! ================================================================ ! Preferred Dynamic Contraints. Alter [defaults] as desired. ! ================================================================ ! Equipment constraints: ! Stations. Below each station code, the "o" indicates an ! [optional] station that is to be used if it is available. ! Change "o" to "r" if the station is required or change ! "o" to "n" if the station is not to be used. ! SC HN NL FD LA PT KP OV BR MK ! o o o o o o o o o o ! Minimum number of stations [9 (6 for 3mm)]: 8 ! May we swap PT for a single VLA antenna? [yes] NO (cycle time = 60 sec) ! Consult http://www.aoc.nrao.edu/~gtaylor/y1gotcha.html ! to decide. If you adopt the default, then both PT and ! VLA1 must be in the stations list in the keyin file. ! Bands and polarizations. Below each band code, insert "R" ! if the righthand polarization is to be used, "L" if the ! lefthand polarization is to be used, "d" if dual ! polarizations are to be used, or "o" if the band is in ! your setups but scheduling should not be constrained by ! its availability. ! 90cm 50cm 20cm 13cm 6cm 4cm 2cm 1cm 7mm 3mm ! d ! Weather constraints: none ! [appropriate for bands marked "L", "R", or "d" above ! and for at least the minimum number of stations] ! Date constraints: ! Preferred date(s), usually a series start [none]: ! Excluded dates plus reason [none]: ! Preferred interval between segments in days [none]: ! This observation consist of four (4) different epochs, ! with a costant time separation between consecutive epochs ! of 90 days (3 months). ! Special conditions (e.g., a series with different ! spacings in time) [none]: !NOTE: measuring proper motions of water masers is our primary aim: ! it is ESSENTIAL to observe with a costant time separation between ! the consecutive epochs of about 1 month ! ================================================================ ! ========================================================= ! ! SCHED command file for VLBA Experiment BG140 ! ! ========================================================= ! ! Cover information: EXPT = 'Gas kinematics around high-mass YSOs explored via maser associations' EXPCODE = 'BM244K' VERSION = 1 PINAME = 'Luca Moscadelli' ADDRESS1 = 'INAF-Osservatorio Astronomico di Cagliari' ADDRESS2 = 'Loc. Poggio dei Pini, strada 54' ADDRESS3 = '09012 - Capoterra (CA)' ADDRESS4 = 'Italy' PHONE = '+39 0706754914' FAX = '+39 070 510171' EMAIL = 'mosca@ca.astro.it' OBSMODE = '1.3cm VLBA setup' OBSTYPE = 'VLBA' CORREL = 'Socorro' note1 = 'This observation consists of four (4) different epochs, spaced' note2 = 'by 90 days. USE THIS "KEY_IN" FILE FOR EACH EPOCH.' note3 = 'This is a PHASE REF experiment, DO NOT INTERRUPT SCAN SEQUENCE' note4 = 'SPECTRAL LINE observations: Make sure *** PHASE CAL is OFF***' ! Correlator information CORREL = 'Socorro' CORAVG = 1.0 CORCHAN = 1024 CORNANT = 10 CORPOL = 'off' CORWTFN = 'uniform' CORSRCS = 'SCHEDULE' CORTAPE = DAT CORSHIP1 = 'Luca Moscadelli' CORSHIP2 = 'Osservatorio Astronomico di Cagliari' CORSHIP3 = 'Loc. Poggio dei Pini, strada 54, 09012 Capoterra, ITALY' ! Additional tape commands ! ! tapeini / ! ! tplength = 17600,17600,17600,17600,17600,17600,17600,17600,17600,17600 ! ! tpsta = 'vlba_pt', 'vlba_la', 'vlba_kp', 'vlba_nl', 'vlba_fd', ! 