overwrite ! !dosta'kp' ! ! ! ========================================================== ! ================= Cover Information ==================== ! ========================================================== ! expt = 'RIPL: GJ412B/GJ3789' expcode = 'BB240R' version = 1 piname = 'Geoffrey Bower' address1 = '601 Campbell Hall' address2 = 'UC Berkeley Astronomy' address3 = 'Berkeley CA 94720' phone = '510 643-4704' obsphone = '510 847-1722' fax = '510 642 3411' ! telex = ' ' email = 'gbower@astro.berkeley.edu' obsmode = 'VLBA 512-8-2 4cm' obstype = 'VLBA' note1 = '' note2 = '' ! ! ========================================================== ! ============== Correlator Information ================== ! ========================================================== correl = 'Socorro' coravg = 0.26 corchan = 16 cornant = 11 corpol = 'off' corwtfn = 'uniform' corsrcs = 'standard' cortape = FTP corship1 = 'Geoffrey Bower' corship2 = '601 Campbell Hall' corship3 = 'UC Berkeley Astronomy' corship4 = 'Berkeley CA 94720' ! ! ================================================================ ! Preferred Dynamic Contraints. Alter [defaults] as desired. ! ================================================================ ! Equipment constraints: ! Stations. Below each station code, the "o" indicates an ! [optional] station that is to be used if it is available. ! Change "o" to "r" if the station is required or change ! "o" to "n" if the station is not to be used. ! SC HN NL FD LA PT KP OV BR MK ! o o o o o o o o o o ! Minimum number of stations [9 (6 for 3mm)]: 9 ! May we swap PT for a single VLA antenna? [yes] no ! Consult http://www.aoc.nrao.edu/~gtaylor/y1gotcha.html ! to decide. If you adopt the default, then both PT and ! VLA1 must be in the stations list in the keyin file. ! Bands and polarizations. Below each band code, insert "R" ! if the righthand polarization is to be used, "L" if the ! lefthand polarization is to be used, "d" if dual ! polarizations are to be used, or "o" if the band is in ! your setups but scheduling should not be constrained by ! its availability. ! 90cm 50cm 20cm 13cm 6cm 4cm 2cm 1cm 7mm 3mm ! d ! Weather constraints: ! [appropriate for bands marked "L", "R", or "d" above ! and for at least the minimum number of stations] ! Date constraints: ! Preferred date(s), usually a series start [none]: ! Excluded dates plus reason [none]: ! Preferred interval between segments in days [none]: 3 days ! Special conditions (e.g., a series with different ! spacings in time) [none]: Groups of (a,b,c), (d,e,f), (g,h,i), and ! (j,k,l) are independent. Each group consists of three identical epochs. ! Each epoch of a group should be observed ! within 10 days. ! ================================================================ ! ! ========================================================== ! =================== Tape initialization ================= ! ========================================================== !** WARNING: Check with data analysts that the following tape ** !