START_AIPS: Your initial AIPS printer is the Room 324 PostScript printer two-sided START_AIPS: - system name aoc324/dup, AIPS type PS START_AIPS: User data area assignments: (Using COAOARN-specific default file /home/AIPS/DA00/DADEVS.LIST.COAOARN for DADEVS.PL) Disk 1 (1) is /DATA/SWC000_1 Disk 2 (2) is /DATA/SWC000_2 Disk 3 (3) is /DATA/SWC000_3 Disk 4 (4) is /DATA/SWC000_4 Tape assignments: Tape 1 is REMOTE Tape 2 is REMOTE START_AIPS: Starting TPMON daemons on SWC000 asynchronously... ================================ AIPS NEWS =============================== ------------------------------ 2018-12-02 TST is 31DEC20 NEW is 31DEC19 OLD is 31DEC18 ------------------------------ The remaining members of the AIPS group can be contacted directly by email to daip@nrao.edu. The contact person in Socorro is Eric Greisen, backed up by Lorant Sjouwerman and Amy Mioduszewski. ============================================================================ ********************************************************************** * Do not store any files under the /home/AIPS area. All such files, * * when found, will be deleted without notice. * ********************************************************************** Starting up 31DEC23 AIPS with normal priority ?>>>>>>>>>>>>>>>>>>>>>>>>>##AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** #>>>>#>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) NL POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9908E-01 rms: 5.0317E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 1 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-NL-LL-1.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 19 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) NL POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0021E+00 rms: 4.9661E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM3: Plot file version 2 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-NL-LL-2.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 28 >>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) NL POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9864E-01 rms: 4.9946E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 3 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-NL-LL-3.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 17 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 120 POSSM3: POSSUV: for antenna(s) NL POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9947E-01 rms: 4.9552E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 4 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-NL-LL-4.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 17 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 16 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) NL POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0014E+00 rms: 4.9694E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 5 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-NL-LL-5.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) NL POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0008E+00 rms: 5.0132E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 6 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-NL-LL-6.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 420 POSSM3: POSSUV: for antenna(s) NL POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9937E-01 rms: 4.8991E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 7 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-NL-LL-7.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 16 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) NL POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) NL POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) NL POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) NL POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) NL POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) NL POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) NL POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) NL POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) NL POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) NL POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) NL POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) NL POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) NL POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) NL POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) NL POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) NL POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 6 >>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 19 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) LA POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0013E+00 rms: 4.9132E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 8 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-LA-LL-1.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 15 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) LA POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9981E-01 rms: 4.8687E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 9 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-LA-LL-2.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 19 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) LA POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0011E+00 rms: 4.9464E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 10 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-LA-LL-3.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 17 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) LA POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) LA POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) LA POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) LA POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) LA POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) LA POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) LA POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) LA POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) LA POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) LA POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) LA POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) LA POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) LA POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) LA POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) LA POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) LA POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 17 >>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 19 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) LA POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0001E+00 rms: 4.9299E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 11 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-LA-LL-5.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) LA POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0076E+00 rms: 4.9850E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 12 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-LA-LL-6.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 16 visibilities from total data set of 420 POSSM3: POSSUV: for antenna(s) LA POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0009E+00 rms: 4.8403E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 13 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-LA-LL-7.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 16 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 18 visibilities from total data set of 200 POSSM3: POSSUV: for antenna(s) LA POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9696E-01 rms: 4.8187E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 14 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-LA-LL-8.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 6 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) OV POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9889E-01 rms: 4.7628E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 15 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-OV-LL-1.