! ================================================================
!   Preferred Dynamic Contraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           o   o   o   o   o   o   o   o   o   o
!       Minimum number of stations [9 (6 for 3mm)]:
!       May we swap PT for a single VLA antenna? [yes]
!          Consult http://www.aoc.nrao.edu/~gtaylor/y1gotcha.html
!          to decide.  If you adopt the default, then both PT and
!          VLA1 must be in the stations list in the keyin file.
!    Bands and polarizations.  Below each band code, insert "R" 
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual 
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!           90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!                              d
! Weather constraints:
!    [appropriate for bands marked "L", "R", or "d" above
!     and for at least the minimum number of stations]
! Date constraints:
!    Preferred date(s), usually a series start [none]:
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days [none]:
!    Special conditions (e.g., a series with different
!       spacings in time) [none]:
! ================================================================
!
!
!
!  BS135A  'VLBI monitoring of CSOs' -- Standard continuum X band
!
! =================  Cover Information  ====================

version  = 1
expt     = 'VLBI monitoring of CSOs'
expcode  = BS135A
obstype  = VLBA
piname   = 'Carlo Stanghellini'
address1 = 'IRA, CNR, Bologna'
address2 = 'Via Gobetti, 101'
address3 = 'I-40129 Bologna'
address4 = 'Italy'
phone    = '+39 051 639 9370'
obsphone = '+39 051 639 9370'
email    = 'cstan@ira.cnr.it'
fax      = '+39 051 639 9431'
obsmode  = 'Continuum'
correl   = 'Socorro'           
note1    = ''

! ==============  Correlator Information  ==================

correl   = 'Socorro'
coravg   = 2
corchan  = 16
cornant  = 10
corpol   = 'off'
corwtfn  = 'uniform'
corsrcs  = 'VLBA Data Base'
cortape  = DAT
corship1 = 'Daniele Dallacasa' 
corship2 = 'Istituto di Radioastronomia'
corship3 = 'via Gobetti 101'
corship4 = 'I-40129 Bologna - Italy'
cornote1 = '     
!
! ==================  Program control  =====================
!  Allow SCHED to overwrite existing files:
overwrit

!  Use automatic tape allocation on VLBA control system 
!  antennas with 2 or more tape drives
autotape=2

! ==================== Station Catalog  ====================

stafile = $SCHED/catalogs/stations.dat

! ==================== Source Catalog  =====================

srccat / 
source='B0703+468'   ra=07:03:06.0180 dec=+46:52:36.390      epoch='B1950' /
source='J1823+796'  ra=18:23:14.108686 dec=+79:38:49:002249 epoch='J2000' /
source='J1335+5844' ra=13:35:25.9276   dec=+58:44:00.286    epoch='J2000' /
source='J1800+784'   ra=18:00:45.683928 dec=+78:28:04.018465 epoch='J2000' /
source='DA193'      ra=05:55:30.805609 dec=+39:48:49.165    epoch='J2000' /
source='OQ208'      ra=14:07:00.394411 dec=+28:27:14.689942 epoch='J2000' /
endcat /
srcfile   = '$SCHED/catalogs/sources.vlba'

! ==================== Setup Information ===================

setup = '$SCHED/setups/v4cm-128-4-2-R.set'

! =================  Initial Scan Information  =============

day   = 59746              ! <---CHANGE THIS
LST = 'VLBA_PT'
start = 05:00:00

stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK

source='DA193'        dur = 02:30 / ! fringe finder and calibrator
source='B0703+468'        dur = 41:30     gap = 120 /
source='B0703+468'        dur = 44:00     gap = 0   /
source='B0703+468'        dur = 44:00     gap = 0   /
source='DA193'        dur = 02:30 / 
source='B0703+468'        dur = 41:30     gap = 120 /
source='B0703+468'        dur = 44:00     gap = 0   /
!
! now lst ~ 08:44  
!
source='J1335+5844'   dur = 44:00 /
source='DA193'        dur = 02:30 / 
source='B0703+468'        dur = 41:30 /   gap = 120 /
source='J1335+5844'   dur = 44:00     gap = 0   /  
source='B0703+468'        dur = 44:00 /   
source='J1335+5844'   dur = 44:00     gap = 120 /
source='OQ208'        dur = 02:30     gap = 0   /
source='B0703+468'        dur = 41:30 /   
source='J1335+5844'   dur = 22:00 /
source='J1335+5844'   dur = 30:00 /
!
! now lst ~ 13:56 
!
!end of key file