START_AIPS: Your initial AIPS printer is the Room 324 PostScript printer two-sided START_AIPS: - system name aoc324/dup, AIPS type PS START_AIPS: User data area assignments: (Using COAOARN-specific default file /home/AIPS/DA00/DADEVS.LIST.COAOARN for DADEVS.PL) Disk 1 (1) is /DATA/SWC000_1 Disk 2 (2) is /DATA/SWC000_2 Disk 3 (3) is /DATA/SWC000_3 Disk 4 (4) is /DATA/SWC000_4 Tape assignments: Tape 1 is REMOTE Tape 2 is REMOTE START_AIPS: Starting TPMON daemons on SWC000 asynchronously... ================================ AIPS NEWS =============================== ------------------------------ 2018-12-02 TST is 31DEC20 NEW is 31DEC19 OLD is 31DEC18 ------------------------------ The remaining members of the AIPS group can be contacted directly by email to daip@nrao.edu. The contact person in Socorro is Eric Greisen, backed up by Lorant Sjouwerman and Amy Mioduszewski. ============================================================================ ********************************************************************** * Do not store any files under the /home/AIPS area. All such files, * * when found, will be deleted without notice. * ********************************************************************** Starting up 31DEC23 AIPS with normal priority ?>>>>>>>>>>>>>>>>>>>>>>>>>##AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** #>>>>#>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9992E-01 rms: 4.9180E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 1 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-NL-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0010E+00 rms: 4.9964E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 2 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-NL-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: FILLPL: Real part mean: 9.9640E-01 rms: 5.0009E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 3 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-NL-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.1 Real= 0 IO= 28 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0032E+00 rms: 4.9567E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 4 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-NL-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 22 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 18 visibilities from total data set of 300 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0002E+00 rms: 4.9561E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 5 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-NL-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 13 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 19 visibilities from total data set of 200 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9853E-01 rms: 5.0160E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 6 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-NL-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 19 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0001E+00 rms: 5.0262E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 7 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-NL-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 16 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0006E+00 rms: 4.9746E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 8 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-NL-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 24 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 18 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9912E-01 rms: 5.0355E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 9 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-NL-LL-9.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 15 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0011E+00 rms: 4.8823E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 10 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-LA-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.1 Real= 0 IO= 24 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0017E+00 rms: 4.9638E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 11 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-LA-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0002E+00 rms: 4.9732E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 12 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-LA-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 28 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 19 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9886E-01 rms: 4.9163E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 13 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-LA-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 22 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 18 visibilities from total data set of 300 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0007E+00 rms: 4.8859E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 14 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-LA-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 13 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) LA POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) LA POSSM2: Purports to die of UNNATURAL causes POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 6 >>>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9897E-01 rms: 4.9339E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 15 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-LA-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 19 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0028E+00 rms: 4.9059E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 16 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-LA-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 19 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9950E-01 rms: 4.9860E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 17 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-LA-LL-9.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 15 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: Purports to die of UNNATURAL causes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: Purports to die of UNNATURAL causes POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 27 >>>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: Purports to die of UNNATURAL causes POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 27 >>>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: Purports to die of UNNATURAL causes POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 21 >>>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: Purports to die of UNNATURAL causes POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 8 >>>>>>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: Purports to die of UNNATURAL causes POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 6 >>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: Purports to die of UNNATURAL causes POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: Purports to die of UNNATURAL causes POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 11 >>>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) VLA:AN06 LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) VLA:AN06 POSSM2: Purports to die of UNNATURAL causes POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 14 >>>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0002E+00 rms: 4.5356E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 18 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-PT-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9684E-01 rms: 4.6721E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 19 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-PT-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0063E+00 rms: 4.7241E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 20 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-PT-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 28 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9647E-01 rms: 4.6517E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 21 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-PT-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.1 Real= 0 IO= 22 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 19 visibilities from total data set of 300 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0007E+00 rms: 4.6330E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 22 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-PT-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 13 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) PT POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) PT POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) PT POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) PT POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) PT POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) PT POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) PT POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) PT POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) PT POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) PT POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) PT POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) PT POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) PT POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) PT POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) PT POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) PT POSSM2: Purports to die of UNNATURAL causes POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 6 >>>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0006E+00 rms: 4.6762E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 23 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-PT-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 19 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0011E+00 rms: 4.6153E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 24 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-PT-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 19 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9929E-01 rms: 4.7256E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 25 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-PT-LL-9.