'vlba_ov', 'vlba_br', 'vlba_hn', 'vlba_sc', 'vlba_mk', ! 'eb_vlba', 'jodrell2', 'onsala85', 'medicina', 'noto', ! 'metsahov', 'shanghai' / ! ! Automatic tape allocation autotape = 2 ! ! Allow SCHED to overwrite existing files overwrit ! Source catalogue included srccat / source='G23.01' ra=18:34:40.39 dec=-9:0:38.5 EQUINOX = J2000 vel = +77.0 REMARKS='PROGRAM SOURCE' / endcat / ! srcfile = '$SCHED/catalogs/sources.vlba' ! Stations Catalog stafile = '$SCHED/catalogs/stations.dat' ! Spectral line rest frequency LINEINIT / lineset = 'H2O' restfreq=22235.07985 / ENDLINES / ! Observing set-up freqfile = '$SCHED/catalogs/freq.dat' setinit = bm244b.set / !non si tratta di un file di input o output, ma serve !solo ad individuare le seguenti istruzioni di setup nchan = 2 bits = 2 bbfilter = 16.0 freqref = 22228.99 freqoff = -0.50, -0.50 netside = U, U pol = dual samprate = 32 pcal = 'off' format = 'vlba' station = 'vlba_pt', 'vlba_la', 'vlba_kp', 'vlba_nl', 'vlba_fd', 'vlba_ov', 'vlba_br', 'vlba_hn', 'vlba_sc', 'vlba_mk'/ ! station = 'eflsberg', 'jodrell2', 'onsala85', 'medicina', 'torun' / ! I include the next line as indicated by sched; to have the default ! 16 tracks causes an error ! barrel=roll_8 / endset/ ! ! ! items to plot in the ".sum" files !sumitem = el1, slew sumitem = el1, el2, dwell, slew ! Initial Scan information ! times are in LST for Pie Town !6.0 hrs dynamically scheduled centered at LST 5.5 LST = 'VLBA_PT' !optmode = uptime !opdur = 24:00:00 ! month = 3 day = 1 year = 2006 day = 60837 start = 15:30:00 ! ! automatic tape allocation autotape=2 ! LINENAME = 'H2O' DOPPLER SETUP = 'bm244b.set' !nosetup BW = 16.0 ! ! ! START OF SCHEDULE PROPER station = 'vlba_pt', 'vlba_la', 'vlba_kp', 'vlba_nl', 'vlba_fd', 'vlba_ov', 'vlba_br', 'vlba_hn', 'vlba_sc', 'vlba_mk' ! station = 'eflsberg', 'jodrell2', 'onsala85', 'medicina','torun' source = 'J1800+3848' dwell = 05:00 DOPSRC 'G23.01' / source = 'J1825-0737' gap = 0 dwell = 00:35 DOPSRC 'G23.01' / group 2 rep 60 source = 'G23.01' gap = 0 dur = 00:35 DOPSRC 'G23.01' / source = 'J1825-0737' gap = 0 dur = 00:35 DOPSRC 'G23.01' / ! source = 'J1642+3948' gap = 2:00 dwell = 08:00 DOPSRC 'G23.01' / source = 'J1825-0737' gap = 0 dwell = 00:35 DOPSRC 'G23.01' / group 2 rep 50 source = 'G23.01' gap = 0 dur = 00:35 DOPSRC 'G23.01' / source = 'J1825-0737' gap = 0 dur = 00:35 DOPSRC 'G23.01' / ! source = 'J1751+0939' gap = 2:00 dur = 05:00 DOPSRC 'G23.01' / source = 'J1825-0737' gap = 0 dwell = 00:35 DOPSRC 'G23.01' / group 2 rep 50 source = 'G23.01' gap = 0 dur = 00:35 DOPSRC 'G23.01' / source = 'J1825-0737' gap = 0 dur = 00:35 DOPSRC 'G23.01' / ! source = 'J1642+3948' gap = 2:00 dwell = 08:00 DOPSRC 'G23.01' / source = 'J1825-0737' gap = 0 dwell = 00:35 DOPSRC 'G23.01' / group 2 rep 50 source = 'G23.01' gap = 0 dur = 00:35 DOPSRC 'G23.01' / source = 'J1825-0737' gap = 0 dur = 00:35 DOPSRC 'G23.01' / ! source = 'J2101+0341' gap = 2:00 dur = 05:00 DOPSRC 'G23.01' / source = 'J1825-0737' gap = 0 dwell = 00:35 DOPSRC 'G23.01' / group 2 rep 50 source = 'G23.01' gap = 0 dur = 00:35 DOPSRC 'G23.01' / source = 'J1825-0737' gap = 0 dur = 00:35 DOPSRC 'G23.01' / ! source = 'J2101+0341' gap = 2:00 dur = 05:00 DOPSRC 'G23.01' /