Welcome to program SCHED.  Version:   6.05  June 2006

The manual is at http://www.aoc.nrao.edu/~cwalker/sched/sched/sched.html
Unix users should set $SCHED to the base area where SCHED is installed.
Most run time messages will be in sched.runlog

Some useful commands to give now if running interactively:
   SCHedule=<filename>    :  Specify input file.
   PLOT                   :  Invokes uv, xy, rd, and uptime plotting.
   FREQLIST=lowF,highF    :  Make frequency list (MHz).  Then exit.
   EXIT                   :  Leave program.
   /                      :  End of inputs - run program (or EXIT).

RDSET:   Reading setup file: pt11900.set
RDSET:   Reading setup file: pt12400.set
RDSET:   Reading setup file: pt12900.set
RDSET:   Reading setup file: pt13400.set
RDSET:   Reading setup file: pt13900.set
RDSET:   Reading setup file: pt14400.set
RDSET:   Reading setup file: pt14900.set
RDSET:   Reading setup file: pt15400.set
STREAD:  Reading station catalog: /home/filehost/cwalker/sched/catalogs/stations.dat
STREAD:  Will read locations file /home/filehost/cwalker/sched/catalogs/locations.dat
SCHIN:   Found   960 input scans.
CHKCODE:  EXPCODE = wjul01u

WRTMSG: Special message from routine CHKCODE:

======================================================================
  WARNING   The project code (EXPCODE) for this observation has a
            non-standard format.  Valid codes start with one or two
            letters followed by 3 digits.  Any leading zeros should
            be included.  A couple of valid examples are bt068
            and v003.

            Note that some SCHED examples use non-valid codes, as do
            VLBA test observations.
======================================================================


SRREAD:  Reading source catalog: /home/filehost/cwalker/sched/catalogs/sources.pointing
GETFREQ: Reading frequency file: /users/cwalker/sched/catalogs/freq.dat
SETCHAN: Must use dual sidebands because of the maximum BBCs available at some site:   8
SETCHAN: Must use dual sidebands because of the maximum BBCs available at some site:   8
SETCHAN: Must use dual sidebands because of the maximum BBCs available at some site:   8
SETCHAN: Must use dual sidebands because of the maximum BBCs available at some site:   8
SETCHAN: Must use dual sidebands because of the maximum BBCs available at some site:   8
SETCHAN: Must use dual sidebands because of the maximum BBCs available at some site:   8
SETCHAN: Must use dual sidebands because of the maximum BBCs available at some site:   8
SETCHAN: Must use dual sidebands because of the maximum BBCs available at some site:   8
SCHOPT:  First output scan will be number     1
SCHOPT:  There will be   104 output scans (    1 -   104) from 182/20:00:00 to 182/23:52:53
SUMOPE:  Writing summary file wjul01u.sum
OMSOUT:  Writing OMS file wjul01u.oms
FLAGS:   Writing apriori flagging file wjul01u.flag
 Processing VLBA_MK