! ================================================================
!   Preferred Dynamic Contraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           o   o   o   o   o   o   o   o   o   o
!       Minimum number of stations: 7
!       May we swap PT for a single VLA antenna? [yes]
!          Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html
!          to decide.  If you adopt the default, then both PT and
!          VLA1 must be in the stations list in the keyin file.
!    Bands and polarizations.  Below each band code, insert "R" 
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual 
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!           90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!
! Weather constraints:
!    [appropriate for bands marked "L", "R", or "d" above
!     and for at least the minimum number of stations]
! Date constraints:
!    Preferred date(s), usually a series start [none]:
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days [none]:
!    Special conditions (e.g., a series with different
!       spacings in time) [none]:
! ================================================================
!  bb199b schedule (van Bemmel et al.)
!  This is scheduled for dynamic scheduling
!  Schedule by Henrique Schmitt, 02feb05
!  This program can make use of time when 2 or 3 antennas are out
!  of the array for maintnance or due to weather.
!
!
! inline source catalog **************************************************
srccat /
!
source = '3C465'         ra = 23:38:29.36529
                    dec     = +27:01:53.1505
                    epoch   = 'J2000'
                    calcode = ' ' /
! 1st rg
source = 'J2340+2708'    ra = 23:40:00.838900
                    dec     = +27:08:01.37300
                    epoch   = 'J2000'
                    calcode = 'J'/
! 1st phase reference
source = 'J2340+2641'    ra = 23:40:29.029463
                    dec     = 26:41:56.80485
                    epoch   = 'J2000'
                    calcode = 'J'/
! 1st phase check
!
source = 'J0019+2021'    ra = 00:19:37.854504
                    dec     = 20:21:45.64461
                    epoch   = 'J2000'
                    calcode = 'J'/
! amplitude calibration
!
endcat /

!
! standard catalogs ******************************************************
!
stafile = /users/cwalker/sched/catalogs/stations.dat
srcfile = /users/cwalker/sched/catalogs/sources.vlba
!
! schedule stuff *********************************************************
expt     = 'bb199b, cores of radio galaxies'
expcode  = 'bb199b'
version  = 1.0
piname   = 'Ilse van Bemmel'
address1 = '3700 San Martin Drive'
address2 = 'Baltimore MD21218'
address3 = 'USA'
phone    = '+1-410-338-4356'
obsphone = '+1-202-767-2977'
fax      = '+1-410-338-'
email    = 'bemmel@stsci.edu, hschmitt@ccs.nrl.navy.mil'
obsmode  = '128-4-2'
obstype  = 'VLBA'
note1    = '2 radio galaxies '
note2    = 'Amplitude Checks: J0019+2021'
note3    = 'phase ref sources from vlba survey'
correl   = 'socorro'
cornant  = 10
corchan  = 16
coravg   = 2
corpol   = 'off'
corsrcs  = 'SCHEDULE'
cortape  = 'dat'
corship1 = 'Ilse van Bemmel'
corship2 = 'STScI'
corship3 = '3700 San Martin Drive '
corship4 = 'Baltimore, MD21218 '
!
overwrit
sumitem = el1, el2, early, dwell
autotape= 2
!
LST     = 'VLBA_PT'
!
stations = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA,
           VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK

!
! day must be changed when program is run
!

