! Sent to vlbiobs@nrao.edu on 25th Oct 2004
! ================================================================
!   Preferred Dynamic Contraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints: 
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!        SC  HN  NL  FD  LA  PT  KP  OV  BR  MK GBT vla Eff 
!         r  r   r   r   r   r   r   r   r   r   r   r   r
!       Minimum number of stations [9 (6 for 3mm)]: 13
!       May we swap PT for a single VLA antenna? [yes] no
!    Bands and polarizations.  Below each band code, insert "R" 
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual 
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!        90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!                                                    dual
!    Remarks: GBT available at 43GHz
!
! Weather constraints: good weather conditions
!    [appropriate for bands marked "L", "R", or "d" above
!     and for at least the minimum number of stations]
! Date constraints: 
!    Preferred date(s), usually a series start [none]: none
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days [none]:
!    Special conditions (e.g., a series with different
!       spacings in time) [none]:
! ================================================================
!
! ==========================================================
! =================  Cover Information  ====================
! ==========================================================
!
version  = 1    
expt     = 'High dynamic range map of SiO maser emission in IRC+10011'
expcode  = 'BD103'
piname   = 'Desmurs, J.-F.'
address1 = 'Observatorio Astronomico Nacional'
phone    = '34 1 527 01 07'
obsphone = '34 1 527 01 07'
fax      = '34 1 527 19 35'
email    = 'desmurs@oan.es'
obsmode  = 'VLBA 7mm-64-4-2: 7mm : 2 Pol & 2 spectral lines, 4MHz.'
obstype  = 'VLBA'
note1    = 'This is a line experiment at 7mm using the HSA'
note2    = 'Delayed until early in trimester 2005-T1 for GBT'
note3    = 'to be equiped with a 43GHz receiver'
note4    = '** SWITCH PHAS CAL OFF ** please, thank you'

! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================
! 
correl   = 'Socorro'
coravg   = 1
corchan  = 128
cornant  = 13
corpol   = 'off'
corwtfn  = 'uniform'
corsrcs  = 'Line Sources from schedule'
cortape  = 'DAT'
corship1 = 'J.-F. Desmurs'
corship2 = 'Observatorio Astronomico Nacional'
corship3 = 'C/ Alfonso XII, 3.
corship4 = '28014 Madrid - Spain'
cornote1    = ''
!
! ==========================================================
! ==================  Program control  =====================
! ==========================================================
!
!    Normally SCHED will not overwrite preexisting files.  If
!    you do not want this protection, uncomment the following line:
overwrit
!
!
!    To only process VLBA and VLA stations, uncomment the following line:
! dosta 'vl'
!
! ==========================================================
! =================== Tape initialization  =================
! ==========================================================
autotape = 2
sumitem = el1, el2, tape1, tape2, early, dwell
!
! ==========================================================
! ==============  Spectral line rest frequecies  ===========
! ==========================================================
!
lineinit /
!
! 7mm 28SiO v=1, j=1-0, 28SiO v=2, j=1-0
! 
  lineset = 'SiO43'   
     restfreq= 42820.587, 42879.916, 43122.080, 43122.080 /
!
endlines /

!
! ==========================================================
! ==================  Observing Setup   ====================
! ==========================================================
!
setinit = sio_43.set /
! Based: Standard setup file: v7mm-64-4-2.set                         
! 
!     Format      Tape length  Density  Tape speed  Time/pass
! VLBA/MkIII/MkIV    17600      High      80.0         44:00
!    MkIII/MkIV       8800      Low      135.0         13.02
!
  nchan    = 4
  bits     = 2
  bbfilter = 8.0        ! At 43GHz -> 55 km/s
  samprate = 16.0
  format = VLBA1:2
!!!!!!!!!!!!!!!!!!!!!!!!!!
  pcal = 'off'
!!!!!!!!!!!!!!!!!!!!!!!!!!
!
! Rest Freq v2=42820.587, v1=43122.080 MHz
!!
  freqref  =  42970.99 ! Freq. center between the two SiO line.
  freqoff  =  -150.0, -150.0, +150.0, +150.0
  netside  =  U, U, U, U
  bbc      =  1,   2,   3,   4
  pol      = dual
  format   = 'VLBA'
  station  = VLBA, EB_VLBA, GBT_VLBA /

