! ================================================================ ! Preferred Dynamic Constraints. Alter [defaults] as desired. ! ================================================================ ! Equipment constraints: ! Stations. Below each station code, the "o" indicates an ! [optional] station that is to be used if it is available. ! Change "o" to "r" if the station is required or change ! "o" to "n" if the station is not to be used. ! SC HN NL FD LA PT KP OV BR MK ! o o o o o o o o o o ! Minimum number of stations [9 (6 for 3mm)]: 9 ! May we swap PT for a single VLA antenna? [no] ! Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html ! to decide. If you adopt the default, then both PT and ! VLA1 must be in the stations list in the keyin file. ! Bands and polarizations. Below each band code, insert "R" ! if the righthand polarization is to be used, "L" if the ! lefthand polarization is to be used, "d" if dual ! polarizations are to be used, or "o" if the band is in ! your setups but scheduling should not be constrained by ! its availability. ! 90cm 50cm 20cm 13cm 6cm 4cm 2cm 1cm 7mm 3mm ! d d d ! Weather constraints: none ! [appropriate for bands marked "L", "R", or "d" above ! and for at least the minimum number of stations] ! Date constraints: ! Preferred date(s), usually a series start [none]: ! Excluded dates plus reason [none]: ! Preferred interval between segments in days [none]: 40-60 days ! Special conditions (e.g., a series with different ! spacings in time) [none]: ! ================================================================ ! ! ================================================================ ! Control Information ! ================================================================ overwrite ! Prevents need to clean out old files on restart. autotape = 2 ! Automatic tape allocation on 2 drive stations. sumitem = el1, early ! Control items in summary file. ! ! ================================================================ ! Cover information (PI, experiment ...) ! ================================================================ version = 1 expt = 'BG176 / Annual modulation candidate J1128+5925 / Gabanyi et al.' expcode = 'BG176F' obstype = 'VLBA' piname = 'Krisztina Eva Gabanyi' address1 = 'FOMI, Satellite Geodetic Observatory' address2 = 'P.O. Box 585' address3 = 'Budapest, 1592' address4 = 'Hungary' email = 'gabanyik@sgo.fomi.hu' phone = '+36 27 374980 (w) / +36 20 5375474 (m)' obsphone = '+36 20 5375474' fax = '+36 27 374982' obsmode = 'At 6cm, 3.6cm, 2cm; dual pol; recording 256 Mbit/s' note1 = 'observations scheduled in 6 epochs, separated by 6-8 weeks' note2 = 'fringe finder, calibrator: J0927+3902=4C39.25' note3 = 'polarized, compact, D-term calibrator: J1038+0512' ! ! ================================================================ ! Correlator section ! ================================================================ correl = 'Socorro' coravg = 2 corchan = 16 cornant = 10 corpol = 'on' corwtfn = 'uniform' corsrcs = 'standard' cortape = 'ftp' corship1 = 'Krisztina Gabanyi' corship2 = 'FOMI, Satellite Geodetic Observatory, P.O. Box 585' corship3 = 'Budapest, 1592' corship4 = 'Hungary' ! ! ================================================================ ! Catalogs. These are the standard ones and are the defalts. ! ================================================================ srcfile = '$SCHED/catalogs/sources.vlba' stafile = '$SCHED/catalogs/stations.dat' ! ! ================================================================ ! The schedule ! ================================================================ lst = VLBA_PT day = 61238 ! local sidereal day ! year = 2007 month = 09 day = 30 start = 08:30:00 stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK !! setup = '$SCHED/setups/v6cm-256-8-2.set' !! setup = '$SCHED/setups/v4cm-256-8-2.set' !! setup = '$SCHED/setups/v2cm-256-8-2.set' ! ! ========================================================== ! ======================== The Scans ===================== ! ========================================================== ! ! fringe finder 4C39.25 setup = '$SCHED/setups/v6cm-256-8-2.set' Source = J0927+3902 Dwell = 4:00 Gap= 0:00 / setup = '$SCHED/setups/v4cm-256-8-2.set' Source = J0927+3902 Dwell = 4:00 Gap= 0:00 / setup = '$SCHED/setups/v2cm-256-8-2.set' Source = J0927+3902 Dwell = 4:00 Gap= 0:00 / ! polarized calibrator source = J1038+0512 Dwell = 5:00 Gap= 0:00 / setup = '$SCHED/setups/v4cm-256-8-2.set' Source = J1038+0512 Dwell = 5:00 Gap= 0:00 / setup = '$SCHED/setups/v6cm-256-8-2.set' Source = J1038+0512 Dwell = 5:00 Gap= 0:00 / ! target Source = J1128+5925 Dwell = 19:30 Gap= 0:00 / setup = '$SCHED/setups/v4cm-256-8-2.set' Source = J1128+5925 Dwell = 19:30 Gap= 0:00 / setup = '$SCHED/setups/v2cm-256-8-2.set' Source = J1128+5925 Dwell = 19:30 Gap= 0:00 / ! polarized calibrator Source = J1038+0512 Dwell = 5:00 Gap= 0:00 / setup = '$SCHED/setups/v4cm-256-8-2.set' Source = J1038+0512 Dwell = 5:00 Gap= 0:00 / setup = '$SCHED/setups/v6cm-256-8-2.set' Source = J1038+0512 Dwell = 5:00 Gap= 0:00 / ! target Source = J1128+5925 Dwell = 18:30 Gap= 0:00 / setup = '$SCHED/setups/v4cm-256-8-2.set' Source = J1128+5925 Dwell = 18:30 Gap= 0:00 / setup = '$SCHED/setups/v2cm-256-8-2.set' Source = J1128+5925 Dwell = 18:30 Gap= 0:00 / ! fringe finder 4C39.25 Source = J0927+3902 Dwell = 4:00 Gap= 0:00 / setup = '$SCHED/setups/v4cm-256-8-2.set' Source = J0927+3902 Dwell = 4:00 Gap= 0:00 / setup = '$SCHED/setups/v6cm-256-8-2.set' Source = J0927+3902 Dwell = 4:00 Gap= 0:00 / ! polarized calibrator Source = J1038+0512 Dwell = 5:00 Gap= 0:00 / setup = '$SCHED/setups/v4cm-256-8-2.set' Source = J1038+0512 Dwell = 5:00 Gap= 0:00 / setup = '$SCHED/setups/v2cm-256-8-2.set' Source = J1038+0512 Dwell = 5:00 Gap= 0:00 / ! target Source = J1128+5925 Dwell = 18:30 Gap= 0:00 / setup = '$SCHED/setups/v4cm-256-8-2.set' Source = J1128+5925 Dwell = 18:30 Gap= 0:00 / setup = '$SCHED/setups/v6cm-256-8-2.set' Source = J1128+5925 Dwell = 18:30 Gap= 0:00 / ! ! polarized calibrator Source = J1038+0512 Dwell = 5:00 Gap= 0:00 / setup = '$SCHED/setups/v4cm-256-8-2.set' Source = J1038+0512 Dwell = 5:00 Gap= 0:00 / setup = '$SCHED/setups/v2cm-256-8-2.set' Source = J1038+0512 Dwell = 5:00 Gap= 0:00 / ! target Source = J1128+5925 Dwell = 18:30 Gap= 0:00 / setup = '$SCHED/setups/v4cm-256-8-2.set' Source = J1128+5925 Dwell = 18:30 Gap= 0:00 / setup = '$SCHED/setups/v6cm-256-8-2.set' Source = J1128+5925 Dwell = 18:30 Gap= 0:00 / ! polarized calibrator Source = J1038+0512 Dwell = 4:30 Gap= 0:00 / setup = '$SCHED/setups/v4cm-256-8-2.set' Source = J1038+0512 Dwell = 4:30 Gap= 0:00 / setup = '$SCHED/setups/v2cm-256-8-2.set' Source = J1038+0512 Dwell = 4:30 Gap= 0:00 / ! fringe finder 4C39.25 Source = J0927+3902 Dwell = 4:00 Gap= 0:00 / setup = '$SCHED/setups/v4cm-256-8-2.set' Source = J0927+3902 Dwell = 4:00 Gap= 0:00 / setup = '$SCHED/setups/v6cm-256-8-2.set' Source = J0927+3902 Dwell = 4:00 Gap= 0:00 / ! ! ======================================== ! ================ End ================ ! ========================================