START_AIPS: Your initial AIPS printer is the Room 324 PostScript printer two-sided START_AIPS: - system name aoc324/dup, AIPS type PS START_AIPS: User data area assignments: (Using COAOARN-specific default file /home/AIPS/DA00/DADEVS.LIST.COAOARN for DADEVS.PL) Disk 1 (1) is /DATA/SPACE_1 Disk 2 (2) is /DATA/SPACE_2 Tape assignments: Tape 1 is REMOTE Tape 2 is REMOTE START_AIPS: Starting TPMON daemons on SPACE asynchronously... ================================ AIPS NEWS =============================== ------------------------------ 2016-12-02 TST is 31DEC15 NEW is 31DEC16 OLD is 31DEC17 ------------------------------ The remaining members of the AIPS group can be contacted directly by email to daip@nrao.edu. The contact person in Socorro is Eric Greisen, backed up by Amy Mioduszewski. ============================================================================ ********************************************************************** * The ~aips/USERS area is intended to be used for small, temporary * * files only. Do not store FITS files or other large data files in * * this area. Such files will be deleted without warning. * * **DO NOT** put any personal files in the /home/AIPS area; they * * will be removed as soon as they are detected. Create a readily * * recognizable directory in ~aips/USERS/ e.g. ~aips/USERS/ * * and put things there. Note that this area is also not for long- * * term storage; anything important should be kept on your personal * * account. OLD FILES ARE DELETED WITHOUT WARNING. * ********************************************************************** Starting up 31DEC18 AIPS with normal priority ?>>>>>>>>>>>>>>>>>>>>>>>>>##AIPS 1: You are NOT assigned a TV device or server AIPS 1: You are NOT assigned a graphics device or server ZMSGOP: FILE DA01:MSD001000.001; NOT FOUND MSGWRT ERROR 2 AT OPEN AIPS 1: Enter user ID number AIPS 1: 31DEC18 AIPS: AIPS 1: Copyright (C) 1995-2018 Associated Universities, Inc. AIPS 1: AIPS comes with ABSOLUTELY NO WARRANTY; AIPS 1: for details, type HELP GNUGPL AIPS 1: This is free software, and you are welcome to redistribute it AIPS 1: under certain conditions; type EXPLAIN GNUGPL for details. AIPS 1: Previous session command-line history recovered. AIPS 1: TAB-key completions enabled, type HELP READLINE for details. AIPS 1: Recovered POPS environment from last exit AIPS 1: POSSM Task to plot total and cross-power spectra. AIPS 1: Adverbs Values Comments AIPS 1: ---------------------------------------------------------------- AIPS 1: USERID 0 User number - ignored AIPS 1: INNAME 'CI712B' Input UV file name (name) AIPS 1: INCLASS 'UVDATA' Input UV file name (class) AIPS 1: INSEQ 0 Input UV file name (seq. #) AIPS 1: INDISK 0 Input UV file disk unit # AIPS 1: SOURCES *all ' ' Source list AIPS 1: QUAL -1 Source qualifier -1=>all AIPS 1: CALCODE ' ' Calibrator code ' '=>all AIPS 1: SELBAND -1 Bandwidth to select (kHz) AIPS 1: SELFREQ -1 Frequency to select (MHz) AIPS 1: FREQID -1 Freq. ID to select. AIPS 1: UVRANGE 0 0 UV range to be plotted AIPS 1: TIMERANG *all 0 Time range to be plotted AIPS 1: STOKES ' ' Stokes type(s) to select. AIPS 1: BIF 0 Lowest IF number 0=>all AIPS 1: EIF 0 Highest IF number 0=>all AIPS 1: BCHAN 0 Lowest channel number 0=>all AIPS 1: ECHAN 0 Highest channel number 0=>all AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: SUBARRAY 0 Subarray, 0=>1 AIPS 1: ANTENNAS *all 0 Antennas to select AIPS 1: BASELINE *all 0 Baselines with ANTENNAS AIPS 1: DOCALIB 1 > 0 calibrate data & weights AIPS 1: > 99 do NOT calibrate weights AIPS 1: GAINUSE 0 CL (or SN) table to apply AIPS 1: DOPOL -1 If >0 correct polarization. AIPS 1: PDVER 0 PD table to apply (DOPOL>0) AIPS 1: BLVER -1 BL table to apply. AIPS 1: FLAGVER 0 Flag table version AIPS 1: DOBAND -1 If >0 apply bandpass cal. AIPS 1: Method used depends on value AIPS 1: of DOBAND (see HELP file). AIPS 1: BPVER -1 Bandpass table version AIPS 1: SMOOTH *all 0 Smoothing function. SEE AIPS 1: POSSM HELP SPECIAL VALUES AIPS 1: SHIFT 0 0 Position shift: AIPS 1: RA, Dec (arcsec) AIPS 1: 0 => no shift AIPS 1: APARM 1 1 Control information: AIPS 1: 0 0 1: < 0 => scalar average AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: -180 180 >= 0 => vector average AIPS 1: 1 1 2: = 0 => self-scale AIPS 1: 1 0 > 0 => fixed scale AIPS 1: (use APARM(3-6)) AIPS 1: 3: min. amplitude AIPS 1: 4: max. amplitude AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** #>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9745E-01 rms: 5.6632E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 1 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-LA-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 #>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0004E+00 rms: 5.5565E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 2 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-LA-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.8963E-01 rms: 5.9726E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 3 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-LA-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) LA LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0050E+00 rms: 5.0237E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 4 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-LA-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9781E-01 rms: 5.0260E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 5 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-LA-LL-5.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0208E+00 rms: 5.8660E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 6 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-LA-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9538E-01 rms: 5.1647E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 7 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-LA-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 200 POSSM1: POSSUV: for antenna(s) LA POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9833E-01 rms: 5.7105E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 8 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-LA-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 6 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) KP POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0003E+00 rms: 4.8269E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 9 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-KP-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) KP POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0001E+00 rms: 4.8319E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 10 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-KP-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) KP POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0009E+00 rms: 4.8160E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 11 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-KP-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 1 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) KP POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0018E+00 rms: 4.8308E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 12 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-KP-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) KP POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9898E-01 rms: 4.8483E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 13 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-KP-LL-5.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) KP POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9772E-01 rms: 4.8435E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 14 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-KP-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) KP POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0014E+00 rms: 4.8506E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 15 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-KP-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) KP POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) KP POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 6 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 14 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9989E-01 rms: 4.9484E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 16 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-HN-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 15 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9969E-01 rms: 4.9822E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 17 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-HN-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0004E+00 rms: 5.0088E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 18 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-HN-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 1 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0009E+00 rms: 4.9916E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 19 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-HN-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) HN POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) HN POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9847E-01 rms: 4.9798E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 20 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-HN-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0019E+00 rms: 5.0215E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 21 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-HN-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 200 POSSM1: POSSUV: for antenna(s) HN POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9982E-01 rms: 5.0258E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 22 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-HN-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 6 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9964E-01 rms: 4.7359E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 23 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-FD-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9850E-01 rms: 4.7677E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 24 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-FD-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0009E+00 rms: 4.7455E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 25 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-FD-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0014E+00 rms: 4.7153E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 26 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-FD-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9951E-01 rms: 4.7029E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 27 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-FD-LL-5.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9987E-01 rms: 4.7364E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 28 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-FD-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 16 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) FD POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9991E-01 rms: 4.7349E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 29 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-FD-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) FD POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) FD POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 6 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0002E+00 rms: 4.8407E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 30 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-NL-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0002E+00 rms: 4.8608E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 31 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-NL-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 1 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0008E+00 rms: 4.8462E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 32 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-NL-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0012E+00 rms: 4.7868E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 33 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-NL-LL-4.txt LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9938E-01 rms: 4.7539E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 34 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-NL-LL-5.