START_AIPS: Your initial AIPS printer is the Room 324 PostScript printer two-sided START_AIPS: - system name aoc324/dup, AIPS type PS START_AIPS: User data area assignments: (Using COAOARN-specific default file /home/AIPS/DA00/DADEVS.LIST.COAOARN for DADEVS.PL) Disk 1 (1) is /DATA/SPACE_1 Disk 2 (2) is /DATA/SPACE_2 Tape assignments: Tape 1 is REMOTE Tape 2 is REMOTE START_AIPS: Starting TPMON daemons on SPACE asynchronously... ================================ AIPS NEWS =============================== ------------------------------ 2016-12-02 TST is 31DEC15 NEW is 31DEC16 OLD is 31DEC17 ------------------------------ The remaining members of the AIPS group can be contacted directly by email to daip@nrao.edu. The contact person in Socorro is Eric Greisen, backed up by Amy Mioduszewski. ============================================================================ ********************************************************************** * The ~aips/USERS area is intended to be used for small, temporary * * files only. Do not store FITS files or other large data files in * * this area. Such files will be deleted without warning. * * **DO NOT** put any personal files in the /home/AIPS area; they * * will be removed as soon as they are detected. Create a readily * * recognizable directory in ~aips/USERS/ e.g. ~aips/USERS/ * * and put things there. Note that this area is also not for long- * * term storage; anything important should be kept on your personal * * account. OLD FILES ARE DELETED WITHOUT WARNING. * ********************************************************************** Starting up 31DEC17 AIPS with normal priority ?>>>>>>>>>>>>>>>>>>>>>>>>>##AIPS 1: You are NOT assigned a TV device or server AIPS 1: You are NOT assigned a graphics device or server ZMSGOP: FILE DA01:MSD001000.001; NOT FOUND MSGWRT ERROR 2 AT OPEN AIPS 1: Enter user ID number AIPS 1: 31DEC17 AIPS: AIPS 1: Copyright (C) 1995-2017 Associated Universities, Inc. AIPS 1: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 1: for details, type HELP GNUGPL AIPS 1: This is free software, and you are welcome to redistribute it AIPS 1: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 1: Previous session command-line history recovered. AIPS 1: TAB-key completions enabled, type HELP READLINE for details. AIPS 1: Recovered POPS environment from last exit AIPS 1: POSSM Task to plot total and cross-power spectra. AIPS 1: Adverbs Values Comments AIPS 1: ---------------------------------------------------------------- AIPS 1: USERID 0 User number - ignored AIPS 1: INNAME 'KI710B' Input UV file name (name) AIPS 1: INCLASS 'UVDATA' Input UV file name (class) AIPS 1: INSEQ 0 Input UV file name (seq. #) AIPS 1: INDISK 0 Input UV file disk unit # AIPS 1: SOURCES *all ' ' Source list AIPS 1: QUAL -1 Source qualifier -1=>all AIPS 1: CALCODE ' ' Calibrator code ' '=>all AIPS 1: SELBAND -1 Bandwidth to select (kHz) AIPS 1: SELFREQ -1 Frequency to select (MHz) AIPS 1: FREQID -1 Freq. ID to select. AIPS 1: UVRANGE 0 0 UV range to be plotted AIPS 1: TIMERANG *all 0 Time range to be plotted AIPS 1: STOKES ' ' Stokes type(s) to select. AIPS 1: BIF 0 Lowest IF number 0=>all AIPS 1: EIF 0 Highest IF number 0=>all AIPS 1: BCHAN 0 Lowest channel number 0=>all AIPS 1: ECHAN 0 Highest channel number 0=>all AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: SUBARRAY 0 Subarray, 0=>1 AIPS 1: ANTENNAS *all 0 Antennas to select AIPS 1: BASELINE *all 0 Baselines with ANTENNAS AIPS 1: DOCALIB 1 > 0 calibrate data & weights AIPS 1: > 99 do NOT calibrate weights AIPS 1: GAINUSE 0 CL (or SN) table to apply AIPS 1: DOPOL -1 If >0 correct polarization. AIPS 1: PDVER 0 PD table to apply (DOPOL>0) AIPS 1: BLVER -1 BL table to apply. AIPS 1: FLAGVER 0 Flag table version AIPS 1: DOBAND -1 If >0 apply bandpass cal. AIPS 1: Method used depends on value AIPS 1: of DOBAND (see HELP file). AIPS 1: BPVER -1 Bandpass table version AIPS 1: SMOOTH *all 0 Smoothing function. SEE AIPS 1: POSSM HELP SPECIAL VALUES AIPS 1: SHIFT 0 0 Position shift: AIPS 1: RA, Dec (arcsec) AIPS 1: 0 => no shift AIPS 1: APARM 1 1 Control information: AIPS 1: 0 0 1: < 0 => scalar average AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: -180 180 >= 0 => vector average AIPS 1: 1 1 2: = 0 => self-scale AIPS 1: 1 0 > 0 => fixed scale AIPS 1: (use APARM(3-6)) AIPS 1: 3: min. amplitude AIPS 1: 4: max. amplitude AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** #>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 15 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0003E+00 rms: 4.7356E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 1 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-HN-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 19 #>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 15 visibilities from total data set of 200 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9985E-01 rms: 4.8082E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 2 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-HN-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 16 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 15 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0007E+00 rms: 4.8233E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 3 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-HN-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9648E-01 rms: 4.8420E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 4 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-HN-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 15 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0036E+00 rms: 4.8602E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 5 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-HN-LL-5.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 15 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9974E-01 rms: 4.8091E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 6 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-HN-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9913E-01 rms: 4.8116E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 7 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-HN-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 1 IO= 24 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0010E+00 rms: 4.8233E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 8 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-HN-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) HN POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0000E+00 rms: 4.7809E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 9 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-HN-LL-10.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) OV POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0003E+00 rms: 4.7549E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 10 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-OV-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 19 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 200 POSSM1: POSSUV: for antenna(s) OV POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0032E+00 rms: 4.7654E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 11 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-OV-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 16 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) OV POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9779E-01 rms: 4.7756E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 12 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-OV-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) OV POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9871E-01 rms: 4.8072E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 13 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-OV-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) OV POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0001E+00 rms: 4.8113E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 14 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-OV-LL-5.txt LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) OV POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) OV POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) OV POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) OV POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9874E-01 rms: 4.7495E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 15 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-OV-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 300 POSSM1: POSSUV: for antenna(s) OV POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0008E+00 rms: 4.7683E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 16 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-OV-LL-9.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) OV POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0002E+00 rms: 4.8093E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 17 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-OV-LL-10.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0003E+00 rms: 6.5407E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 18 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-LA-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 135 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 19 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) LA LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) LA POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) LA POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 15 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0003E+00 rms: 6.1306E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 19 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-LA-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0007E+00 rms: 6.4548E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 20 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-LA-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 141 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9857E-01 rms: 6.3933E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 21 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-LA-LL-5.