year  = 2005
day   = 60135

start = 22:30:00


! ***** BEGIN ******

gap = 0 						! zero gap

! LST 22:30 start
! 1 radio galaxies at 6cm and 2cm
! cycle is 1:00-3:30 at 6cm and 0:50-1:30 at 2cm
! allocated 128 Mbit/s
!
setup = /users/cwalker/sched/setups/v2cm-128-4-2-L.set
source = 'J2340+2708' gap=0 dur = 50 /
group 2 repeat 4
source = '3C465' gap=0 dur = 1:30 /
source = 'J2340+2708' dur = 50 /
!
setup = /users/cwalker/sched/setups/v6cm-128-4-2-L.set
!
source = 'J2340+2708' gap=0 dur = 60 /
group 2 repeat 2
source = '3C465' gap=0 dur = 3:00 /
source = 'J2340+2708' dur = 60 /
setup = /users/cwalker/sched/setups/v2cm-128-4-2-L.set
source = 'J2340+2708' gap=0 dur = 50 /
group 2 repeat 4
source = '3C465' gap=0 dur = 1:30 /
source = 'J2340+2708' dur = 50 /
!
! 1st phase check at 2cm
!
source = 'J2340+2708' gap=0 dur = 50 /
source = 'J2340+2641' gap=0 dur = 1:30 /
source = 'J2340+2708' gap=0 dur = 50 /
!
!1st phase check at 6cm
!
setup = /users/cwalker/sched/setups/v6cm-128-4-2-L.set
source = 'J2340+2708' gap=0 dur = 60 /
source = 'J2340+2641' gap=0 dur = 2:00 /
source = 'J2340+2708' gap=0 dur = 60 /
setup = /users/cwalker/sched/setups/v2cm-128-4-2-L.set
!
source = 'J2340+2708' gap=0 dur = 50 /
group 2 repeat 4
source = '3C465' gap=0 dur = 1:30 /
source = 'J2340+2708' dur = 50 /
!
setup = /users/cwalker/sched/setups/v6cm-128-4-2-L.set
!
source = 'J2340+2708' gap=0 dur = 60 /
group 2 repeat 2
source = '3C465' gap=0 dur = 3:00 /
source = 'J2340+2708' dur = 60 /
setup = /users/cwalker/sched/setups/v2cm-128-4-2-L.set
source = 'J2340+2708' gap=0 dur = 50 /
group 2 repeat 4
source = '3C465' gap=0 dur = 1:30 /
source = 'J2340+2708' dur = 50 /
!
! amplitude check
!
source = 'J0019+2021'  gap=120 dur=4:00 /
setup = /users/cwalker/sched/setups/v6cm-128-4-2-L.set
source = 'J0019+2021'  gap=0 dur=4:00 /
!
setup = /users/cwalker/sched/setups/v2cm-128-4-2-L.set
source = 'J2340+2708' gap=0 dur = 90 /
group 2 repeat 4
source = '3C465' gap=0 dur = 1:30 /
source = 'J2340+2708' dur = 50 /
!
setup = /users/cwalker/sched/setups/v6cm-128-4-2-L.set
!
source = 'J2340+2708' gap=0 dur = 60 /
group 2 repeat 2
source = '3C465' gap=0 dur = 3:00 /
source = 'J2340+2708' dur = 60 /
setup = /users/cwalker/sched/setups/v2cm-128-4-2-L.set
source = 'J2340+2708' gap=0 dur = 50 /
group 2 repeat 4
source = '3C465' gap=0 dur = 1:30 /
source = 'J2340+2708' dur = 50 /
!
! fringe finder
!
source = 'J0237+2848' gap=0 dur = 4:00 /
setup = /users/cwalker/sched/setups/v6cm-128-4-2-L.set
source = 'J0237+2848' gap=0 dur = 4:00 /
!
setup = /users/cwalker/sched/setups/v2cm-128-4-2-L.set
source = 'J2340+2708' gap=0 dur = 90 /
group 2 repeat 4
source = '3C465' gap=0 dur = 1:30 /
source = 'J2340+2708' dur = 50 /
!
setup = /users/cwalker/sched/setups/v6cm-128-4-2-L.set
!
source = 'J2340+2708' gap=0 dur = 60 /
group 2 repeat 2
source = '3C465' gap=0 dur = 3:00 /
source = 'J2340+2708' dur = 60 /
setup = /users/cwalker/sched/setups/v2cm-128-4-2-L.set
source = 'J2340+2708' gap=0 dur = 50 /
group 2 repeat 4
source = '3C465' gap=0 dur = 1:30 /
source = 'J2340+2708' dur = 50 /
!
! end program 
!