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 15 >>>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0004E+00 rms: 4.7543E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 26 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-FD-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9897E-01 rms: 4.7831E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 27 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-FD-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0009E+00 rms: 4.7731E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 28 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-FD-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 28 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0015E+00 rms: 4.7279E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 29 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-FD-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 22 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) FD POSSM2: Purports to die of UNNATURAL causes POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 8 >>>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) FD POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) FD POSSM2: Purports to die of UNNATURAL causes POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 6 >>>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9991E-01 rms: 4.7643E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 30 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-FD-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 24 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 19 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0003E+00 rms: 4.6873E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 31 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-FD-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 19 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9998E-01 rms: 4.7991E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 32 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-FD-LL-9.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 15 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) OV LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: Purports to die of UNNATURAL causes POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >>>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0014E+00 rms: 4.7990E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 33 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-OV-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9715E-01 rms: 4.7484E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 34 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-OV-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0033E+00 rms: 4.7274E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 35 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-OV-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 22 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 19 visibilities from total data set of 300 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0000E+00 rms: 4.7123E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 36 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-OV-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 13 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 19 visibilities from total data set of 200 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0029E+00 rms: 4.7343E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 37 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-OV-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 19 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: ZOPEN: FILE DA02:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA03:CAD000000.6UW; NOT FOUND POSSM2: ZOPEN: FILE DA04:CAD000000.6UW; NOT FOUND POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9498E-01 rms: 4.7002E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 38 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-OV-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) OV POSSM2: Purports to die of UNNATURAL causes POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 11 >>>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 19 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9999E-01 rms: 4.7242E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 39 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-OV-LL-9.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 15 >>>>>>>AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server AIPS 2: Enter user ID number AIPS 2: 31DEC23 AIPS: AIPS 2: Copyright (C) 1995-2022 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'KI2211H' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0008E+00 rms: 4.7845E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 40 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-HN-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9996E-01 rms: 4.8498E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 41 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-HN-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0011E+00 rms: 4.8563E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 42 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-HN-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 28 >LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9986E-01 rms: 4.8145E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 43 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-HN-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 1 IO= 22 >LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) HN POSSM2: Purports to die of UNNATURAL causes POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 8 >>>>>>>>LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 19 visibilities from total data set of 200 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0015E+00 rms: 4.8462E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 44 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-HN-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 19 >LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 20 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9813E-01 rms: 4.8279E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 45 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-HN-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.1 Real= 1 IO= 24 >LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 19 visibilities from total data set of 420 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9952E-01 rms: 4.7837E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 46 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-HN-LL-8.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 24 >LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC23) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Calibrating gains POSSM2: Not calibrating bandpass polarization POSSM2: POSSUV: at visibility number 1 POSSM2: Averaged 19 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0004E+00 rms: 4.8291E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 47 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ki2211h-HN-LL-9.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 126 POSSM2: Appears to have ended successfully POSSM2: swc000 31DEC23 TST: Cpu= 0.0 Real= 0 IO= 15 >>>>>LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: I WON'T DESTROY ON DEFAULT DISK OR TYPE INDISK, INTYPE= 0 AIPS 2: NO DESTROY AIPS 2: Begin check for any 'standard' scratch files AIPS 2: Scratch files -- destroyed: 0 still active: 0 AIPS 2: Destroyed empty user catalog on disk 2 AIPS 2: Destroyed empty user catalog on disk 3 AIPS 2: Destroyed empty user catalog on disk 4 AIPS 2: User 8888:218154 messages, oldest written 13-DEC-2022 08:04:40 AIPS 2: Deleted 0 messages AIPS 2: Saved POPS environment in area named 'LASTEXIT' AIPS 2: Session command-line history saved. AIPS 2: swc000 31DEC23 TST: Cpu= 0.3 Real= 28 IO= 32