START_AIPS: Your initial AIPS printer is the Room 324 PostScript printer two-sided START_AIPS: - system name aoc324/dup, AIPS type PS START_AIPS: User data area assignments: (Using COAOARN-specific default file /home/AIPS/DA00/DADEVS.LIST.COAOARN for DADEVS.PL) Disk 1 (1) is /DATA/SPACE_1 /DATA/SPACE_2 is currently unavailable. Tape assignments: Tape 1 is REMOTE Tape 2 is REMOTE START_AIPS: Starting TPMON daemons on SPACE asynchronously... ================================ AIPS NEWS =============================== ------------------------------ 2016-12-02 TST is 31DEC15 NEW is 31DEC16 OLD is 31DEC17 ------------------------------ The remaining members of the AIPS group can be contacted directly by email to daip@nrao.edu. The contact person in Socorro is Eric Greisen, backed up by Amy Mioduszewski. ============================================================================ ********************************************************************** * The ~aips/USERS area is intended to be used for small, temporary * * files only. Do not store FITS files or other large data files in * * this area. Such files will be deleted without warning. * * **DO NOT** put any personal files in the /home/AIPS area; they * * will be removed as soon as they are detected. Create a readily * * recognizable directory in ~aips/USERS/ e.g. ~aips/USERS/ * * and put things there. Note that this area is also not for long- * * term storage; anything important should be kept on your personal * * account. OLD FILES ARE DELETED WITHOUT WARNING. * ********************************************************************** Starting up 31DEC18 AIPS with normal priority ?>>>>>>>>>>>>>>>>>>>>>>>>>##AIPS 2: You are NOT assigned a TV device or server AIPS 2: You are NOT assigned a graphics device or server ZMSGOP: FILE DA01:MSD001000.001; NOT FOUND MSGWRT ERROR 2 AT OPEN AIPS 2: Enter user ID number AIPS 2: 31DEC18 AIPS: AIPS 2: Copyright (C) 1995-2018 Associated Universities, Inc. AIPS 2: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 2: for details, type HELP GNUGPL AIPS 2: This is free software, and you are welcome to redistribute it AIPS 2: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 2: Previous session command-line history recovered. AIPS 2: TAB-key completions enabled, type HELP READLINE for details. AIPS 2: Recovered POPS environment from last exit AIPS 2: POSSM Task to plot total and cross-power spectra. AIPS 2: Adverbs Values Comments AIPS 2: ---------------------------------------------------------------- AIPS 2: USERID 0 User number - ignored AIPS 2: INNAME 'CI802I' Input UV file name (name) AIPS 2: INCLASS 'UVDATA' Input UV file name (class) AIPS 2: INSEQ 0 Input UV file name (seq. #) AIPS 2: INDISK 0 Input UV file disk unit # AIPS 2: SOURCES *all ' ' Source list AIPS 2: QUAL -1 Source qualifier -1=>all AIPS 2: CALCODE ' ' Calibrator code ' '=>all AIPS 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2: SELFREQ -1 Frequency to select (MHz) AIPS 2: FREQID -1 Freq. ID to select. AIPS 2: UVRANGE 0 0 UV range to be plotted AIPS 2: TIMERANG *all 0 Time range to be plotted AIPS 2: STOKES ' ' Stokes type(s) to select. AIPS 2: BIF 0 Lowest IF number 0=>all AIPS 2: EIF 0 Highest IF number 0=>all AIPS 2: BCHAN 0 Lowest channel number 0=>all AIPS 2: ECHAN 0 Highest channel number 0=>all AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: SUBARRAY 0 Subarray, 0=>1 AIPS 2: ANTENNAS *all 0 Antennas to select AIPS 2: BASELINE *all 0 Baselines with ANTENNAS AIPS 2: DOCALIB 1 > 0 calibrate data & weights AIPS 2: > 99 do NOT calibrate weights AIPS 2: GAINUSE 0 CL (or SN) table to apply AIPS 2: DOPOL -1 If >0 correct polarization. AIPS 2: PDVER 0 PD table to apply (DOPOL>0) AIPS 2: BLVER -1 BL table to apply. AIPS 2: FLAGVER 0 Flag table version AIPS 2: DOBAND -1 If >0 apply bandpass cal. AIPS 2: Method used depends on value AIPS 2: of DOBAND (see HELP file). AIPS 2: BPVER -1 Bandpass table version AIPS 2: SMOOTH *all 0 Smoothing function. SEE AIPS 2: POSSM HELP SPECIAL VALUES AIPS 2: SHIFT 0 0 Position shift: AIPS 2: RA, Dec (arcsec) AIPS 2: 0 => no shift AIPS 2: APARM 1 1 Control information: AIPS 2: 0 0 1: < 0 => scalar average AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: -180 180 >= 0 => vector average AIPS 2: 1 1 2: = 0 => self-scale AIPS 2: 1 0 > 0 => fixed scale AIPS 2: (use APARM(3-6)) AIPS 2: 3: min. amplitude AIPS 2: 4: max. amplitude AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** #>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9922E-01 rms: 7.9402E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 1 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-LA-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 137 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 39 #>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9918E-01 rms: 8.0261E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 2 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-LA-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 137 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9890E-01 rms: 7.7540E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 3 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-LA-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 136 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0025E+00 rms: 8.0233E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 4 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-LA-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 137 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9905E-01 rms: 8.0360E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 5 created POSSM2: ZTXOP2: using translated file name = LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: ZTXOP2: output//ci802i-LA-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 137 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0009E+00 rms: 7.8944E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 6 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-LA-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 137 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) LA POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9870E-01 rms: 7.8002E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 7 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-LA-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 136 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9989E-01 rms: 9.6320E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 8 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-PT-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.1 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9990E-01 rms: 9.6788E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 9 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-PT-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9954E-01 rms: 9.4953E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 10 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-PT-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 138 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9996E-01 rms: 9.6347E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 11 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-PT-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0019E+00 rms: 9.7166E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 12 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-PT-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.1 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9962E-01 rms: 9.5802E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 13 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-PT-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.1 