From vdhawan@aoc.nrao.edu Tue Feb 19 14:39:22 2008 Date: Tue, 19 Feb 2008 14:38:44 -0700 From: Vivek Dhawan To: "vlbiobs >> \"VLBI Observers (Aspen only)\"" Subject: [Fwd: BR130 - key files] -------- Original Message -------- Subject: BR130 - key files Date: Thu, 14 Feb 2008 09:00:08 +0100 From: Eduardo Ros Organization: Max-Planck-Institut fuer Radioastronomie To: Scheduling Officer CC: vdhawan@nrao.edu, Matthias.Kadler@nrao.edu, cschang@mpifr-bonn.mpg.de, ykovalev@mpifr-bonn.mpg.de References: <200801021603.JAA28173@bclark.aoc.nrao.edu> Dear Sirs, please find enclosed the key files for experiment BR130, to be dynamically scheduled. Althoug I marked MK & SC as required, if any of these antennas should fail (as it was the case for SC), I give more priority to maintain the time sampling rather than to obtain the full resolution of the array. The multi-band coordination is in this concern more important. Please let me know if there are any problems with the schedule. It is the same as BR120. Best regards, Eduardo Ros MPIfR Staff Scientist On Fri, Jan 04, 2008 at 04:17:31PM -0700, Scheduling Officer wrote: > GENERAL: Your VLBA proposal has been approved for insertion into a > queue of programs to be selected dynamically for observation on the > VLBA. Details of the approval are given below, identical to those > recently sent to you with the referee reports on this proposal. For > information about how to prepare and submit your observe files, please > see http://www.aoc.nrao.edu/~schedsoc/dynamic-memo.shtml > > E-MAIL ADDRESS OF YOUR AOC TECHNICAL CONTACT PERSON: vdhawan@nrao.edu > > DETAILS: > > PROPOSAL CODE: BR130 > > PROPOSAL TITLE: NGC1052, the key to explore the disk jet connection in > AGN continution of the > > PROPOSAL STATUS ( 12/31/2007 ): Approved for dynamic scheduling, high > priority > > CURRENT TIME ALLOCATION: > 9 times 6.0 hrs dynamically scheduled centered at LST 2.5 > with 256 Mbits/sec recording > > *********************************************************************** > VLA/VLBA Scheduling Officers schedsoc@nrao.edu > NRAO, Socorro, New Mexico, USA http://www.aoc.nrao.edu/~schedsoc/ > *********************************************************************** [ Part 2: "Attached Text" ] ! ================================================================ ! Preferred Dynamic Constraints. Alter [defaults] as desired. ! ================================================================ ! Equipment constraints: ! Stations. Below each station code, the "o" indicates an ! [optional] station that is to be used if it is available. ! Change "o" to "r" if the station is required or change ! "o" to "n" if the station is not to be used. ! SC HN NL FD LA PT KP OV BR MK ! r o o o o o o o o r ! Minimum number of stations [9 (6 for 3mm)]: 9 ! May we swap PT for a single VLA antenna? NO ! Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html ! to decide. If you adopt the default, then both PT and ! VLA1 must be in the stations list in the keyin file. ! Bands and polarizations. Below each band code, insert "R" ! if the righthand polarization is to be used, "L" if the ! lefthand polarization is to be used, "d" if dual ! polarizations are to be used, or "o" if the band is in ! your setups but scheduling should not be constrained by ! its availability. ! 90cm 50cm 20cm 13cm 6cm 4cm 2cm 1cm 7mm 3mm ! L L ! ! Weather constraints: ! Please observe following the proposed frequency of one ! observation every six weeks. This is crucial for the ! scientific success of the experiment ! ! RECONSIDERED FROM: ! Good weather at least at the middle of the continental US, ! for a low-declination source observed with phase-ref at 1cm and 7mm. ! We are aware of the recommendation of having better weather ! by the scheduling committee, but we want to have high-quality ! data at 1cm and 7mm even at the price of a sparser time sampling of ! the radio source. ! ! Date constraints: ! Preferred date(s), usually a series start [none]: ! Excluded dates plus reason [none]: ! Preferred interval between segments in days: ! 40 days (6 weeks requested), important for densely sampled source ! monitoring ! Special conditions (e.g., a series with different ! spacings in time) [none]: ! ================================================================ version = 2 expt = 'NGC1052, the Key to Explore the Disk-Jet Connection in AGN' expcode = br130a piname = 'Eduardo Ros' address1 = 'Max-Planck-Institut fuer Radioastronomie' address2 = 'Auf dem Huegel 69' address3 = 'D-53121 Bonn' address4 = ' Germany ' phone = '+49-228-525292' obsphone = '+49-228-7667213' email = ros@mpifr-bonn.mpg.de fax = '+49-228-525229' obsmode = '13 & 7mm 256-8-2-L-UL ' obstype = VLBA note1 = ' ' ! correl = Socorro coravg = 2 corchan = 16 cornant = 10 corpol = off corwtfn = uniform corsrcs = standard cortape = DAT corship1 = 'Eduardo