START_AIPS: Your initial AIPS printer is the Room 324 PostScript printer two-sided START_AIPS: - system name aoc324/dup, AIPS type PS START_AIPS: User data area assignments: (Using COAOARN-specific default file /home/AIPS/DA00/DADEVS.LIST.COAOARN for DADEVS.PL) Disk 1 (1) is /DATA/SWC000_1 Disk 2 (2) is /DATA/SWC000_2 Disk 3 (3) is /DATA/SWC000_3 Disk 4 (4) is /DATA/SWC000_4 Tape assignments: Tape 1 is REMOTE Tape 2 is REMOTE START_AIPS: Starting TPMON daemons on SWC000 asynchronously... ================================ AIPS NEWS =============================== ------------------------------ 2018-12-02 TST is 31DEC20 NEW is 31DEC19 OLD is 31DEC18 ------------------------------ The remaining members of the AIPS group can be contacted directly by email to daip@nrao.edu. The contact person in Socorro is Eric Greisen, backed up by Lorant Sjouwerman and Amy Mioduszewski. ============================================================================ ********************************************************************** * Do not store any files under the /home/AIPS area. All such files, * * when found, will be deleted without notice. * ********************************************************************** Starting up 31DEC23 AIPS with normal priority ?>>>>>>>>>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history *not* recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: FITLD: Task to store an image or UV data from a FITS tape AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INTAPE 1 Input tape drive # (0 => 1) AIPS 3: NFILES 0 # of files to advance on tape AIPS 3: DATAIN 'INPUT:ki2211i.idifits' Disk file name AIPS 3: OUTNAME 'KI2211I' File name (name) AIPS 3: OUTCLASS 'UVDATA' File name (class) AIPS 3: OUTSEQ 0 File name (seq. #) AIPS 3: 0 => highest unique number AIPS 3: => matching (on VLBA) AIPS 3: -1 => FITS tape value AIPS 3: OUTDISK 1 Disk drive # (0 => any) AIPS 3: OPTYPE ' ' Type of data to load, AIPS 3: ' ' => all types AIPS 3: 'UV' => UV data AIPS 3: 'IM' => images AIPS 3: NCOUNT 0 Number of files to load. AIPS 3: DOTABLE 1 True (1.0) means load tables AIPS 3: for images. AIPS 3: DOUVCOMP -1 >0 => compressed data (FITS) AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** ##FITLD3: Task FITLD (release of 31DEC23) begins FITLD3: Create KI2211I .UVDATA. 1 (UV) on disk 1 cno 1612 FITLD3: Sky frequencies (MHz) before re-ordering occurs: FITLD3: Incoming FREQID # 1 FITLD3: 24228.00 24260.00 24292.00 24324.00 FITLD3: 24356.00 24388.00 24420.00 24452.00 FITLD3: 24484.00 24516.00 24548.00 24580.00 FITLD3: 24612.00 24644.00 24676.00 24708.00 FITLD3: CL table interval set at 0.10 minutes FITLD3: !!!!!!!!!!! FITLD3: Digital corrections being performed FITLD3: Total power corrected even if no zero-padding FITLD3: !!!!!!!!!!! FITLD3: Current file has 3540 visibilities FITLD3: File ref. freq: 24228.00 MHz FITLD3: Found 0454+844 at 0/15:27:33 src # 1 FITLD3: fqid # 1 FITLD3: Found 1738+476 at 0/15:29:14 src # 2 FITLD3: Found 0016+731 at 0/15:30:47 src # 3 FITLD3: Found 1954+513 at 0/15:32:13 src # 4 FITLD3: Found 0529+483 at 0/15:34:02 src # 5 FITLD3: Found 0955+476 at 0/15:36:17 src # 6 FITLD3: Found 0556+238 at 0/15:38:55 src # 7 FITLD3: Found 0515+208 at 0/15:40:03 src # 8 FITLD3: UV table spanned time: 0/15:27:33 - 0/15:40:41 FITLD3: 3540 vis. written FITLD3: Image=MULTI (UV) Filename=KI2211I .UVDATA. 