** information is correct for YOUR project! ** ! autotape=2 srccat / !! Target: GJ412B RA=11:05:30.9000 DEC=+43:31:17.900 !! Primary cal: J1108+4330, 0.61, 0.15, C-VCS1 !! Secondary cal: J1110+4403, 1.17, 0.15, C-VCS1 SOURCE=GJ412B RA=11:05:30.9000 DEC=+43:31:17.900 EPOCH=2000.0 EQUINOX=J2000 PMRA=-4328.000000 PMDEC=952.000000 / !! PARALAX=206.900000 !! Target: GJ3789 RA=13:31:46.6140 DEC=+29:16:36.689 !! Primary cal: J1333+2725, 1.90, 0.21, C-VCS1 !! Secondary cal: J1329+3154 2.66 deg, 1.0 Jy C-VCS1 SOURCE=GJ3789 RA=13:31:46.6140 DEC=+29:16:36.689 EPOCH=2000.0 EQUINOX=J2000 PMRA=-234.000000 PMDEC=-137.000000 / !! PARALAX=126.000000 endcat / ! ! srcfile = '$SCHED/catalogs/sources.vlba' stafile = '$SCHED/catalogs/stations.dat' stations = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK, GBT_VLBA sumitem=el1,dwell,tape1,tape2 minpause=20 !------------------------------------------------ setup='$SCHED/setups/v4cm-512-8-2.set' year=2008 month=2 day=14 start=04:30:00 ! ! Modify the slew rate for the GBT for their winter speed restrictions. stacat / STATION=GBT_VLBA STCODE=Gb CONTROL=VLBA MOUNT = ALTAZ AX1RATE=18 AX2RATE=18 AX1ACC=0.05 AX2ACC=0.05 AX1LIM= -90, 450 AX2LIM= 5, 90 ! TSETTLE based on BK110 experience. This should be monitored. TSETTLE = 20.0 MINSETUP = 10 DISK=MARK5A MEDIADEF=DISK DAR=VLBA NBBC=8 ! RECORDER=VLBA NDRIVES=2 NHEADS=1 X= 882589.6370 Y= -4924872.3123 Z= 3943729.3522 DXDT= -0.01190 DYDT= -0.00390 DZDT= 0.00440 EPOCH=50449 FRAME='GSFC - solution 2005f' AXISTYPE='altz' AXISOFF= -0.0893 / endcat / !! first fringe finder source='4C39.25' dur=00:08:00 / !! pointing at GBT comment='GBT pointing scan.' peak=1 stations = gbt_vlba source = '3C286' dwell = 08:00 vlamode='VA' norecord / nopeak record stations = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK, GBT_VLBA !! GJ412B block 1/8 !! secondary calibrators source='J1108+4330' dwell=00:00:40 / source='J1110+4403' dur=00:01:10 / !! main loop group=2 repeat=5 source='J1108+4330' dur=00:01:10 / source='GJ412B' dur=00:03:00 / !! secondary calibrators source='J1108+4330' dur=00:01:10 / source='J1110+4403' dur=00:01:10 / !! GJ412B block 2/8 !! secondary calibrators source='J1108+4330' dwell=00:00:40 / source='J1110+4403' dur=00:01:10 / !! main loop group=2 repeat=5 source='J1108+4330' dur=00:01:10 / source='GJ412B' dur=00:03:00 / !! secondary calibrators source='J1108+4330' dur=00:01:10 / source='J1110+4403' dur=00:01:10 / source='J1108+4330' dur=00:01:10 / !! GJ3789 block 1/7 !! secondary calibrators source='J1333+2725' dwell=00:00:40 / source='J1329+3154' dur=00:01:20 / !! main loop group=2 repeat=3 source='J1333+2725' dur=00:01:20 / source='GJ3789' dur=00:03:00 / !! secondary calibrators source='J1333+2725' dur=00:01:20 / source='J1329+3154' dur=00:01:20 / source='J1333+2725' dur=00:01:20 / !! GJ412B block 3/8 !! secondary calibrators source='J1108+4330' dwell=00:00:40 / source='J1110+4403' dur=00:01:10 / !! main loop group=2 repeat=5 source='J1108+4330' dur=00:01:10 / source='GJ412B' dur=00:03:00 / !! secondary calibrators source='J1108+4330' dur=00:01:10 / source='J1110+4403' dur=00:01:10 / source='J1108+4330' dur=00:01:10 / !! GJ3789 block 2/7 !! secondary calibrators source='J1333+2725' dwell=00:00:40 / source='J1329+3154' dur=00:01:20 / !! main loop group=2 repeat=5 source='J1333+2725' dur=00:01:20 / source='GJ3789' dur=00:03:00 / !! secondary calibrators source='J1333+2725' dur=00:01:20 / source='J1329+3154' dur=00:01:20 / source='J1333+2725' dur=00:01:20 / !! GJ412B block 4/8 !! secondary calibrators