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: POSSUV: for antenna(s) PT POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0000E+00 rms: 9.6063E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 14 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-PT-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9966E-01 rms: 4.8742E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 15 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-HN-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 16 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9964E-01 rms: 4.8707E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 16 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-HN-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9984E-01 rms: 4.8636E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 17 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-HN-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 16 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0038E+00 rms: 4.8769E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 18 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-HN-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.1 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9509E-01 rms: 4.8529E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 19 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-HN-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) HN POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0014E+00 rms: 4.8879E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 20 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-HN-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) HN POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) HN POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>>>>>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9980E-01 rms: 1.0407E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 21 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-FD-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.1 Real= 0 IO= 39 >AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 16 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9980E-01 rms: 1.0566E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 22 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-FD-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.1 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9994E-01 rms: 9.9122E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 23 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-FD-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0003E+00 rms: 1.0481E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 24 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-FD-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.1 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0001E+00 rms: 1.0555E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 25 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-FD-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9989E-01 rms: 1.0106E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 26 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-FD-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 1 IO= 39 >AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 15 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) FD POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0003E+00 rms: 1.0036E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 27 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-FD-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) MK POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) MK POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9914E-01 rms: 5.3498E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 28 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-MK-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) MK POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) MK POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) MK POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0002E+00 rms: 5.3359E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 29 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-MK-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) MK POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9937E-01 rms: 5.3600E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 30 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-MK-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) MK POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9880E-01 rms: 5.3551E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 31 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-MK-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 39 >AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) MK POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0008E+00 rms: 5.3618E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 32 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-MK-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 140 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9962E-01 rms: 6.2749E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 33 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-OV-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 141 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9959E-01 rms: 6.3788E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 34 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-OV-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 141 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: POSSUV: Warning, No valid data for IF: 1 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 2 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 3 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 4 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 5 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 6 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 7 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 8 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 9 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 10 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 11 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 12 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 13 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 14 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 15 POSSM2: POSSUV: for antenna(s) OV POSSM2: POSSUV: Warning, No valid data for IF: 16 POSSM2: POSSUV: for antenna(s) OV POSSM2: Purports to die of UNNATURAL causes POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9960E-01 rms: 6.3969E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 35 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-OV-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 141 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0002E+00 rms: 6.4224E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 36 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-OV-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 141 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.1 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0015E+00 rms: 6.4059E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 37 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-OV-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 141 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) OV POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9885E-01 rms: 6.4055E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 38 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-OV-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 