station  = 'VLA27'
  ifchan  = A, C, B, D
!! Craig W. advise :
  firstlo = 42210.1 , 42210.1 , 42510.1, 42510.1
  vlaband = VQ    vlafeab = 51.6  vlasyna = 3610.1  flukea = 100.0
  vlabw = '0000'  vlafecd = 13.4  vlasynb = 3910.1  flukeb = 200.0
  fefilter = '0000' /

endset  /
!
! ==========================================================
! ====================  Source Catalog  ====================
! ==========================================================
!
srccat /

! Program sources:
EPOCH='J2000'
SOURCE='IRC10011' RA=01:06:25.9938 DEC=+12:35:53.287 VEL = 8.5 /

! Quasars:

SOURCE='J0237+28','0234+285'
      RA=02:37:52.4056778 DEC=+28:48:08.990080 CALCODE='N' 
      REMARKS='ICRF - Ext.1 Source - 1998 IERS Annual Report' /
SOURCE='3C454.3' 
      RA=22:53:57.7483000 DEC=+16:08:53.563000 
      CALCODE='M' /
endcat /

! 
! ==========================================================
! ====================  Station Catalog  ===================
! ==========================================================
!
stafile  = '$SCHED/catalogs/stations.dat'
!
! ==========================================================
! ==================== End header info. ==================== 
! ==========================================================
!
!
! ==========================================================
! =================  Initial Scan Information  =============
! ==========================================================
!
STATIONS = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, 
           VLBA_OV, VLBA_BR, VLA27, GBT_VLBA, EB_VLBA
!
! Mauna Kea will be include later (~3h later)
! ARECIBO did not have 43GHz
!
vlamode 'va'
!
LST     = 'VLBA_PT' ! Schedule in PT LST.
!
!YEAR   = 2005
!MONTH  = 01
DAY    = 60089
START  = 20:00:00   !  UT 6hours
PCAL = OFF
!
SETUP  = 'sio_43.set'
linename = 'SiO43' doppler 
!
!
! ==========================================================
! ========================  The Scans  =====================
! ==========================================================
!
!     Note that first "GAP" after START is ignored.
!
! Tape speeds: Low density - 133.330 ips,  High density -  80.00 ips
! Time per pass for  17600 ft, High density tapes is: 00:44:00

group 2 repeat 3 
 source='3C454.3'  dwell=00:05:00 gap=00:00 dopsrc='IRC10011' /
 source='IRC10011' dwell=00:17:00 gap=00:00 dopsrc='IRC10011' /
!
group 2 repeat 4
 source='J0237+28' dwell=00:05:00 gap=00:00 dopsrc='IRC10011' /
 source='IRC10011' dwell=00:17:00 gap=00:00 dopsrc='IRC10011' /
!

!Adding Mauna Kea Antenna
STATIONS = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, 
           VLBA_OV, VLBA_BR, VLBA_MK, VLA27, GBT_VLBA, EB_VLBA

source='J0237+28' dwell=00:05:00 gap=00:00 dopsrc='IRC10011' /

!Withdrawing Effelsberg Antenna
STATIONS = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, 
           VLBA_OV, VLBA_BR, VLBA_MK, VLA27, GBT_VLBA

source='IRC10011' dwell=00:17:00 gap=00:00 dopsrc='IRC10011' /

group 2 repeat 5
 source='J0237+28' dwell=00:05:00 gap=00:00 dopsrc='IRC10011' /
 source='IRC10011' dwell=00:17:00 gap=00:00 dopsrc='IRC10011' /
!
source='IRC10011'  dwell=00:10:00 gap=00:00 dopsrc='IRC10011' /
source='J0237+28'  dwell=00:05:00 gap=00:00 dopsrc='IRC10011' /

exit /


!!END 
!! 
!!  plot schedule = bd103.key /
!!