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 19 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) OV POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0047E+00 rms: 4.7053E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 16 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-OV-LL-2.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) OV POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9684E-01 rms: 4.7348E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 17 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-OV-LL-3.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 17 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) OV POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) OV POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) OV POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) OV POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) OV POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) OV POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) OV POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) OV POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) OV POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) OV POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) OV POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) OV POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) OV POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) OV POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) OV POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) OV POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 17 >>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) OV POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9915E-01 rms: 4.6923E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 18 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-OV-LL-5.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 28 >>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) OV POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0010E+00 rms: 4.7482E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 19 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-OV-LL-6.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 420 POSSM3: POSSUV: for antenna(s) OV POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0002E+00 rms: 4.6263E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 20 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-OV-LL-7.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 16 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 19 visibilities from total data set of 200 POSSM3: POSSUV: for antenna(s) OV POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9740E-01 rms: 4.5971E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 21 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-OV-LL-8.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 6 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) PT POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0018E+00 rms: 4.6953E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 22 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-PT-LL-1.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 18 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) PT POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9631E-01 rms: 4.5935E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 23 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-PT-LL-2.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.1 Real= 1 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) PT POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0024E+00 rms: 4.6612E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 24 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-PT-LL-3.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 17 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) PT POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) PT POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) PT POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) PT POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) PT POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) PT POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) PT POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) PT POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) PT POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) PT POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) PT POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) PT POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) PT POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) PT POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) PT POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) PT POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 17 >>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) PT POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9919E-01 rms: 4.6282E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 25 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-PT-LL-5.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) PT POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9965E-01 rms: 4.6849E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 26 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-PT-LL-6.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 24 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 420 POSSM3: POSSUV: for antenna(s) PT POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0049E+00 rms: 4.5527E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 27 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-PT-LL-7.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 16 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 19 visibilities from total data set of 200 POSSM3: POSSUV: for antenna(s) PT POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9221E-01 rms: 4.5109E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 28 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-PT-LL-8.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 6 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) FD POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9985E-01 rms: 4.7576E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 29 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-FD-LL-1.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 19 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) FD POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0004E+00 rms: 4.6720E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 30 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-FD-LL-2.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) FD POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9935E-01 rms: 4.7349E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 31 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-FD-LL-3.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 17 >>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) FD POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 17 >>>>>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) FD POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9984E-01 rms: 4.6943E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 32 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-FD-LL-5.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) FD POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0010E+00 rms: 4.7746E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 33 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-FD-LL-6.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 420 POSSM3: POSSUV: for antenna(s) FD POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0001E+00 rms: 4.6157E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 34 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-FD-LL-7.