141 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9935E-01 rms: 1.2665E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 39 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-NL-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 136 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9931E-01 rms: 1.2916E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 40 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-NL-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 136 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9806E-01 rms: 1.2515E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 41 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-NL-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: GFINIS: number records used 136 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0041E+00 rms: 1.2754E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 42 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-NL-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 136 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9820E-01 rms: 1.2815E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 43 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-NL-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 136 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9948E-01 rms: 1.2210E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 44 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-NL-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 141 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>>>>>>>>AIPS 2: 5: min. phase (degrees) AIPS 2: 6: max. phase AIPS 2: 7: x-axis labelling AIPS 2: = 0 = > in channels. AIPS 2: = 1 = > in Hz (or secs AIPS 2: if corr. fn) AIPS 2: = 2 = > in m/s AIPS 2: 8: = 0 => plot cross power AIPS 2: = 1 => plot total power AIPS 2: = 2 => plot BP table AIPS 2: version BPVER AIPS 2: = 3 => plot ACF AIPS 2: = 4 => plot XCF AIPS 2: = 5 => plot BD table AIPS 2: version BPVER AIPS 2: ** press RETURN for more, enter Q or next line to quit print ** AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) NL POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0012E+00 rms: 1.1575E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 45 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-NL-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 141 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >AIPS 2: Task POSSM2 has finished >>>>>>>>>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0011E+00 rms: 8.9241E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 46 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-BR-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 138 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 39 >AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0013E+00 rms: 1.0197E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 47 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-BR-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9874E-01 rms: 8.2914E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 48 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-BR-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 137 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9870E-01 rms: 1.0123E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 49 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-BR-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: FILLPL: Real part mean: 1.0003E+00 rms: 1.0210E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 50 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-BR-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9884E-01 rms: 1.0070E+00 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 51 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-BR-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 17 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) BR POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0016E+00 rms: 9.9374E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 52 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-BR-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 139 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>>>>AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9971E-01 rms: 6.5414E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 53 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-KP-LL-1.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 141 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.1 Real= 0 IO= 39 >>>>>>>>AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9970E-01 rms: 6.6444E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 54 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-KP-LL-2.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 135 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 36 >>>>>>>>AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 560 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9991E-01 rms: 6.3031E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 55 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-KP-LL-3.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 141 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.1 Real= 0 IO= 36 >>>>>>>>AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0024E+00 rms: 6.5617E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 56 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-KP-LL-4.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 135 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 44 >>>>>>>>AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9782E-01 rms: 6.5973E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 57 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-KP-LL-5.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 135 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 1 IO= 44 >>>>>>>>AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running >>>>>>>POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 900 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 9.9932E-01 rms: 6.5562E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 58 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-KP-LL-6.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 135 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 39 >>>>>>>>>>>>>>>AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM2: Task POSSM (release of 31DEC18) begins POSSM2: UVGET: Using flag table version 1 to edit data POSSM2: Averaged 18 visibilities from total data set of 720 POSSM2: POSSUV: for antenna(s) KP POSSM2: Will plot 128 channels * 16 IFs polarization LL POSSM2: FILLPL: Real part mean: 1.0014E+00 rms: 6.5354E-01 POSSM2: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM2: Plot file version 59 created POSSM2: ZTXOP2: using translated file name = POSSM2: ZTXOP2: output//ci802i-KP-LL-7.txt POSSM2: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM2: GFINIS: number records used 141 POSSM2: Appears to have ended successfully POSSM2: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 18 >>>>>AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: Task POSSM2 has finished AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 2: Resumes AIPS 2: POSSM2 was not found to be running AIPS 2: I WON'T DESTROY ON DEFAULT DISK OR TYPE INDISK, INTYPE= 0 AIPS 2: NO DESTROY AIPS 2: Begin check for any 'standard' scratch files AIPS 2: Scratch files -- destroyed: 0 still active: 0 AIPS 2: User 8888: 57566 messages, oldest written 13-MAR-2018 13:11:16 AIPS 2: Deleted 0 messages AIPS 2: Saved POPS environment in area named 'LASTEXIT' AIPS 2: Session command-line history saved. AIPS 2: space 31DEC18 TST: Cpu= 0.2 Real= 15 IO= 11