! ================================================================
!   Preferred Dynamic Contraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicate
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           o   o   o   o   o   o   o   o   o   o
!       Minimum number of stations : 6
!       May we swap PT for a single VLA antenna? [no]
!          Consult http://www.aoc.nrao.edu/~gtaylor/y1gotcha.html
!          to decide.  If you adopt the default, then both PT and
!          VLA1 must be in the stations list in the keyin file.
!    Bands and polarizations.  Below each band code, insert "R"
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!           90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!                               d    d    d    d    d    d    o
! Weather constraints:
!    [appropriate for bands marked "L", "R", or "d" above
!     and for at least the minimum number of stations]
! Date constraints:
!    Preferred date(s), usually a series start: start in November 2003
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days: 30
!    Special conditions (e.g., a series with different
!      spacings in time) :
!
! ================================================================
! ==========================================================
! =================  Cover Information  ====================
! ==========================================================

version  = 1
expt     = 'VLBA/XMM-Newton/WEBT monitoring of blazar AO 0235+16'
expcode  = BW069A
obstype  = VLBA

piname   = 'Kaj Wiik / VSOP Group'
address1 = 'Institute of Space and Astronautical Science'
address2 = '3-1-1 Yoshinodai, Sagamihara'
address3 = 'Kanagawa 229-8510'
address4 = 'JAPAN'
phone    = '+81-42-759-8346'
obsphone = '+81-42-759-8346'
email    = 'kaj.wiik@iki.fi'
fax      = '+81-422-759-8485'
obsmode  = 'Continuum'
correl   = 'Socorro'
note1    = ' '

! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================

correl   = 'Socorro'
coravg   = 2
corchan  = 16
cornant  = 10
corpol   = 'on'
corwtfn  = 'uniform'
corsrcs  = 'STANDARD'
cortape  = 'DAT'
corship1 = 'Kaj Wiik, ISAS / VSOP Group'
corship2 = '3-1-1 Yoshinodai, Sagamihara'
corship3 = 'Kanagawa 229-8510, JAPAN'
cornote1 = ' '

! ==========================================================
! ==================  Source  Catalog  =====================
! ==========================================================


srcfile = $SCHED/catalogs/sources.vlba


srccat /

source='P-IkTau','SiO-IkTau','IkTau' CALCODE = 'L'
RA=03:53:28.71   DEC=11:24:22.6   equinox=j2000  vel=35.,35.
remarks=' SEST pos & vel.' /

source='P-OCeti', 'OCeti' CALCODE = 'L'
RA=02:19:20.793  DEC=-02:58:37.0  equinox=j2000  vel=45.0, 45.0
remarks='Baudry position, SEST spectrum' /

source='P-RAqr', 'SiO-RAqr', 'RAqr' CALCODE = 'L'
RA=23:43:49.44   DEC=-15:17:04.1  equinox=j2000  vel=-22.,-22.
remarks=' sest' /

source='P-RLeo', 'SiO-RLeo', 'RLeo' CALCODE = 'L'
RA=09:47:33.490  DEC=11:25:43.99  equinox=j2000  vel=3.0,3.0
remarks='baudry pos, sest vel.' /

endcat /


! ==========================================================
! ==================  Program control  =====================
! ==========================================================
!  Allow SCHED to overwrite existing files:
overwrit

sumitem = el1, early, dwell, slew, tpstart, pa1
! sumitem = el1, tpstart
!  Use automatic tape allocation on VLBA control system
!  antennas with 2 or more tape drives
autotape=2

stafile = $SCHED/catalogs/stations.dat

lineinit /
lineset='SiO431'   
restfreq=43114.03,43114.03,43122.03,43122.03,43130.03,43130.03,43138.03,43138.03
/
endlines /

linename = 'SiO431'

LST=VLBA_PT             ! for PieTown LST, centered at 2.5 hours


! ==========================================================
! =======================  Setup file  =====================
! ==========================================================

! 86 GHz setup, 8 x 8 MHz channels with two channels per polarization
! digitized with two bits.
setini = 3mm /
  nchan    = 8
  bits     = 2
  bbfilter = 8.0
  freqref  = 86244.99
  freqoff  = -11.50, -11.50, -3.50, -3.50, 4.50, 4.50, 12.50, 12.50
  netside  =  U, U, U, U, U, U, U, U
  pol      = dual 	
  /
endset /

