!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!
! BD132, 4.8 and 14.5GHz, Dynamic scheduling, 12h center on  LST (PT)
!
! Days of the year: Dynamical scheduling, 
!
! Frequency cm dual polarization on
!   Line : MHz
!
! Total schedule time: ~12H00 (19-07h00 LST PT) Centered at LST 1.5 (4C31)
! Total schedule time: ~12H00 (08-20h00 LST PT) Centered at LST 14.0 (3C293)
!     with 128 Mbits/sec recording
!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!      
! ================================================================
!   Preferred Dynamic Contraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           r   r   r   r   r   r   r   r   r   r
!       Minimum number of stations [9 (6 for 3mm)]: 10
!       May we swap PT for a single VLA antenna? [yes] no
!    Bands and polarizations.  Below each band code, insert "R" 
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual 
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!        90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!                                dual      dual
! Weather constraints: normal or good weather conditions
!    [appropriate for bands marked "L", "R", or "d" above
!     and for at least the minimum number of stations]
! Date constraints: 
!    Preferred date(s), usually a series start [none]: none
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days [none]:
!    Special conditions (e.g., a series with different
!       spacings in time) [none]:
! ================================================================
!
! ==========================================================
! =================  Cover Information  ====================
! ==========================================================
!
version  = 1       ! Edited the 22-JAN-2007
expt     = 'Mapping H2CO abs. in 4C31.04 and 3C293'
expcode  = 'bd132a'
piname   = 'JFD'
address1 = 'Observatorio Astronomico Nacional'
phone    = '34 1 527 01 07'
obsphone = '34 1 527 01 07'
fax      = '34 1 527 19 35'
email    = 'desmurs@oan.es'
obsmode  = 'VLBA 2cm&6cm 128-2-2: 2 Pol & 1 spectral lines, 16MHz.'
obstype  = 'VLBA'
note1    = 'This is a line experiment at 2 and 6 cm'
note2    = 'For 6cm band, line frequency is 4557.18 '
note3    = '** SWITCH PHAS CAL OFF ** please, thank you'

!
! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================
 
correl   = 'Socorro'
coravg   = 4
corchan  = 512
cornant  = 10
corpol   = 'off'
corwtfn  = 'uniform'
corsrcs  = 'standard'
cortape  = DAT
corship1 = 'J.-F. Desmurs'
corship2 = 'Observatorio Astronomico Nacional'
corship3 = 'C/ Alfonso XII, 3.'
corship4 = '28014 Madrid - Spain'
!
! ==========================================================
! ==================  Program control  =====================
! ==========================================================
!
!    Normally SCHED will not overwrite preexisting files.  If
!    you do not want this protection, uncomment the following line:
 overwrit
!
!    To only process VLBA and VLA stations, uncomment the following line:
! dosta 'vl'
!
! ==========================================================
! =================== Tape initialization  =================
! ==========================================================
!
!**  WARNING: Check with data analysts that the following tape  **
!**           information is correct for YOUR project          **
autotape = 2
sumitem = el1, el2, tape1, tape2, early, dwell
!tapeini /
!  tpsta   = vlba,    default
!  tpdrive = 1,             1
!  tplength= 17600,      8800
!  ndrives = 1,             1
!  nheadpos= 14,           14
!  density = H,             L
!   /
!
! ==========================================================
! ==============  Spectral line rest frequecies  ===========
! ==========================================================
!
lineinit /
lineset='h2co1_4c' restfreq= 13670.9756,   13670.9756 /
lineset='h2co2_4c' restfreq=  4557.1806,    4557.1806 /
lineset='h2co1_3c' restfreq= 13864.5933,   13864.5933 /
lineset='h2co2_3c' restfreq=  4621.722488,  4621.722488 /
endlines /