1 FITLD3: Telescope=VLBA Receiver=VLBA FITLD3: Observer=KI2211 User #= 8888 FITLD3: Observ. date=03-NOV-2022 Map date=14-DEC-2022 FITLD3: # visibilities 3540 Sort order TB FITLD3: Rand axes: UU-L-SIN VV-L-SIN WW-L-SIN TIME1 SUBARRAY FITLD3: SOURCE FREQSEL INTTIM GATEID ANTENNA1 ANTENNA2 FITLD3: CORR-ID FITLD3: ---------------------------------------------------------------- FITLD3: Type Pixels Coord value at Pixel Coord incr Rotat FITLD3: COMPLEX 3 1.0000000E+00 1.00 1.0000000E+00 0.00 FITLD3: STOKES 1 -2.0000000E+00 1.00 -1.0000000E+00 0.00 FITLD3: FREQ 128 2.4228000E+10 1.00 2.5000000E+05 0.00 FITLD3: IF 16 1.0000000E+00 1.00 1.0000000E+00 0.00 FITLD3: RA 1 00 00 00.000 1.00 0.000000 0.00 FITLD3: DEC 1 00 00 00.000 1.00 0.000000 0.00 FITLD3: ---------------------------------------------------------------- FITLD3: Coordinate equinox 2000.00 FITLD3: Maximum version number of extension files of type HI is 1 FITLD3: Maximum version number of extension files of type AT is 1 FITLD3: Maximum version number of extension files of type IM is 1 FITLD3: Maximum version number of extension files of type CT is 1 FITLD3: Maximum version number of extension files of type MC is 1 FITLD3: Maximum version number of extension files of type NX is 1 FITLD3: Maximum version number of extension files of type CL is 1 FITLD3: Maximum version number of extension files of type GC is 1 LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! FITLD3: Maximum version number of extension files of type WX is 1 FITLD3: Maximum version number of extension files of type TY is 1 FITLD3: Maximum version number of extension files of type FQ is 1 FITLD3: Maximum version number of extension files of type AN is 1 FITLD3: Maximum version number of extension files of type SU is 1 FITLD3: Maximum version number of extension files of type CQ is 1 FITLD3: Maximum version number of extension files of type FG is 1 FITLD3: Appears to have ended successfully FITLD3: swc000 31DEC23 TST: Cpu= 2.7 Real= 3 IO= 117 >>>>>>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history *not* recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: FITLD: Task to store an image or UV data from a FITS tape AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INTAPE 1 Input tape drive # (0 => 1) AIPS 3: NFILES 0 # of files to advance on tape AIPS 3: DATAIN 'INPUT:ki2211i.idifits' Disk file name AIPS 3: OUTNAME 'KI2211I' File name (name) AIPS 3: OUTCLASS 'UVDATA' File name (class) AIPS 3: OUTSEQ 0 File name (seq. #) AIPS 3: 0 => highest unique number AIPS 3: => matching (on VLBA) AIPS 3: -1 => FITS tape value AIPS 3: OUTDISK 1 Disk drive # (0 => any) AIPS 3: OPTYPE ' ' Type of data to load, AIPS 3: ' ' => all types AIPS 3: 'UV' => UV data AIPS 3: 'IM' => images AIPS 3: NCOUNT 0 Number of files to load. AIPS 3: DOTABLE 1 True (1.0) means load tables AIPS 3: for images. AIPS 3: DOUVCOMP -1 >0 => compressed data (FITS) AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task FITLD3 has finished AIPS 3: Disk 1 No files needed renumbering AIPS 3: FITLD3 was not found to be running AIPS 3: INDXR Task to index a uv data base. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: INFILE *all ' ' Input file for forced scan AIPS 3: breaks AIPS 3: PRTLEV 0 Print level AIPS 3: CPARM 0 0 1=> max. time gap (min). AIPS 3: 0.1 1 0 => use self-adaptive AIPS 3: *rest 0 method, like other tasks AIPS 3: 2=> max scan length (min). AIPS 3: 0 => 60 min AIPS 3: 3=> CL/CS entry interval in AIPS 3: minutes. 