990E-01 rms: 4.8487E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 60 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki711i-NL-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>>>>>AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: I WON'T DESTROY ON DEFAULT DISK OR TYPE INDISK, INTYPE= 0 AIPS 2: NO DESTROY AIPS 2: Begin check for any 'standard' scratch files AIPS 2: Scratch files -- destroyed: 0 still active: 0 AIPS 2: Destroyed empty user catalog on disk 2 AIPS 2: User 8888:126510 messages, oldest written 20-NOV-2017 13:32:31 AIPS 2: Deleted 0 messages AIPS 2: Saved POPS environment in area named 'LASTEXIT' AIPS 2: Session command-line history saved. AIPS 2: space 31DEC17 TST: Cpu= 0.2 Real= 8 IO= 18