! ================================================================
!   Preferred Dynamic Contraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           o   o   o   o   o   o   o   o   o   o
!       Minimum number of stations [9 (6 for 3mm)]: 7
!       May we swap PT for a single VLA antenna? [yes] no
!          Consult http://www.aoc.nrao.edu/~gtaylor/y1gotcha.html
!          to decide.  If you adopt the default, then both PT and
!          VLA1 must be in the stations list in the keyin file.
!    Bands and polarizations.  Below each band code, insert "R" 
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual 
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!           90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!                                                        d
! Weather constraints: 
! Date constraints:
!    Preferred date(s), usually a series start [none]: 
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days [none]:
!    Special conditions (e.g., a series with different
!       spacings in time) [none]: 
! ================================================================
VERSION  = 1
EXPT     = 'VLBA format SiO in V838 Mon'
EXPCODE  = 'bc157c'
OBSTYPE  = 'VLBA'
SRCFILE  = 'NONE'  
PINAME   = 'M. Claussen'
ADDRESS1 = 'NRAO-AOC'
ADDRESS2 = 'P.O. Box O'
ADDRESS3 = 'Socorro, NM 87801'
PHONE    = '505-835-7284'
OBSPHONE = '505-835-4071'
FAX      = '505-835-7027'
EMAIL    = 'mclausse@nrao.edu'
NOTE1    = 'Use all available antennas.'
!
!
! =================================================================
! ====================  Correlator Information  ===================
! =================================================================
!
correl = 'Socorro'
coravg = 1.048
corchan = 512
cornant = 10
corpol = 'off'
corship1 = 'M. Claussen'
corship2 = 'NRAO-AOC'
cortape 'DAT'
corwtfn = 'uniform'
corsrcs = 'use sched positions for correlation of targets'
cornote1 = 'Two correlator passes, please.  BBCs 1&2 for pass 1'
cornote2 = 'BBCs 3&4 for pass 2'
! cornote3 = 
!
! end correlator parameters
!
overwrit
sumitem = el1, el2, tape1, tape2, early, dwell  
!
srccat /
!  SiO maser source. 
!
SOURCE ='V838Mon' ra = 07:04:04.8219 dec = -03:50:50.651
         Equinox = 'J2000' VEL= 54.3, 54.3, 54.3, 54.3 /

endcat /
!
!
!
stafile  = '$SCHED/catalogs/stations.dat'
srcfile  = '$SCHED/catalogs/sources.vlba'
!
! Spectral lines
!
lineinit /
lineset ='SiO'  restfreq=43122.079, 43122.079, 42820.582, 42820.582 /
endlines /
! 
setinit = bc156.set /
!
!   Setup for VLBA 
!   SiO v=1, v=2, j=1->0
!   8 MHz bandwidth, 0.7cm wavelength, dual polz
!
!
nchan = 4  samprate = 16.0  bits = 2  bbfilter = 8.0   ! 128 Mbps
! tpmode = 2  format = 'VLBA1:4'
firstlo  = 42200.00  fe(1) = '7mm'   fe(3) = '7mm'
freqref  =  42820.58
freqoff  =  301.5,  301.5, 0.0, 0.0
bbc      =       1, 2, 3, 4
netside  =       U, U, U, U
ifchan   =       R, L, R, L
pol      = 'dual'
pcal     = 'off'
station  = 'VLBA'
rchan = A  lchan = C   /
endset /
!
!
! **********************************************************
! *** To facilitate scheduling, this file could start   ****
! *** an hour earlier or later than listed.  Could also ****
! *** be stopped an hour early at the end. mjc 10/07/05 ****
! **********************************************************
!
year   = 2006
!month  = 06
day    = 60824
start  = 03:01:00
lst = 'vlba_pt'
!
obstype='vlba'
!
STATIONS = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA,
           VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK
!
!                                                                   
!
!
!
DOPPLER
SETUP = 'bc156.set'
LINENAME='SiO'
BW = 8.0, 8.0, 8.0, 8.0
!