!
! ==========================================================
! ==================  Observing Setup   ====================
! ==========================================================
!
setinit = h2co_2cm_4c31.set /
! Based: Standard setup file: v2cm-64-2-2.set                         
!  Modified by J-F Desmurs 22JAN2007
!     (Produced by MAKESETUP)
!      For the the 2 cm band.
!        Radio Astronomy allocation:  15350-15400
!        Radio Astronomy footnote(?): 14470-14500
!
!        There are 4 filters in the VLBA IF converter.  They are
!        11820-12980, 12820-13980, 13820-14980, and 14770-15630 GHz.
!        The filter is chosen based on the frequency of the first channel
!        assuming an upper sideband first mix.  The splits are at 12.9,
!        13.9 and 14.9 Ghz.
!
!        VLA band 14650 - 15325 MHz for 0.9 sensitivity
!        Methanol has a rest frequency of 12178.595 MHz
!
!     Format      Tape length  Density  Tape speed  Time/pass
! VLBA/MkIII/MkIV    17600      High      80.0         44:00
!    MkIII/MkIV       8800      Low      135.0         13.02
!      64 Mbps - 2 pass/headpos
!
  nchan    = 2
  bits     = 2
  bbfilter = 16.0        ! At 14.5GHz ->  331km/s
!!!!!!!!!!!!!!!!!!!!!!!!!!
  pcal = 'off'
!!!!!!!!!!!!!!!!!!!!!!!!!!
!
! Rest Freq 14488.5.0 MHz
!           Red Schift(0.0592)+175km/s = 13670.9756
!
  freqref  =  13670.97 ! Freq. rest 4C31.04
!  firstlo  =  .00 ! Selected LO 
  freqoff  =  -0.50,  -0.50
  netside  =  U, U
  bbc      =  1, 2
  pol      = dual
  STATION = VLBA /
  endset  /
!
setinit = h2co_6cm_4c31.set /
! Based: Standard setup file: v6cm-64-2-2.set                         
!  Modified by J-F Desmurs 22JAN2007
!     (Produced by MAKESETUP)
!      For the 6 cm band.
!        Radio Astronomy allocation: 4990-5000
!        Radio Astnomomy footnote:   4950-4990
!        VLA 50MHz 4960.1 to 5010.1 with VC mode.
!        VLA 6cm receiver falling off at high end.
!      Reference frequency is Mark II network standard
!      Merlin 4986-5002

!     Format      Tape length  Density  Tape speed  Time/pass
! VLBA/MkIII/MkIV    17600      High      80.0         44:00
!    MkIII/MkIV       8800      Low      135.0         13.02
!      64 Mbps - 2 pass/headpos
!
  nchan    = 2
  bits     = 2
  bbfilter = 16.0        ! At 5GHz ->  1000km/s
!!!!!!!!!!!!!!!!!!!!!!!!!!
  pcal = 'off'
!!!!!!!!!!!!!!!!!!!!!!!!!!
!
! Rest Freq 4829.7 MHz 4557.18 MHz
!           Red Schift(0.0592)+175km/s =4557.1806 MHz
!
  freqref  =  4557.18 ! Freq. rest 4C31.04
!  firstlo  =  .00 ! Selected LO 
  freqoff  =  -0.50,  -0.50
  netside  =  U, U
  pol      = dual
  STATION = VLBA /
  endset  /
!
! ==========================================================
! ====================  Source Catalog  ====================
! ==========================================================
!
srccat /
EPOCH='J2000'

! Source

  SOURCE='4C31.04' RA=01:19:35.000608 DEC=+32:10:50.0552 
                     VEL = 0.0 REMARKS='Freq Redshiter z=0.0598' /

!  SOURCE='3C293'   RA=13:52:17.800 DEC=+31:26:46.48
!                     VEL = 0.0 REMARKS='Freq Redshiter z=0.0450' /
! Calibrators

  SOURCE='3C454.3'  RA=22:53:57.7479430 DEC=  16:08:53.560890 
                     RAERR=   0.310 DECERR=   0.200 CALCODE='V' 
                     REMARKS='VLBA Calib Survey-GSFC sols L.Petrov 2005' /

  SOURCE='0234+285' RA=02:37:52.4056790 DEC=  28:48:08.990050 
                     RAERR=   0.230 DECERR=   0.400 CALCODE='V' 
                     REMARKS='VLBA Calib Survey-GSFC sols L.Petrov 2005' /

  SOURCE='J0119+3210' RA=01:19:35.0033680 DEC=  32:10:50.057690 
                     RAERR=   7.370 DECERR=   5.350 CALCODE='V' 
                     REMARKS='VLBA Calib Survey-GSFC sols L.Petrov 2005' /

endcat /
! 
! ==========================================================
! ====================  Station Catalog  ===================
! ==========================================================
!
stafile  = '$SCHED/catalogs/stations.dat'
!
! ==========================================================
! =================  Initial Scan Information  =============
! ==========================================================
!
stations = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, 
           VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK

LST    = 'VLBA_PT' ! Schedule in PT LST.

year   = 2008
!month  = 02
day    = 61231
start  = 19:00:00 ! 
!
! ==========================================================
! ========================  The Scans  =====================
! ==========================================================
!
!     Note that first "GAP" after START is ignored.
!
! Tape speeds: Low density - 133.330 ips,  High density -  80.00 ips
! Time per pass for  17600 ft, High density tapes is: 00:44:00
!
!Pos Fring Source 4C39.25, 3C345, 3C454.3 
!
setup  = 'h2co_2cm_4c31.set'
linename = 'h2co1_4c31' 
doppler
!
group 2 repeat 2
  source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
  source = 4C31.04    dwel 00:25:00 dopsrc '4C31.04' /
!
source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
!
setup  = 'h2co_6cm_4c31.set'
linename = 'h2co2_4c31' 
doppler
!
group 2 repeat 2
  source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
  source = 4C31.04    dwel 00:25:00 dopsrc '4C31.04' /
!
source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
!
!
!
setup  = 'h2co_2cm_4c31.set'
linename = 'h2co1_4c31' 
doppler
!
group 2 repeat 2
  source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
  source = 4C31.04    dwel 00:25:00 dopsrc '4C31.04' /
!
source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
!
source = 0234+285 dwel 00:04:00 dopsrc '4C31.04' / 
!
setup  = 'h2co_6cm_4c31.set'
linename = 'h2co2_4c31' 
doppler
!
source = 0234+285 dwel 00:04:00 dopsrc '4C31.04' / 
!
group 2 repeat 2
  source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
  source = 4C31.04    dwel 00:25:00 dopsrc '4C31.04' /
!
source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
!
!
!
setup  = 'h2co_2cm_4c31.set'
linename = 'h2co1_4c31' 
doppler
!
group 2 repeat 2
  source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
  source = 4C31.04    dwel 00:25:00 dopsrc '4C31.04' /
!
source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
!
setup  = 'h2co_6cm_4c31.set'
linename = 'h2co2_4c31' 
doppler
!
group 2 repeat 2
  source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
  source = 4C31.04    dwel 00:25:00 dopsrc '4C31.04' /
!
source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
!
!
!
setup  = 'h2co_2cm_4c31.set'
linename = 'h2co1_4c31' 
doppler
!
group 2 repeat 2
  source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
  source = 4C31.04    dwel 00:25:00 dopsrc '4C31.04' /
!
source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
!
source = 0234+285 dwel 00:04:00 dopsrc '4C31.04' / 
!
setup  = 'h2co_6cm_4c31.set'
linename = 'h2co2_4c31' 
doppler
!
source = 0234+285 dwel 00:04:00 dopsrc '4C31.04' / 
!
group 2 repeat 2
  source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
  source = 4C31.04    dwel 00:25:00 dopsrc '4C31.04' /
!
source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
!
!
!
setup  = 'h2co_2cm_4c31.set'
linename = 'h2co1_4c31' 
doppler
!
group 2 repeat 2
  source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
  source = 4C31.04    dwel 00:25:00 dopsrc '4C31.04' /
!
source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
!
source = 0234+285 dwel 00:04:00 dopsrc '4C31.04' / 
!
setup  = 'h2co_6cm_4c31.set'
linename = 'h2co2_4c31' 
doppler
!
source = 0234+285 dwel 00:04:00 dopsrc '4C31.04' / 
!
group 2 repeat 2
  source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
  source = 4C31.04    dwel 00:25:00 dopsrc '4C31.04' /
!
source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
!
!
!
setup  = 'h2co_2cm_4c31.set'
linename = 'h2co1_4c31' 
doppler
!
group 2 repeat 1
  source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
  source = 4C31.04    dwel 00:43:00 dopsrc '4C31.04' /
!
source = J0119+3210 dwel 00:03:00 dopsrc '4C31.04' /
!
setup  = 'h2co_6cm_4c31.set'
linename = 'h2co2_4c31' 
doppler
!
group 2 repeat 1
  source = J0119+3210 dwel 00:02:50 dopsrc '4C31.04' /
  source = 4C31.04    dwel 00:40:00 dopsrc '4C31.04' /
!
source = J0119+3210 dwel 00:02:50 dopsrc '4C31.04' /
!
!
!
!
!
! END
!
! plo sch = bd132a.key /
!