! 43 GHz standard setup, 8 x 8 MHz channels with two channels per polarization
! digitized with two bits.
setini = 7mm /
  nchan    = 8
  bits     = 2
  bbfilter = 8.0
  freqref  =  43212.99
  freqoff  =  -11.50, -11.50,  -3.50,  -3.50,   4.50,   4.50,  12.50,
12.50
  netside  =  U, U, U, U, U, U, U, U
  pol      = dual
  /
endset /

! 22 GHz standard setup, 8 x 8 MHz channels with two channels per polarization
! digitized with two bits.
setini = 1cm /
  band='1cm'  nchan=8  bbfilt=8.0  pol=dual  bits=2 /
endset /

! 15 GHz standard setup, 8 x 8 MHz channels with two channels per polarization
! digitized with two bits.
setini = 2cm /
  band='2cm'  nchan=8  bbfilt=8.0  pol=dual  bits=2 /
endset /

! 8 GHz standard setup, 8 x 8 MHz channels with two channels per polarization
! digitized with two bits.
setini = 4cm /
  band='4cm'  nchan=8  bbfilt=8.0  pol=dual  bits=2 /
endset /

! 5 GHz standard setup, 8 x 8 MHz channels with two channels per polarization
! digitized with two bits.
setini = 6cm /
  band='6cm'  nchan=8  bbfilt=8.0  pol=dual  bits=2 /
endset /

! 2 GHz standard setup, 8 x 8 MHz channels with two channels per polarization
! digitized with two bits.
setini = 13cm /
  band='13cm'  nchan=8  bbfilt=8.0  pol=dual  bits=2 /
endset /

! ==========================================================
! ========================  The Scans  =====================
! ==========================================================

!year = 2003
!month = 10
day = 59730
start=22:00:00

! All
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK

! 3mm
! stations = HN, NL, FD, LA, PT, KP, OV, MK

! No 3mm
! stations = SC, BR

! ==========================================================
! Pointing scan
! ==========================================================
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 7mm source='P-RAqr' pcal=off doppler
bw=2 linena='SiO431' norecord peak=3 dwell=1:00 /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK

! Autocorrelation spectra of a SiO source to check the relative gains
setup = 7mm source='P-RAqr' pcal=off doppler linena='SiO431'
record nopeak bw=8 dwell=1:00 /
record nopeak nodop bw=8 pcal=' ' gap = 0

! ==========================================================
! First scan of the EVPA calibrator 3C454.3
! ==========================================================
setup = 7mm source='3C454.3' dwell=5:00 /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

! ==========================================================
! Pointing scan
! ==========================================================
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 7mm source='P-RAqr' pcal=off doppler
bw=2 linena='SiO431' norecord peak=3 dwell=1:00 /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK

! ==========================================================
! First scan of the program source
! ==========================================================
setup = 7mm  source='0235+164'
record  dwell=5:00 /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 13cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

! ==========================================================
! Pointing scan
! ==========================================================
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 7mm source='P-RAqr' pcal=off doppler
bw=2 linena='SiO431' norecord peak=3 dwell=1:00 /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK

! ==========================================================
! Second scan of the EVPA calibrator 3C454.3
! ==========================================================
setup = 7mm source='3C454.3'  dwell=5:00 /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

gap = 2:00

! ==========================================================
! Pointing scan
! ==========================================================
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 7mm source='P-OCeti' pcal=off doppler
bw=2 linena='SiO431' norecord peak=3 dwell=1:00 /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
record nopeak nodop bw=8 pcal=' ' gap = 0

! ==========================================================
! 2. scan of the program source
! ==========================================================
setup = 7mm  source='0235+164'
record  dwell=4:30 /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 13cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

! ==========================================================
! Pointing scan
! ==========================================================
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 7mm source='P-OCeti' pcal=off doppler
bw=2 linena='SiO431' norecord peak=3 dwell=1:00 /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
record nopeak nodop bw=8 pcal=' ' gap= 0

! ==========================================================
! First scan of the D-term calibrator
! ==========================================================
setup = 7mm dwell=3:00 source='0420-014' /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

! ==========================================================
! 3. scan of the program source
! ==========================================================
setup = 7mm  source='0235+164'
record  dwell=4:50 /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 13cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

gap = 2:00

! ==========================================================
! Pointing scan
! ==========================================================
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 7mm source='P-RAqr' pcal=off doppler
bw=2 linena='SiO431' norecord peak=3 dwell=1:00 /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
record nopeak nodop bw=8 pcal=' ' gap= 0

! ==========================================================
! Third scan of the EVPA calibrator 3C454.3
! ==========================================================
setup = 7mm source='3C454.3'  dwell=3:00 /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm gap = 0 /
setup = 1cm /
setup = 6cm /
setup = 2cm /