source='J1108+4330' dwell=00:00:40 / source='J1110+4403' dur=00:01:10 / !! main loop group=2 repeat=5 source='J1108+4330' dur=00:01:10 / source='GJ412B' dur=00:03:00 / !! secondary calibrators source='J1108+4330' dur=00:01:10 / source='J1110+4403' dur=00:01:10 / source='J1108+4330' dur=00:01:10 / !! GJ3789 block 3/7 !! secondary calibrators source='J1333+2725' dwell=00:00:40 / source='J1329+3154' dur=00:01:20 / !! main loop group=2 repeat=5 source='J1333+2725' dur=00:01:20 / source='GJ3789' dur=00:03:00 / !! secondary calibrators source='J1333+2725' dur=00:01:20 / source='J1329+3154' dur=00:01:20 / source='J1333+2725' dur=00:01:20 / !! pointing at GBT comment='GBT pointing scan.' peak=1 stations = gbt_vlba source = '3C286' dwell = 08:00 vlamode='VA' norecord / nopeak record stations = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK, GBT_VLBA !! fringe finder source='4C39.25' dwell=00:02:00 / !! GJ412B block 5/8 !! secondary calibrators source='J1108+4330' dwell=00:00:40 / source='J1110+4403' dur=00:01:10 / !! main loop group=2 repeat=5 source='J1108+4330' dur=00:01:10 / source='GJ412B' dur=00:03:00 / !! secondary calibrators source='J1108+4330' dur=00:01:10 / source='J1110+4403' dur=00:01:10 / source='J1108+4330' dur=00:01:10 / !! GJ3789 block 4/7 !! secondary calibrators source='J1333+2725' dwell=00:00:40 / source='J1329+3154' dur=00:01:20 / !! main loop group=2 repeat=5 source='J1333+2725' dur=00:01:20 / source='GJ3789' dur=00:03:00 / !! secondary calibrators source='J1333+2725' dur=00:01:20 / source='J1329+3154' dur=00:01:20 / source='J1333+2725' dur=00:01:20 / !! GJ412B block 6/8 !! secondary calibrators source='J1108+4330' dwell=00:00:40 / source='J1110+4403' dur=00:01:10 / !! main loop group=2 repeat=5 source='J1108+4330' dur=00:01:10 / source='GJ412B' dur=00:03:00 / !! secondary calibrators source='J1108+4330' dur=00:01:10 / source='J1110+4403' dur=00:01:10 / source='J1108+4330' dur=00:01:10 / !! GJ3789 block 5/7 !! secondary calibrators source='J1333+2725' dwell=00:00:40 / source='J1329+3154' dur=00:01:20 / !! main loop group=2 repeat=5 source='J1333+2725' dur=00:01:20 / source='GJ3789' dur=00:03:00 / !! secondary calibrators source='J1333+2725' dur=00:01:20 / source='J1329+3154' dur=00:01:20 / source='J1333+2725' dur=00:01:20 / !! fringe finder source='3C345' dwell=00:02:00 / !! GJ412B block 7/8 !! secondary calibrators source='J1108+4330' dwell=00:00:40 / source='J1110+4403' dur=00:01:10 / !! main loop group=2 repeat=3 source='J1108+4330' dur=00:01:10 / source='GJ412B' dur=00:03:00 / !! secondary calibrators source='J1108+4330' dur=00:01:10 / source='J1110+4403' dur=00:01:10 / !! GJ3789 block 6/7 !! secondary calibrators source='J1333+2725' dwell=00:00:40 / source='J1329+3154' dur=00:01:20 / !! main loop group=2 repeat=5 source='J1333+2725' dur=00:01:20 / source='GJ3789' dur=00:03:00 / !! secondary calibrators source='J1333+2725' dur=00:01:20 / source='J1329+3154' dur=00:01:20 / !! GJ3789 block 7/7 !! secondary calibrators source='J1333+2725' dwell=00:00:40 / source='J1329+3154' dur=00:01:20 / !! main loop group=2 repeat=5 source='J1333+2725' dur=00:01:20 / source='GJ3789' dur=00:03:00 / !! secondary calibrators source='J1333+2725' dur=00:01:20 / source='J1329+3154' dur=00:01:20 / !!source='J1333+2725' dur=00:01:20 /