SOURCE = '3C84' GAP = 00:00:00 dwell = 00:03:30 DOPSRC 'V838Mon' /
! 
SOURCE = 'J0656-0323' GAP = 00:00:00 dwell = 90 /
source = 'J0703-0051' dwell = 90 /
source = 'J0730-0241' dwell = 90 /
source = 'J0739+0137' dwell = 90 /
source = 'J0650-1637' dwell = 90 /
source = 'J0811+0146' dwell = 90 /
source = 'J0750+1231' dwell = 90 /
source = 'J0728+2153' dwell = 90 /
!
group=2
repeat=26 
SOURCE = 'J0656-0323'dwell = 30 /
SOURCE = 'V838Mon'   dwell = 90 /
!
SOURCE = 'J0656-0323' GAP = 00:00:00 dwell = 90 /
source = 'J0703-0051' dwell = 90 /
source = 'J0730-0241' dwell = 90 /
source = 'J0739+0137' dwell = 90 /
source = 'J0650-1637' dwell = 90 /
source = 'J0811+0146' dwell = 90 /
source = 'J0750+1231' dwell = 90 /
source = 'J0728+2153' dwell = 90 /
!
group=2
repeat=26 
SOURCE = 'J0656-0323'dwell = 30 /
SOURCE = 'V838Mon'   dwell = 90 /
!
SOURCE = 'J0656-0323' GAP = 00:00:00 dwell = 90 /
source = 'J0703-0051' dwell = 90 /
source = 'J0730-0241' dwell = 90 /
source = 'J0739+0137' dwell = 90 /
source = 'J0650-1637' dwell = 90 /
source = 'J0811+0146' dwell = 90 /
source = 'J0750+1231' dwell = 90 /
source = 'J0728+2153' dwell = 90 /
!
group=2
repeat=26 
SOURCE = 'J0656-0323'dwell = 30 /
SOURCE = 'V838Mon'   dwell = 90 /
!
SOURCE = 'J0656-0323' GAP = 00:00:00 dwell = 90 /
source = 'J0703-0051' dwell = 90 /
source = 'J0730-0241' dwell = 90 /
source = 'J0739+0137' dwell = 90 /
source = 'J0650-1637' dwell = 90 /
source = 'J0811+0146' dwell = 90 /
source = 'J0750+1231' dwell = 90 /
source = 'J0728+2153' dwell = 90 /
!
group=2
repeat=26 
SOURCE = 'J0656-0323'dwell = 30 /
SOURCE = 'V838Mon'   dwell = 90 /
!
SOURCE = 'J0656-0323' GAP = 00:00:00 dwell = 90 /
source = 'J0703-0051' dwell = 90 /
source = 'J0730-0241' dwell = 90 /
source = 'J0739+0137' dwell = 90 /
source = 'J0650-1637' dwell = 90 /
source = 'J0811+0146' dwell = 90 /
source = 'J0750+1231' dwell = 90 /
source = 'J0728+2153' dwell = 90 /
!
SOURCE = '3C84' GAP = 00:02:00 dwell = 00:03:30 DOPSRC 'V838Mon' /
!
group=2
repeat=26 
SOURCE = 'J0656-0323'gap = 00:00:00 dwell = 30 /
SOURCE = 'V838Mon'   dwell = 90 /
!
SOURCE = 'J0656-0323' dwell = 90 /
source = 'J0703-0051' dwell = 90 /
source = 'J0730-0241' dwell = 90 /
source = 'J0739+0137' dwell = 90 /
source = 'J0650-1637' dwell = 90 /
source = 'J0811+0146' dwell = 90 /
source = 'J0750+1231' dwell = 90 /
source = 'J0728+2153' dwell = 90 /
!
group=2
repeat=26 
SOURCE = 'J0656-0323'dwell = 30 /
SOURCE = 'V838Mon'   dwell = 90 /
!
!
SOURCE = '3C84' GAP = 00:02:00 dwell = 00:03:30 DOPSRC 'V838Mon' /
!