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 141 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9998E-01 rms: 6.1060E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 22 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-LA-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0006E+00 rms: 6.1736E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 23 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-LA-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0003E+00 rms: 6.2754E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 24 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-LA-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 141 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 300 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0001E+00 rms: 6.1478E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 25 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-LA-LL-9.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) LA LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9918E-01 rms: 6.2976E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 26 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-LA-LL-10.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 141 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 1 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9962E-01 rms: 4.9010E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 27 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-FD-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 19 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) FD POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 15 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) FD POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9902E-01 rms: 4.8370E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 28 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-FD-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0004E+00 rms: 4.8412E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 29 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-FD-LL-5.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0005E+00 rms: 4.7632E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 30 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-FD-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM1: Averaged 15 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9820E-01 rms: 4.7703E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 31 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-FD-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0040E+00 rms: 4.8229E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 32 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-FD-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) FD POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0000E+00 rms: 4.8623E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 33 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-FD-LL-10.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9910E-01 rms: 5.7456E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 34 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-BR-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 19 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 200 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9873E-01 rms: 5.3791E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 35 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-BR-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 16 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9978E-01 rms: 5.4323E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 36 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-BR-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0019E+00 rms: 5.6870E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 37 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-BR-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9961E-01 rms: 5.6212E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 38 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-BR-LL-5.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0021E+00 rms: 5.1332E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 39 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-BR-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9793E-01 rms: 5.1717E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 40 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-BR-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9809E-01 rms: 5.3768E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 41 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-BR-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 300 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0037E+00 rms: 5.4955E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 42 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-BR-LL-9.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9730E-01 rms: 5.5749E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 43 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-BR-LL-10.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes >AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9888E-01 rms: 6.1366E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 44 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-PT-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 19 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) PT POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 15 >>>>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9997E-01 rms: 5.9096E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 45 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-PT-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 1 IO= 24 >>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0032E+00 rms: 6.1055E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 46 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-PT-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9677E-01 rms: 6.0630E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 47 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-PT-LL-5.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0003E+00 rms: 5.8334E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 48 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-PT-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9982E-01 rms: 5.8940E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 49 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-PT-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9983E-01 rms: 5.9479E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 50 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-PT-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 300 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9912E-01 rms: 5.9065E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 51 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-PT-LL-9.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0007E+00 rms: 5.9935E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 52 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-PT-LL-10.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9947E-01 rms: 5.9840E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 53 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-NL-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 19 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 200 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0032E+00 rms: 5.2306E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 54 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-NL-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 16 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9655E-01 rms: 5.3287E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 55 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-NL-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0004E+00 rms: 5.8358E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 56 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-NL-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 28 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9877E-01 rms: 5.7340E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 57 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-NL-LL-5.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9677E-01 rms: 5.5231E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 58 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-NL-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 420 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0039E+00 rms: 5.6514E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 59 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-NL-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9839E-01 rms: 5.7149E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 60 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-NL-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 1 IO= 21 >>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>>>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 300 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9730E-01 rms: 5.2500E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 61 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-NL-LL-9.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 21 >AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: Task POSSM1 has finished >>>>>>>POSSM1: Task POSSM (release of 31DEC17) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0028E+00 rms: 5.5142E-01 LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 62 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ki710b-NL-LL-10.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 139 POSSM1: Appears to have ended successfully POSSM1: space 31DEC17 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>>>>>AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: Task POSSM1 has finished AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: I WON'T DESTROY ON DEFAULT DISK OR TYPE INDISK, INTYPE= 0 AIPS 1: NO DESTROY AIPS 1: Begin check for any 'standard' scratch files AIPS 1: Scratch files -- destroyed: 0 still active: 0 AIPS 1: Destroyed empty user catalog on disk 2 AIPS 1: User 8888: 90740 messages, oldest written 01-NOV-2017 13:13:38 AIPS 1: Deleted 0 messages AIPS 1: Saved POPS environment in area named 'LASTEXIT' AIPS 1: Session command-line history saved. AIPS 1: space 31DEC17 TST: Cpu= 0.2 Real= 10 IO= 15