! ================================================================
!   Preferred Dynamic Contraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           o   o   o   o   o   o   o   o   o   o
!       Minimum number of stations [9 (6 for 3mm)]:
!       May we swap PT for a single VLA antenna? [no]
!          Consult http://www.aoc.nrao.edu/~gtaylor/y1gotcha.html
!          to decide.  If you adopt the default, then both PT and
!          VLA1 must be in the stations list in the keyin file.
!    Bands and polarizations.  Below each band code, insert "R" 
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual 
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!           90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!                                    d
! Weather constraints:
!    [appropriate for bands marked "L", "R", or "d" above
!     and for at least the minimum number of stations]
! Date constraints:
!    Preferred date(s), usually a series start [none]:
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days [none]:
!    Special conditions (e.g., a series with different
!       spacings in time) [none]:
! ================================================================
!
!
!
!  BL158 - 6 cm VLBA observations of NGC910, 3C75, UGC2489
!
! =================  Cover Information  ====================

version  = 1 
expt     = 'Imaging an unbiased sample of radio galaxies'
expcode  = BL158d
obstype  = VLBA
piname   = 'Elisabetta Liuzzo'    
address1 = 'Istituto di Radioastronomia'
address2 = 'Via Gobetti 101'
address3 = 'I-40129 Bologna'
address4 = 'Italy'
phone    = '+39 051 639 9364'
obsphone = '+39 051 639 9364'
email    = 'liuzzo@ira.inaf.it'
fax      = '+39 051 639 9431'
obsmode  = 'Continuum'
correl   = 'Socorro'           
note1    = '' 

! ==============  Correlator Information  ==================

correl   = 'Socorro'
coravg   = 2
corchan  = 16
cornant  = 10
corpol   = 'on'
corwtfn  = 'uniform'
corsrcs  = 'VLBA Data Base'
cortape  = DAT
corship1 = 'Elisabetta Liuzzo'
corship2 = 'Istituto di Radioastronomia'
corship3 = 'via Gobetti 101'
corship4 = '40129 Bologna - Italy'
cornote1 = '' 
!
! ==================  Program control  =====================
!  Allow SCHED to overwrite existing files:
overwrit

!  Use automatic tape allocation on VLBA control system 
!  antennas with 2 or more tape drives
autotape=2

! ==================== Station Catalog  ====================

stafile = $SCHED/catalogs/stations.dat


srccat / 
  equinox='J2000'       
  source='NGC7768'           ra=23:50:58.60  dec=27:08:50.0 / ! NVSS
  source='NGC910'            ra=02:25:26.77  dec=41:49:27.3 / ! Ottico-nvss
  source='3C75A'             ra=02:57:41.65  dec=06:01:20.7 / ! Owen et al 1995
  source='3C75B'             ra=02:57:41.57  dec=06:01:36.8 / ! Owen et al 1995
  source='NGC2832'           ra=09:19:46.87  dec=33:44:59.6 / ! Ottico-Nvss
  source='NGC6086'           ra=16:12:35.59  dec=29:29:04.8 / ! Ledlow et al. 1995
  source='NGC6173'           ra=16:29:44.90  dec=40:48:41.8 / ! Becker et al 1995
  source='4C29.41'           ra=11:16:34.50  dec=29:15:16.5 / ! mappa VLBA-ottico
  source='NGC3550'           ra=11:10:38.50  dec=28:46:04.0 / ! mappa FIRST
  source='IC2738'            ra=11:21:23.06  dec=34:21:24.0 / ! mappa FIRST
  source='CGCG261-059'       ra=07:22:07.10  dec=55:52:29.5 / ! mappa FIRST
  source='UGC2489'           ra=03:01:51.87  dec=35:50:20.1 / ! mappa NVSS
  source='UGC3274'           ra=05:16:38.91  dec=06:25:26.3 / ! mappa NVSS
endcat /
srcfile   = '$SCHED/catalogs/sources.vlba'


! ==================== Setup Information ===================

setup = '$SCHED/setups/v6cm-128-4-2.set'

! =================  Initial Scan Information  =============

day   = 61233
LST = 'VLBA_PT'
start = 23:00:00
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK

sumitem = el1, el2, dwell, slew


source = J2347+2719 dwell = 75   / ! C
group 2 rep 15	
                source = NGC7768 dur = 240 / ! T1
		source = J2347+2719 dur = 75 / ! C

source = 3C84 dwell=300 / ! polarization calibrator


source = J0237+2848 dwell = 300  /		! fringe finder 

source = J2347+2719 dwell =75   / ! C
group 2 rep 15	
                source = NGC7768 dur = 240 / ! T1
		source = J2347+2719 dur = 75 / ! C

source = 3C84 dwell=300 / ! polarization calibrator


source = J0237+2848 dwell = 300  /		! fringe finder 


source = J0517+0648 dwell = 75   / ! C
group 2 rep 14	
                source = UGC3274 dur = 240 / ! T1
		source = J0517+0648 dur = 75 / ! C

source = 3C84 dwell=300 / ! polarization calibrator


source = J0517+0648 dwell = 75   / ! C
group 2 rep 15	
                source = UGC3274 dur = 240 / ! T1
		source = J0517+0648 dur = 75 / ! C

source = UGC3274 dur = 80 / ! T1
source = J0517+0648 dur = 75 / ! C


source = 3C84 dwell=300 / ! polarization calibrator

source = J0237+2848 dwell = 300  /		! fringe finder 

		
source = J0919+3324 dwell = 75   / ! C
group 2 rep 30	
                source = NGC2832 dur = 240 / ! T1
		source = J0919+3324 dur = 75 / ! C

source = 3C84 dwell=300 / ! polarization calibrator