0 => 5 min, AIPS 3: < 0 => don't create a AIPS 3: new table. AIPS 3: 4=> VLBA only: recalculate AIPS 3: CL entry group delays AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** #INDXR3: Task INDXR (release of 31DEC23) begins INDXR3: A CL table already exists: a new one will not be created INDXR3: At visibility record 1 INDXR3: Appears to have ended successfully INDXR3: swc000 31DEC23 TST: Cpu= 0.1 Real= 0 IO= 85 #>>>>>>>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history *not* recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: FITLD: Task to store an image or UV data from a FITS tape AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INTAPE 1 Input tape drive # (0 => 1) AIPS 3: NFILES 0 # of files to advance on tape AIPS 3: DATAIN 'INPUT:ki2211i.idifits' Disk file name AIPS 3: OUTNAME 'KI2211I' File name (name) AIPS 3: OUTCLASS 'UVDATA' File name (class) AIPS 3: OUTSEQ 0 File name (seq. #) AIPS 3: 0 => highest unique number AIPS 3: => matching (on VLBA) AIPS 3: -1 => FITS tape value AIPS 3: OUTDISK 1 Disk drive # (0 => any) AIPS 3: OPTYPE ' ' Type of data to load, AIPS 3: ' ' => all types AIPS 3: 'UV' => UV data AIPS 3: 'IM' => images AIPS 3: NCOUNT 0 Number of files to load. AIPS 3: DOTABLE 1 True (1.0) means load tables AIPS 3: for images. AIPS 3: DOUVCOMP -1 >0 => compressed data (FITS) AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task FITLD3 has finished AIPS 3: Disk 1 No files needed renumbering AIPS 3: FITLD3 was not found to be running AIPS 3: INDXR Task to index a uv data base. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: INFILE *all ' ' Input file for forced scan AIPS 3: breaks AIPS 3: PRTLEV 0 Print level AIPS 3: CPARM 0 0 1=> max. time gap (min). AIPS 3: 0.1 1 0 => use self-adaptive AIPS 3: *rest 0 method, like other tasks AIPS 3: 2=> max scan length (min). AIPS 3: 0 => 60 min AIPS 3: 3=> CL/CS entry interval in AIPS 3: minutes. 0 => 5 min, AIPS 3: < 0 => don't create a AIPS 3: new table. AIPS 3: 4=> VLBA only: recalculate AIPS 3: CL entry group delays AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: INDXR3 was not found to be running AIPS 3: LISTR: Task to print UV data and calibration tables. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INNAME 'KI2211I' UV data (name). AIPS 3: INCLASS 'UVDATA' UV data (class). AIPS 3: INSEQ 0 UV data (seq. #). 0 => high AIPS 3: INDISK 0 Disk unit #. 0 => any AIPS 3: OPTYPE 'SCAN' List type: AIPS 3: 'MATX','LIST','GAIN','SCAN' AIPS 3: 'EFST','SEFD' special GAINs AIPS 3: INEXT ' ' CL, SN, TY. SY for 'GAIN' AIPS 3: INVERS 0 CL, SN, TY, SY table version AIPS 3: SOURCES *all ' ' Source list AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: TIMERANG *all 0 Time range to list AIPS 3: STOKES ' ' Stokes type to list. AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: None selected => 1. AIPS 3: BIF 0 Lowest IF number 0=1 AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** ##LISTR3: Task LISTR (release of 31DEC23) begins LISTR3: ZTXOP2: using translated file name = LISTR3: ZTXOP2: output//ki2211i_listr_scan.txt LISTR3: Appears to have ended successfully LISTR3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 >>>>>>>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history *not* recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: FITLD: Task to store an image or UV data from a FITS tape AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INTAPE 1 Input tape drive # (0 => 1) AIPS 3: NFILES 0 # of files to advance on tape AIPS 3: DATAIN 'INPUT:ki2211i.idifits' Disk file name AIPS 3: OUTNAME 'KI2211I' File name (name) AIPS 3: OUTCLASS 'UVDATA' File name (class) AIPS 3: OUTSEQ 0 File name (seq. #) AIPS 3: 0 => highest unique number AIPS 3: => matching (on VLBA) AIPS 3: -1 => FITS tape value AIPS 3: OUTDISK 1 Disk drive # (0 => any) AIPS 3: OPTYPE ' ' Type of data to load, AIPS 3: ' ' => all types AIPS 3: 'UV' => UV data AIPS 3: 'IM' => images AIPS 3: NCOUNT 0 Number of files to load. AIPS 3: DOTABLE 1 True (1.0) means load tables AIPS 3: for images. AIPS 3: DOUVCOMP -1 >0 => compressed data (FITS) AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task FITLD3 has finished AIPS 3: Disk 1 No files needed renumbering AIPS 3: FITLD3 was not found to be running AIPS 3: INDXR Task to index a uv data base. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: INFILE *all ' ' Input file for forced scan AIPS 3: breaks AIPS 3: PRTLEV 0 Print level AIPS 3: CPARM 0 0 1=> max. time gap (min). AIPS 3: 0.1 1 0 => use self-adaptive AIPS 3: *rest 0 method, like other tasks AIPS 3: 2=> max scan length (min). AIPS 3: 0 => 60 min AIPS 3: 3=> CL/CS entry interval in AIPS 3: minutes. 0 => 5 min, AIPS 3: < 0 => don't create a AIPS 3: new table. AIPS 3: 4=> VLBA only: recalculate AIPS 3: CL entry group delays AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: INDXR3 was not found to be running AIPS 3: LISTR: Task to print UV data and calibration tables. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INNAME 'KI2211I' UV data (name). AIPS 3: INCLASS 'UVDATA' UV data (class). AIPS 3: INSEQ 0 UV data (seq. #). 0 => high AIPS 3: INDISK 0 Disk unit #. 0 => any AIPS 3: OPTYPE 'SCAN' List type: AIPS 3: 'MATX','LIST','GAIN','SCAN' AIPS 3: 'EFST','SEFD' special GAINs AIPS 3: INEXT ' ' CL, SN, TY. SY for 'GAIN' AIPS 3: INVERS 0 CL, SN, TY, SY table version AIPS 3: SOURCES *all ' ' Source list AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: TIMERANG *all 0 Time range to list AIPS 3: STOKES ' ' Stokes type to list. AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: None selected => 1. AIPS 3: BIF 0 Lowest IF number 0=1 AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task LISTR3 has finished AIPS 3: ACCOR Correct cross correlations using auto correlations AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: FLAGVER 0 Flag table version to apply AIPS 3: 0 -> highest AIPS 3: TIMERANG *all 0 Timerange: AIPS 3: 1-4 = start day,hr,min,sec AIPS 3: 5-8 = end day,hr,min,sec AIPS 3: SOLINT 2 Solution interval (min) AIPS 3: .GT.0 => no pay attention AIPS 3: on scans AIPS 3: .LT.0 => SOLINT=ABS(SOLINT) AIPS 3: and average is terminated AIPS 3: at the end of scans AIPS 3: 0 => -2 min; AIPS 3: see help AIPS 3: BADDISK *all 0 Disks to avoid for scratch >ACCOR3: Task ACCOR (release of 31DEC23) begins ACCOR3: Writing to SN table 1 ACCOR3: UVGET: Using flag table version 1 to edit data ACCOR3: Not calibrating gains bandpass polarization ACCOR3: At autocorrelation visibility record 1 ACCOR3: Appears to have ended successfully ACCOR3: swc000 31DEC23 TST: Cpu= 0.1 Real= 0 IO= 84 >>>>>>>>>>>>>>>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history *not* recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: FITLD: Task to store an image or UV data from a FITS tape AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INTAPE 1 Input tape drive # (0 => 1) AIPS 3: NFILES 0 # of files to advance on tape AIPS 3: DATAIN 'INPUT:ki2211i.idifits' Disk file name AIPS 3: OUTNAME 'KI2211I' File name (name) AIPS 3: OUTCLASS 'UVDATA' File name (class) AIPS 3: OUTSEQ 0 File name (seq. #) AIPS 3: 0 => highest unique number AIPS 3: => matching (on VLBA) AIPS 3: -1 => FITS tape value AIPS 3: OUTDISK 1 Disk drive # (0 => any) AIPS 3: OPTYPE ' ' Type of data to load, AIPS 3: ' ' => all types AIPS 3: 'UV' => UV data AIPS 3: 'IM' => images AIPS 3: NCOUNT 0 Number of files to load. AIPS 3: DOTABLE 1 True (1.0) means load tables AIPS 3: for images. AIPS 3: DOUVCOMP -1 >0 => compressed data (FITS) AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task FITLD3 has finished AIPS 3: Disk 1 No files needed renumbering AIPS 3: FITLD3 was not found to be running AIPS 3: INDXR Task to index a uv data base. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: INFILE *all ' ' Input file for forced scan AIPS 3: breaks AIPS 3: PRTLEV 0 Print level AIPS 3: CPARM 0 0 1=> max. time gap (min). AIPS 3: 0.1 1 0 => use self-adaptive AIPS 3: *rest 0 method, like other tasks AIPS 3: 2=> max scan length (min). AIPS 3: 0 => 60 min AIPS 3: 3=> CL/CS entry interval in AIPS 3: minutes. 