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 16 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) FD POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) FD POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 6 >>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 27 >>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 17 >>>>>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 17 >>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 27 >>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 16 >>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) VLA:AN06 POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 6 >>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) HN POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9885E-01 rms: 4.8799E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 35 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-HN-LL-1.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.1 Real= 0 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 19 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) HN POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0026E+00 rms: 4.8065E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 36 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-HN-LL-2.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) HN POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9959E-01 rms: 4.8223E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 37 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-HN-LL-3.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 17 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 120 POSSM3: POSSUV: for antenna(s) HN POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 9.9850E-01 rms: 4.7835E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 38 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-HN-LL-4.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 17 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) HN POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0015E+00 rms: 4.7897E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 39 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-HN-LL-5.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>>>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: at visibility number 1 POSSM3: Averaged 20 visibilities from total data set of 560 POSSM3: POSSUV: for antenna(s) HN POSSM3: Will plot 128 channels * 16 IFs polarization LL POSSM3: FILLPL: Real part mean: 1.0004E+00 rms: 4.8113E-01 POSSM3: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM3: Plot file version 40 created POSSM3: ZTXOP2: using translated file name = POSSM3: ZTXOP2: output//ki2211i-HN-LL-6.txt POSSM3: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM3: GFINIS: number records used 126 POSSM3: Appears to have ended successfully POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) HN POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 2 IO= 16 >>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running >>>>>>>POSSM3: Task POSSM (release of 31DEC23) begins POSSM3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM3: UVGET: Using flag table version 1 to edit data POSSM3: Calibrating gains POSSM3: Not calibrating bandpass polarization POSSM3: POSSUV: Warning, No valid data for IF: 1 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 2 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 3 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 4 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 5 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 6 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 7 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 8 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 9 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 10 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 11 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 12 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 13 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 14 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 15 POSSM3: POSSUV: for antenna(s) HN POSSM3: POSSUV: Warning, No valid data for IF: 16 POSSM3: POSSUV: for antenna(s) HN POSSM3: Purports to die of UNNATURAL causes POSSM3: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 6 >>>>>>>>AIPS 3: You are NOT assigned a TV device or server AIPS 3: You are NOT assigned a graphics device or server AIPS 3: Enter user ID number AIPS 3: 31DEC23 AIPS: AIPS 3: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 3: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 3: for details, type HELP GNUGPL AIPS 3: This is free software, and you are welcome to redistribute it AIPS 3: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 3: Previous session command-line history recovered. AIPS 3: TAB-key completions enabled, type HELP READLINE for details. AIPS 3: Recovered POPS environment from last exit AIPS 3: POSSM Task to plot total and cross-power spectra. AIPS 3: Adverbs Values Comments AIPS 3: ---------------------------------------------------------------- AIPS 3: USERID 0 User number - ignored AIPS 3: INNAME 'KI2211I' Input UV file name (name) AIPS 3: INCLASS 'UVDATA' Input UV file name (class) AIPS 3: INSEQ 0 Input UV file name (seq. #) AIPS 3: INDISK 0 Input UV file disk unit # AIPS 3: SOURCES *all ' ' Source list AIPS 3: QUAL -1 Source qualifier -1=>all AIPS 3: CALCODE ' ' Calibrator code ' '=>all AIPS 3: SELBAND -1 Bandwidth to select (kHz) AIPS 3: SELFREQ -1 Frequency to select (MHz) AIPS 3: FREQID -1 Freq. ID to select. AIPS 3: UVRANGE 0 0 UV range to be plotted AIPS 3: TIMERANG *all 0 Time range to be plotted AIPS 3: STOKES ' ' Stokes type(s) to select. AIPS 3: BIF 0 Lowest IF number 0=>all AIPS 3: EIF 0 Highest IF number 0=>all AIPS 3: BCHAN 0 Lowest channel number 0=>all AIPS 3: ECHAN 0 Highest channel number 0=>all AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: SUBARRAY 0 Subarray, 0=>1 AIPS 3: ANTENNAS *all 0 Antennas to select AIPS 3: BASELINE *all 0 Baselines with ANTENNAS AIPS 3: DOCALIB 1 > 0 calibrate data & weights AIPS 3: > 99 do NOT calibrate weights AIPS 3: GAINUSE 0 CL (or SN) table to apply AIPS 3: DOPOL -1 If >0 correct polarization. AIPS 3: PDVER 0 PD table to apply (DOPOL>0) AIPS 3: BLVER -1 BL table to apply. AIPS 3: FLAGVER 0 Flag table version AIPS 3: DOBAND -1 If >0 apply bandpass cal. AIPS 3: Method used depends on value AIPS 3: of DOBAND (see HELP file). AIPS 3: BPVER -1 Bandpass table version AIPS 3: SMOOTH *all 0 Smoothing function. SEE AIPS 3: POSSM HELP SPECIAL VALUES AIPS 3: SHIFT 0 0 Position shift: AIPS 3: RA, Dec (arcsec) AIPS 3: 0 => no shift AIPS 3: APARM 1 1 Control information: AIPS 3: 0 0 1: < 0 => scalar average AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: -180 180 >= 0 => vector average AIPS 3: 1 1 2: = 0 => self-scale AIPS 3: 1 0 > 0 => fixed scale AIPS 3: (use APARM(3-6)) AIPS 3: 3: min. amplitude AIPS 3: 4: max. amplitude AIPS 3: 5: min. phase (degrees) AIPS 3: 6: max. phase AIPS 3: 7: x-axis labelling AIPS 3: = 0 = > in channels. AIPS 3: = 1 = > in Hz (or secs AIPS 3: if corr. fn) AIPS 3: = 2 = > in m/s AIPS 3: 8: = 0 => plot cross power AIPS 3: = 1 => plot total power AIPS 3: = 2 => plot BP table AIPS 3: version BPVER AIPS 3: = 3 => plot ACF AIPS 3: = 4 => plot XCF AIPS 3: = 5 => plot BD table AIPS 3: version BPVER AIPS 3: ** press RETURN for more, enter Q or next line to quit print ** AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: Task POSSM3 has finished AIPS 3: Resumes AIPS 3: POSSM3 was not found to be running AIPS 3: Resumes >>>>AIPS 3: POSSM3 was not found to be running AIPS 3: I WON'T DESTROY ON DEFAULT DISK OR TYPE INDISK, INTYPE= 0 AIPS 3: NO DESTROY AIPS 3: Begin check for any 'standard' scratch files AIPS 3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND AIPS 3: DESCR: ERROR 1 DISK 2 SEARCHING CATALOG AIPS 3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND AIPS 3: DESCR: ERROR 1 DISK 3 SEARCHING CATALOG AIPS 3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 3: DESCR: ERROR 1 DISK 4 SEARCHING CATALOG AIPS 3: Scratch files -- destroyed: 0 still active: 0 AIPS 3: DESCR: encountered 3 errors in doing this AIPS 3: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND AIPS 3: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND AIPS 3: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND AIPS 3: User 8888:217356 messages, oldest written 13-DEC-2022 08:04:40 AIPS 3: Deleted 0 messages AIPS 3: Saved POPS environment in area named 'LASTEXIT' AIPS 3: Session command-line history saved. AIPS 3: swc000 31DEC23 TST: Cpu= 0.3 Real= 30 IO= 31