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9847E-01 rms: 4.7904E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 35 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-NL-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0024E+00 rms: 4.7838E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 36 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-NL-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 200 POSSM1: POSSUV: for antenna(s) NL POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9981E-01 rms: 4.7624E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 37 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-NL-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 6 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9980E-01 rms: 4.8868E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 38 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-BR-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9874E-01 rms: 5.1588E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 39 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-BR-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0029E+00 rms: 4.9575E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 40 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-BR-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0014E+00 rms: 4.8044E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 41 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-BR-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) BR LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9586E-01 rms: 4.7899E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 42 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-BR-LL-5.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9971E-01 rms: 4.8468E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 43 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-BR-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0017E+00 rms: 4.8453E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 44 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-BR-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 18 visibilities from total data set of 200 POSSM1: POSSUV: for antenna(s) BR POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9987E-01 rms: 4.8238E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 45 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-BR-LL-8.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 6 >>>>>>>>AIPS 1: 5: min. phase (degrees) AIPS 1: 6: max. phase AIPS 1: 7: x-axis labelling AIPS 1: = 0 = > in channels. AIPS 1: = 1 = > in Hz (or secs AIPS 1: if corr. fn) AIPS 1: = 2 = > in m/s AIPS 1: 8: = 0 => plot cross power AIPS 1: = 1 => plot total power AIPS 1: = 2 => plot BP table AIPS 1: version BPVER AIPS 1: = 3 => plot ACF AIPS 1: = 4 => plot XCF AIPS 1: = 5 => plot BD table AIPS 1: version BPVER AIPS 1: ** press RETURN for more, enter Q or next line to quit print ** AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0000E+00 rms: 4.6915E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 46 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-PT-LL-1.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9894E-01 rms: 4.7405E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 47 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-PT-LL-2.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0016E+00 rms: 4.7740E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 48 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-PT-LL-3.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>>>>>>>AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9884E-01 rms: 4.7530E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 49 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-PT-LL-4.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 560 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0013E+00 rms: 4.7438E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 50 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-PT-LL-5.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 31 >>>>>>>>>>>>>>AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! >POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 9.9959E-01 rms: 4.7488E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 51 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-PT-LL-6.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 35 >>AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: Averaged 17 visibilities from total data set of 720 POSSM1: POSSUV: for antenna(s) PT POSSM1: Will plot 128 channels * 16 IFs polarization LL POSSM1: FILLPL: Real part mean: 1.0001E+00 rms: 4.7514E-01 POSSM1: FILLPL: Imaginary mean: 0.0000E+00 rms: 0.0000E+00 POSSM1: Plot file version 52 created POSSM1: ZTXOP2: using translated file name = POSSM1: ZTXOP2: output//ci712b-PT-LL-7.txt POSSM1: WARNING: VELOCITY EXTENDED FROM IF 1 TO HIGHER IFS POSSM1: GFINIS: number records used 140 POSSM1: Appears to have ended successfully POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 23 >>>>>>>>AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running >>>>>>>POSSM1: Task POSSM (release of 31DEC18) begins POSSM1: UVGET: Using flag table version 1 to edit data POSSM1: POSSUV: Warning, No valid data for IF: 1 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 2 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 3 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 4 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 5 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 6 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 7 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 8 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 9 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 10 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 11 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 12 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 13 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 14 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 15 POSSM1: POSSUV: for antenna(s) PT POSSM1: POSSUV: Warning, No valid data for IF: 16 POSSM1: POSSUV: for antenna(s) PT POSSM1: Purports to die of UNNATURAL causes POSSM1: space 31DEC18 TST: Cpu= 0.0 Real= 0 IO= 6 >>>>>>>>>>>>AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running LOGFILE FOR USER 8888 GETTING LARGE: USE PRTMSG AND CLRMSG NOW! AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: Resumes AIPS 1: POSSM1 was not found to be running AIPS 1: I WON'T DESTROY ON DEFAULT DISK OR TYPE INDISK, INTYPE= 0 AIPS 1: NO DESTROY AIPS 1: Begin check for any 'standard' scratch files AIPS 1: Scratch files -- destroyed: 0 still active: 0 AIPS 1: Destroyed empty user catalog on disk 2 AIPS 1: User 8888: 42938 messages, oldest written 09-JAN-2018 13:56:06 AIPS 1: Deleted 0 messages AIPS 1: Saved POPS environment in area named 'LASTEXIT' AIPS 1: Session command-line history saved. AIPS 1: space 31DEC18 TST: Cpu= 0.1 Real= 8 IO= 9