0 => 5 min, AIPS 3: < 0 => don't create a AIPS 3: new table. AIPS 3: 4=> VLBA only: recalculate AIPS 3: CL entry group delays AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: INDXR3 was not found to be running AIPS 3: LISTR: Task to print UV data and calibration tables. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INNAME 'KI2211I' UV data (name). AIPS 3: INCLASS 'UVDATA' UV data (class). AIPS 3: INSEQ 0 UV data (seq. #). 0 => high AIPS 3: INDISK 0 Disk unit #. 0 => any AIPS 3: OPTYPE 'SCAN' List type: AIPS 3: 'MATX','LIST','GAIN','SCAN' AIPS 3: 'EFST','SEFD' special GAINs AIPS 3: INEXT ' ' CL, SN, TY. SY for 'GAIN' AIPS 3: INVERS 0 CL, SN, TY, SY table version AIPS 3: SOURCES *all ' ' Source list AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: TIMERANG *all 0 Time range to list AIPS 3: STOKES ' ' Stokes type to list. AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: None selected => 1. AIPS 3: BIF 0 Lowest IF number 0=1 AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task LISTR3 has finished AIPS 3: ACCOR Correct cross correlations using auto correlations AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: FLAGVER 0 Flag table version to apply AIPS 3: 0 -> highest AIPS 3: TIMERANG *all 0 Timerange: AIPS 3: 1-4 = start day,hr,min,sec AIPS 3: 5-8 = end day,hr,min,sec AIPS 3: SOLINT 2 Solution interval (min) AIPS 3: .GT.0 => no pay attention AIPS 3: on scans AIPS 3: .LT.0 => SOLINT=ABS(SOLINT) AIPS 3: and average is terminated AIPS 3: at the end of scans AIPS 3: 0 => -2 min; AIPS 3: see help AIPS 3: BADDISK *all 0 Disks to avoid for scratch AIPS 3: Resumes AIPS 3: ACCOR3 was not found to be running AIPS 3: CLCAL Task to manage SN and CL calibration tables AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list to calibrate AIPS 3: SOUCODE ' ' Source "Cal codes" AIPS 3: CALSOUR *all ' ' Cal sources for calibration AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: TIMERANG *all 0 Time range to calibrate AIPS 3: SUBARRAY 0 Subarray, 0=>all, AIPS 3: ANTENNAS *all 0 Antennas selected, 0=> all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: OPCODE 'CALP' Operation 'MERG','CALI', AIPS 3: 'CALP'; ' ' => 'CALP' **** AIPS 3: INTERPOL '2PT' Interpolation function, AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** #CLCAL3: Task CLCAL (release of 31DEC23) begins CLCAL3: Using interpolation mode 2PT CLCAL3: Copied CL file from vol/cno/vers 1 1612 1 to 1 1612 2 CLCAL3: CALSEL: Making room for new CL data by CLCAL3: Deleting CL table no. 2 CLCAL3: Processing SN table 1 CLCAL3: Amplitude only table does not need re-referencing CLCAL3: SNMRG: Merging SN table CLCAL3: SNMRG: Write 37 merged records from 37 input records CLCAL3: SN2CL: Applying SN tables to CL table 1, writing CL table 2 CLCAL3: Appears to have ended successfully CLCAL3: swc000 31DEC23 TST: Cpu= 0.1 Real= 0 IO= 6 #>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history *not* recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: FITLD: Task to store an image or UV data from a FITS tape AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INTAPE 1 Input tape drive # (0 => 1) AIPS 3: NFILES 0 # of files to advance on tape AIPS 3: DATAIN 'INPUT:ki2211i.idifits' Disk file name AIPS 3: OUTNAME 'KI2211I' File name (name) AIPS 3: OUTCLASS 'UVDATA' File name (class) AIPS 3: OUTSEQ 0 File name (seq. #) AIPS 3: 0 => highest unique number AIPS 3: => matching (on VLBA) AIPS 3: -1 => FITS tape value AIPS 3: OUTDISK 1 Disk drive # (0 => any) AIPS 3: OPTYPE ' ' Type of data to load, AIPS 3: ' ' => all types AIPS 3: 'UV' => UV data AIPS 3: 'IM' => images AIPS 3: NCOUNT 0 Number of files to load. AIPS 3: DOTABLE 1 True (1.0) means load tables AIPS 3: for images. AIPS 3: DOUVCOMP -1 >0 => compressed data (FITS) AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task FITLD3 has finished AIPS 3: Disk 1 No files needed renumbering AIPS 3: FITLD3 was not found to be running AIPS 3: INDXR Task to index a uv data base. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: INFILE *all ' ' Input file for forced scan AIPS 3: breaks AIPS 3: PRTLEV 0 Print level AIPS 3: CPARM 0 0 1=> max. time gap (min). AIPS 3: 0.1 1 0 => use self-adaptive AIPS 3: *rest 0 method, like other tasks AIPS 3: 2=> max scan length (min). AIPS 3: 0 => 60 min AIPS 3: 3=> CL/CS entry interval in AIPS 3: minutes. 0 => 5 min, AIPS 3: < 0 => don't create a AIPS 3: new table. AIPS 3: 4=> VLBA only: recalculate AIPS 3: CL entry group delays AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: INDXR3 was not found to be running AIPS 3: LISTR: Task to print UV data and calibration tables. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INNAME 'KI2211I' UV data (name). AIPS 3: INCLASS 'UVDATA' UV data (class). AIPS 3: INSEQ 0 UV data (seq. #). 0 => high AIPS 3: INDISK 0 Disk unit #. 0 => any AIPS 3: OPTYPE 'SCAN' List type: AIPS 3: 'MATX','LIST','GAIN','SCAN' AIPS 3: 'EFST','SEFD' special GAINs AIPS 3: INEXT ' ' CL, SN, TY. SY for 'GAIN' AIPS 3: INVERS 0 CL, SN, TY, SY table version AIPS 3: SOURCES *all ' ' Source list AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: TIMERANG *all 0 Time range to list AIPS 3: STOKES ' ' Stokes type to list. AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: None selected => 1. AIPS 3: BIF 0 Lowest IF number 0=1 AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task LISTR3 has finished AIPS 3: ACCOR Correct cross correlations using auto correlations AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: FLAGVER 0 Flag table version to apply AIPS 3: 0 -> highest AIPS 3: TIMERANG *all 0 Timerange: AIPS 3: 1-4 = start day,hr,min,sec AIPS 3: 5-8 = end day,hr,min,sec AIPS 3: SOLINT 2 Solution interval (min) AIPS 3: .GT.0 => no pay attention AIPS 3: on scans AIPS 3: .LT.0 => SOLINT=ABS(SOLINT) AIPS 3: and average is terminated AIPS 3: at the end of scans AIPS 3: 0 => -2 min; AIPS 3: see help AIPS 3: BADDISK *all 0 Disks to avoid for scratch AIPS 3: Resumes AIPS 3: ACCOR3 was not found to be running AIPS 3: CLCAL Task to manage SN and CL calibration tables AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list to calibrate AIPS 3: SOUCODE ' ' Source "Cal codes" AIPS 3: CALSOUR *all ' ' Cal sources for calibration AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: TIMERANG *all 0 Time range to calibrate AIPS 3: SUBARRAY 0 Subarray, 0=>all, AIPS 3: ANTENNAS *all 0 Antennas selected, 0=> all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: OPCODE 'CALP' Operation 'MERG','CALI', AIPS 3: 'CALP'; ' ' => 'CALP' **** AIPS 3: INTERPOL '2PT' Interpolation function, AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes >AIPS 3: CLCAL3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Begin check for any 'standard' scratch files AIPS 3: Scratch files -- destroyed: 0 still active: 0 AIPS 3: Destroyed empty user catalog on disk 2 AIPS 3: Destroyed empty user catalog on disk 3 AIPS 3: Destroyed empty user catalog on disk 4 AIPS 3: User 8888:208955 messages, oldest written 13-DEC-2022 08:04:40 AIPS 3: Deleted 0 messages AIPS 3: Saved POPS environment in area named 'LASTEXIT' AIPS 3: Session command-line history saved. AIPS 3: swc000 31DEC23 TST: Cpu= 0.1 Real= 4 IO= 30