! project BV057
!
! VLBA obs. at L, C and X bands of the BAL quasar
!
! ================================================================
!   Preferred Dynamic Contraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           o   o   o   o   o   o   o   o   o   o
!       Minimum number of stations [9 (6 for 3mm)]:
!       May we swap PT for a single VLA antenna? [no]
!          Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html
!          to decide.  If you adopt the default, then both PT and
!          VLA1 must be in the stations list in the keyin file.
!    Bands and polarizations.  Below each band code, insert "R"
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!           90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!                         d          d    d
! Weather constraints:
!    [appropriate for bands marked "L", "R", or "d" above
!     and for at least the minimum number of stations]
! Date constraints:
!    Preferred date(s), usually a series start [none]:
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days [none]:
!    Special conditions (e.g., a series with different
!       spacings in time) [none]:
! ================================================================
!
overwrit
autotape  = 2
!
!================ cover information ================
!
 VERSION  = 1
 expt      = 'First pc-scale imaging of a BAL quasar'
 obstype   = 'VLBA'
 expcode   = BV057
 PINAME   = 'Vigotti Mario'
 ADDRESS1 = 'Istituto di Radioastronomia -- CNR'
 ADDRESS2 = 'Via Gobetti n. 101'
 ADDRESS3 = 'I-40129 Bologna '
 ADDRESS4 = 'ITALY'
 PHONE    = '+39 051 6399378'
 FAX      = '+31 051 6399431'
 EMAIL    = 'vigotti@ira.cnr.it'
 CORREL   = 'Socorro'
 Note1    = 'Non standard frequecies used'
!
!=============== Correlator Information ============
!
correl    = 'Socorro'
coravg    = 4
corchan   = 16
cornant   = 10
corpol    = 'on'
corwtfn   = 'uniform'
corsrcs   = 'SCHEDULE'
cortape   = DAT
corship1  = 'Daniele Dallacasa'
corship2  = 'Istituto di Radioastronomia - CNR'
corship3  = 'I-40129 Bologna, ITALY'
!
!=============== Seutp Information ==================
!
!------------------------------------------------------------------------------------
!
setini = v18cm_nst.set /
!
! custom setup for deep 21 cm observations made by G. Taylor on 
! 6/18/1999, and subsequently adapted by D. Dallacasa 10.Oct.2004
!
!     Format      Tape length  Density  Tape speed  Time/pass
! VLBA/MkIII/MkIV    17600      High     160.00        22:00
!     256 Mbps 
!
  nchan    = 8
  bits     = 2
  bbfilter = 8.0
fe(1) = '20cm'
fe(3) = '20cm'
synth(2) = 2.4
firstlo = 2400
  freqref  =   1414.9
  freqoff  =  -11.50, -11.50, -3.50, -3.50, 216.50, 216.50, 224.50, 224.50
  netside  =  U, U, U, U, U, U, U, U
  pol      = dual
station  = VLBA
/
endset  /
!
!------------------------------------------------------------------------------------
!
setini = v6cm_nst.set /
! NON STANDARD setup ! based on... v6cm-256-8-2.set
!
!     Format      Tape length  Density  Tape speed  Time/pass
! VLBA/MkIII/MkIV    17600      High     160.00        22:00
!      256 Mbps 
!  modified on 10.Oct.2004
  nchan    = 8
  bits     = 2
  bbfilter = 8.0
  freqref  =   4990.99
  freqoff  =  -390.00, -390.00, -280.00, -280.00 , -145.00, -145.00, 0.0, 0.0
  netside  =  U, U, U, U, U, U, U, U
  pol      = dual
  station  = VLBA
  /
endset  /
!
!------------------------------------------------------------------------------------
!
setini = v4cm_nst.set /
!
! NON STANDARD setup ! based on... v4cm-256-8-2.set
!
!     Format      Tape length  Density  Tape speed  Time/pass
! VLBA/MkIII/MkIV    17600      High     160.00        22:00
!      256 Mbps 
!  modified on 10.Oct.2004
  nchan    = 8
  bits     = 2
  bbfilter = 8.0
  freqref  =   8114.99
  freqoff  =  -4.00, -4.00, 4.00, 4.00, 374.00, 374.00, 382.00, 382.00
  netside  =  U, U, U, U, U, U, U, U
  pol      = dual
  station  = VLBA
  /
endset  /
!
!------------------------------------------------------------------------------------
!
stafile   = '$SCHED/catalogs/stations.dat'
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
!
!
!
srccat /
!!! Calibrators & Fringe Finders
!
!Fringe finder & EVPA calib
source='3C279'      ra=12:56:11.1666 dec=-05:47:21.525 equinox='J2000' calcode=' ' /
source='J2136+0041' ra=21:36:38.5863 dec=+00:41:54.213 equinox='J2000' calcode=' ' /
!D-term calib  
source='J1357+7643' ra=13:57:55.3715 dec=+76:43:21.051 equinox='J2000' calcode=' ' /
!reference:
source='mkn501'     ra=16:53:52.2167 dec=+39:45:36.609 equinox='J2000' calcode=' ' /
!and, finally, target:
source='J1624+3758' ra=16:24:53.481  dec=+37:58:06.66  equinox='J2000' calcode=' ' /
endcat/
!
!========================Start observing commands
!