! ==========================================================
! Pointing scan
! ==========================================================
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 7mm source='P-IkTau' pcal=off doppler
bw=2 linena='SiO431' norecord peak=3 dwell=1:00 /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
record nopeak nodop bw=8 pcal=' ' gap= 0

! ==========================================================
! 4. scan of the program source
! ==========================================================
setup = 7mm  source='0235+164'
record  dwell=7:20 /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 13cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

! ==========================================================
! Second scan of the D-term calibrator
! ==========================================================
setup = 7mm dwell=3:00 source='0420-014' /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

gap = 2:00

! ==========================================================
! Pointing scan
! ==========================================================
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 7mm source='P-IkTau' pcal=off doppler
bw=2 linena='SiO431' norecord peak=3 dwell=1:00 /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
record nopeak nodop bw=8 pcal=' ' gap= 0

! ==========================================================
! 5. scan of the program source
! ==========================================================
setup = 7mm  source='0235+164'
record  dwell=4:30 /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 13cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

! ==========================================================
! Third scan of the D-term calibrator
! ==========================================================
setup = 7mm dwell=3:00 source='0420-014' /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

! ==========================================================
! Pointing scan
! ==========================================================
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 7mm source='P-IkTau' pcal=off doppler
bw=2 linena='SiO431' norecord peak=3 dwell=1:00 /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK

! Autocorrelation spectra of a SiO source to check the relative gains
setup = 7mm source='P-IkTau' pcal=off doppler linena='SiO431'
record nopeak bw=8 dwell=1:00 gap = 0 /
record nopeak nodop bw=8 pcal=' ' gap = 0

! ==========================================================
! 6. scan of the program source
! ==========================================================
setup = 7mm  source='0235+164'
record  dwell=4:30 /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 13cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

gap = 2:00

! ==========================================================
! Pointing scan
! ==========================================================
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 7mm source='P-IkTau' pcal=off doppler
bw=2 linena='SiO431' norecord peak=3 dwell=1:00 /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
record nopeak nodop bw=8 pcal=' ' gap= 0

! ==========================================================
! Fourth scan of the D-term calibrator
! ==========================================================
setup = 7mm dwell=3:00 source='0420-014' /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

! ==========================================================
! Pointing scan
! ==========================================================
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 7mm source='P-RLeo' pcal=off doppler
bw=2 linena='SiO431' norecord peak=3 dwell=1:00 /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
record nopeak nodop bw=8 pcal=' ' gap= 0

! ==========================================================
! First scan of the EVPA calibrator OJ287
! ==========================================================
setup = 7mm source='OJ287' dwell = 3:00 /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

! ==========================================================
! Pointing scan
! ==========================================================
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 7mm source='P-IKTau' pcal=off doppler
bw=2 linena='SiO431' norecord peak=3 dwell=1:00 /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
record nopeak nodop bw=8 pcal=' ' gap= 0

! ==========================================================
! 7. scan of the program source
! ==========================================================
setup = 7mm  source='0235+164'
record  dwell=4:30 /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 13cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

gap = 2:00

! ==========================================================
! Pointing scan
! ==========================================================
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 7mm source='P-IkTau' pcal=off doppler
bw=2 linena='SiO431' norecord peak=3 dwell=1:00 /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
record nopeak nodop bw=8 pcal=' ' gap= 0

! ==========================================================
! Fifth scan of the D-term calibrator
! ==========================================================
setup = 7mm dwell=3:00 source='0420-014' /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

! ==========================================================
! Pointing scan
! ==========================================================
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 7mm source='P-RLeo' pcal=off doppler
bw=2 linena='SiO431' norecord peak=3 dwell=1:00 /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
record nopeak nodop bw=8 pcal=' ' gap= 0

! ==========================================================
! Second scan of the EVPA calibrator OJ287
! ==========================================================
setup = 7mm source='OJ287' dwell = 3:00 /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /

! ==========================================================
! Pointing scan
! ==========================================================
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 7mm source='P-IKTau' pcal=off doppler
bw=2 linena='SiO431' norecord peak=3 dwell=1:00 /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
record nopeak nodop bw=8 pcal=' ' gap= 0

! ==========================================================
! 8. scan of the program source
! ==========================================================
setup = 7mm  source='0235+164'
record  dwell=4:00 /
stations = HN, NL, FD, LA, PT, KP, OV, MK
setup = 3mm /
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK
setup = 4cm /
setup = 13cm /
setup = 1cm /
setup = 6cm /
setup = 2cm /