LST=VLBA_PT
start = 12:00:00 
DAY=60100 ! CHANGE THIS PLEASE
!
gap=00:00
minpause=0
prescan=0
!
setup     = v18cm_nst.set
source='J1624+3758'  dur  =03:00 /
source='mkn501'      dur  =01:20 /
setup     = v4cm_nst.set
source='J1624+3758'  dur  =03:00 /
source='mkn501'      dur  =01:20 /
setup     = v6cm_nst.set
source='J1624+3758'  dur  =03:00 /
source='mkn501'      dur  =01:30 /
setup     = v4cm_nst.set
source='J1624+3758'  dur  =03:00 /
source='mkn501'      dur  =01:20 /
setup     = v18cm_nst.set
source='J1624+3758'  dur  =03:00 /
source='mkn501'      dur  =01:30 /
gap=02:00
!1st
setup     = v18cm_nst.set
source='J1357+7643'  dur  =03:20 /
gap=00:00
setup     = v6cm_nst.set
source='J1357+7643'  dur  =02:30 /
setup     = v4cm_nst.set
source='J1357+7643'  dur  =02:30 /
source='J1624+3758'  dur  =04:20 /
source='mkn501'      dur  =01:20 /
setup     = v6cm_nst.set
source='J1624+3758'  dur  =02:40 /
source='mkn501'      dur  =01:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:40 /
!2nd
setup     = v18cm_nst.set
source='3C279'       dwell=04:00 / !fringe finder & EVPA cal
setup     = v6cm_nst.set
source='3C279'       dur  =03:30 / !fringe finder & EVPA cal
setup     = v4cm_nst.set
source='3C279'       dur  =03:30 / !fringe finder & EVPA cal
source='J1624+3758'  dur  =05:40 /
source='mkn501'      dur  =01:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:40 /
! pass 3
group 12 rep 2 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v18cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
!
gap=02:00
setup     = v18cm_nst.set
source='J1357+7643'  dur  =03:20 /
gap=00:00
setup     = v6cm_nst.set
source='J1357+7643'  dur  =02:30 /
setup     = v4cm_nst.set
source='J1357+7643'  dur  =02:30 /
source='J1624+3758'  dur  =04:20 /
source='mkn501'      dur  =01:20 /
setup     = v6cm_nst.set
source='J1624+3758'  dur  =02:40 /
source='mkn501'      dur  =01:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:40 /
group 12 rep 2 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v18cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
!
!!!
!
setup     = v18cm_nst.set
source='3C279'       dwell=04:00 / !fringe finder & EVPA cal
setup     = v6cm_nst.set
source='3C279'       dur  =03:30 / !fringe finder & EVPA cal
setup     = v4cm_nst.set
source='3C279'       dur  =03:30 / !fringe finder & EVPA cal
source='J1624+3758'  dur  =05:40 /
source='mkn501'      dur  =01:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:40 /
!
group 12 rep 3 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v18cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
!
gap=02:00
setup     = v18cm_nst.set
source='J1357+7643'  dur  =03:20 /
gap=00:00
setup     = v6cm_nst.set
source='J1357+7643'  dur  =02:30 /
setup     = v4cm_nst.set
source='J1357+7643'  dur  =02:30 /
source='J1624+3758'  dur  =04:20 /
source='mkn501'      dur  =01:20 /
setup     = v6cm_nst.set
source='J1624+3758'  dur  =02:40 /
source='mkn501'      dur  =01:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:40 /
!
group 12 rep 2 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v18cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
!
gap=02:00
setup     = v18cm_nst.set
source='J1357+7643'  dur  =03:20 /
gap=00:00
setup     = v6cm_nst.set
source='J1357+7643'  dur  =02:30 /
setup     = v4cm_nst.set
source='J1357+7643'  dur  =02:30 /
source='J1624+3758'  dur  =04:20 /
source='mkn501'      dur  =01:20 /
setup     = v6cm_nst.set
source='J1624+3758'  dur  =02:40 /
source='mkn501'      dur  =01:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:40 /
!
group 12 rep 2 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v18cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
!
gap=02:00
setup     = v18cm_nst.set
source='J1357+7643'  dur  =03:20 /
gap=00:00
setup     = v6cm_nst.set
source='J1357+7643'  dur  =02:30 /
setup     = v4cm_nst.set
source='J1357+7643'  dur  =02:30 /
source='J1624+3758'  dur  =04:20 /
source='mkn501'      dur  =01:20 /
setup     = v6cm_nst.set
source='J1624+3758'  dur  =02:40 /
source='mkn501'      dur  =01:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:40 /
!
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v18cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
!
setup     = v6cm_nst.set
source'J2136+0041'   dur  =05:00 /
setup     = v18cm_nst.set
source'J2136+0041'   dur  =02:00 /
setup     = v4cm_nst.set
source'J2136+0041'   dur  =02:00 /
setup     = v4cm_nst.set
source='J1624+3758'  dur  =04:00 /
source='mkn501'      dur  =01:20 /
setup     = v18cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:40 /
!
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v18cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v4cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
!
!group 9 rep 2 /
setup     = v6cm_nst.set
source'J2136+0041'   dur  =05:00 /
setup     = v18cm_nst.set
source'J2136+0041'   dur  =02:00 /
setup     = v4cm_nst.set
source'J2136+0041'   dur  =02:00 /
setup     = v4cm_nst.set
source='J1624+3758'  dur  =04:00 /
source='mkn501'      dur  =01:20 /
setup     = v18cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:20 /
setup     = v6cm_nst.set
source='mkn501'      dur  =01:20 /
source='J1624+3758'  dur  =02:40 /
!
! End of BV057
!