Ros' corship2 = 'MPIfR, Auf dem Huegel 69' corship3 = 'D-53121 Bonn, Germany' cornote1 = ' ' ! overwrit ! autotape = 2 ! minpause = 30 ! Minimum playback tape stop duration. ! prestart = 20 ! Start tapes this long before scan start. sumitem = el1, dwell, tape1, tpstart stafile = $SCHED/catalogs/stations.dat srcfile = $SCHED/catalogs/sources.vlba freqfile = $SCHED/catalogs/freq.dat ! ! setup = '$SCHED/setups/v13m-256-8-2-L-UL.set' ! stations= VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK ! pcal='1MHz' LST='VLBA_PT' day = 60180 start=23:50:00 ! Bring antennas to fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / ! Start nodding group=10 repeat=19 setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='NGC1052' dur=60 gap=08:50 / source='J0243-0550' dur=30 gap=0 / source='NGC1052' dwell=60 / source='J0243-0550' dwell=30 / source='NGC1052' dwell=60 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / ! Another fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / [ Part 3: "Attached Text" ] ! ================================================================ ! Preferred Dynamic Constraints. Alter [defaults] as desired. ! ================================================================ ! Equipment constraints: ! Stations. Below each station code, the "o" indicates an ! [optional] station that is to be used if it is available. ! Change "o" to "r" if the station is required or change ! "o" to "n" if the station is not to be used. ! SC HN NL FD LA PT KP OV BR MK ! r o o o o o o o o r ! Minimum number of stations [9 (6 for 3mm)]: 9 ! May we swap PT for a single VLA antenna? NO ! Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html ! to decide. If you adopt the default, then both PT and ! VLA1 must be in the stations list in the keyin file. ! Bands and polarizations. Below each band code, insert "R" ! if the righthand polarization is to be used, "L" if the ! lefthand polarization is to be used, "d" if dual ! polarizations are to be used, or "o" if the band is in ! your setups but scheduling should not be constrained by ! its availability. ! 90cm 50cm 20cm 13cm 6cm 4cm 2cm 1cm 7mm 3mm ! L L ! ! Weather constraints: ! Please observe following the proposed frequency of one ! observation every six weeks. This is crucial for the ! scientific success of the experiment ! ! RECONSIDERED FROM: ! Good weather at least at the middle of the continental US, ! for a low-declination source observed with phase-ref at 1cm and 7mm. ! We are aware of the recommendation of having better weather ! by the scheduling committee, but we want to have high-quality ! data at 1cm and 7mm even at the price of a sparser time sampling of ! the radio source. ! ! Date constraints: ! Preferred date(s), usually a series start [none]: ! Excluded dates plus reason [none]: ! Preferred interval between segments in days: ! 40 days (6 weeks requested), important for densely sampled source ! monitoring ! Special conditions (e.g., a series with different ! spacings in time) [none]: ! ================================================================ version = 2 expt = 'NGC1052, the Key to Explore the Disk-Jet Connection in AGN' expcode = br130b piname = 'Eduardo Ros' address1 = 'Max-Planck-Institut fuer Radioastronomie' address2 = 'Auf dem Huegel 69' address3 = 'D-53121 Bonn' address4 = ' Germany ' phone = '+49-228-525292' obsphone = '+49-228-7667213' email = ros@mpifr-bonn.mpg.de fax = '+49-228-525229' obsmode = '13 & 7mm 256-8-2-L-UL ' obstype = VLBA note1 = ' ' ! correl = Socorro coravg = 2 corchan = 16 cornant = 10 corpol = off corwtfn = uniform corsrcs = standard cortape = DAT corship1 = 'Eduardo Ros' corship2 = 'MPIfR, Auf dem Huegel 69' corship3 = 'D-53121 Bonn, Germany' cornote1 = ' ' ! overwrit ! autotape = 2 ! minpause = 30 ! Minimum playback tape stop duration. ! prestart = 20 ! Start tapes this long before scan start. sumitem = el1, dwell, tape1, tpstart stafile = $SCHED/catalogs/stations.dat srcfile = $SCHED/catalogs/sources.vlba freqfile = $SCHED/catalogs/freq.dat ! ! setup = '$SCHED/setups/v13m-256-8-2-L-UL.set' ! stations= VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK ! pcal='1MHz' LST='VLBA_PT' day = 60180 start=23:50:00 ! Bring antennas to fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / ! Start nodding group=10 repeat=19 setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='NGC1052' dur=60 gap=08:50 / source='J0243-0550' dur=30 gap=0 / source='NGC1052' dwell=60 / source='J0243-0550' dwell=30 / source='NGC1052' dwell=60 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / ! Another fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / [ Part 4: "Attached Text" ] ! ================================================================ ! Preferred Dynamic Constraints. Alter [defaults] as desired. ! ================================================================ ! Equipment constraints: ! Stations. Below each station code, the "o" indicates an ! [optional] station that is to be used if it is available. ! Change "o" to "r" if the station is required or change ! "o" to "n" if the station is not to be used. ! SC HN NL FD LA PT KP OV BR MK ! r o o o o o o o o r ! Minimum number of stations [9 (6 for 3mm)]: 9 ! May we swap PT for a single VLA antenna? NO ! Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html ! to decide. If you adopt the default, then both PT and ! VLA1 must be in the stations list in the keyin file. ! Bands and polarizations. Below each band code, insert "R" ! if the righthand polarization is to be used, "L" if the ! lefthand polarization is to be used, "d" if dual ! polarizations are to be used, or "o" if the band is in ! your setups but scheduling should not be constrained by ! its availability. ! 90cm 50cm 20cm 13cm 6cm 4cm 2cm 1cm 7mm 3mm ! L L ! ! Weather constraints: ! Please observe following the proposed frequency of one ! observation every six weeks. This is crucial for the ! scientific success of the experiment ! ! RECONSIDERED FROM: ! Good weather at least at the middle of the continental US, ! for a low-declination source observed with phase-ref at 1cm and 7mm. ! We are aware of the recommendation of having better weather ! by the scheduling committee, but we want to have high-quality ! data at 1cm and 7mm even at the price of a sparser time sampling of ! the radio source. ! ! Date constraints: ! Preferred date(s), usually a series start [none]: ! Excluded dates plus reason [none]: ! Preferred interval between segments in days: ! 40 days (6 weeks requested), important for densely sampled source ! monitoring ! Special conditions (e.g., a series with different ! spacings in time) [none]: ! ================================================================ version = 2 expt = 'NGC1052, the Key to Explore the Disk-Jet Connection in AGN' expcode = br130c piname = 'Eduardo Ros' address1 = 'Max-Planck-Institut fuer Radioastronomie' address2 = 'Auf dem Huegel 69' address3 = 'D-53121 Bonn' address4 = ' Germany ' phone = '+49-228-525292' obsphone = '+49-228-7667213' email = ros@mpifr-bonn.mpg.de fax = '+49-228-525229' obsmode = '13 & 7mm 256-8-2-L-UL ' obstype = VLBA note1 = ' ' ! correl = Socorro coravg = 2 corchan = 16 cornant = 10 corpol = off corwtfn = uniform corsrcs = standard cortape = DAT corship1 = 'Eduardo Ros' corship2 = 'MPIfR, Auf dem Huegel 69' corship3 = 'D-53121 Bonn, Germany' cornote1 = ' ' ! overwrit ! autotape = 2 ! minpause = 30 ! Minimum playback tape stop duration. ! prestart = 20 ! Start tapes this long before scan start. sumitem = el1, dwell, tape1, tpstart stafile = $SCHED/catalogs/stations.dat srcfile = $SCHED/catalogs/sources.vlba freqfile = $SCHED/catalogs/freq.dat ! ! setup = '$SCHED/setups/v13m-256-8-2-L-UL.set' ! stations= VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK ! pcal='1MHz' LST='VLBA_PT' day = 60180 start=23:50:00 ! Bring antennas to fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / ! Start nodding group=10 repeat=19 setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='NGC1052' dur=60 gap=08:50 / source='J0243-0550' dur=30 gap=0 / source='NGC1052' dwell=60 / source='J0243-0550' dwell=30 / source='NGC1052' dwell=60 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / ! Another fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / [ Part 5: "Attached Text" ] ! ================================================================ ! Preferred Dynamic Constraints. Alter [defaults] as desired. ! ================================================================ ! Equipment constraints: ! Stations. Below each station code, the "o" indicates an ! [optional] station that is to be used if it is available. ! Change "o" to "r" if the station is required or change ! "o" to "n" if the station is not to be used. ! SC HN NL FD LA PT KP OV BR MK ! r o o o o o o o o r ! Minimum number of stations [9 (6 for 3mm)]: 9 ! May we swap PT for a single VLA antenna? NO ! Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html ! to decide. If you adopt the default, then both PT and ! VLA1 must be in the stations list in the keyin file. ! Bands and polarizations. Below each band code, insert "R" ! if the righthand polarization is to be used, "L" if the ! lefthand polarization is to be used, "d" if dual ! polarizations are to be used, or "o" if the band is in ! your setups but scheduling should not be constrained by ! its availability. ! 90cm 50cm 20cm 13cm 6cm 4cm 2cm 1cm 7mm 3mm ! L L ! ! Weather constraints: ! Please observe following the proposed frequency of one ! observation every six weeks. This is crucial for the ! scientific success of the experiment ! ! RECONSIDERED FROM: ! Good weather at least at the middle of the continental US, ! for a low-declination source observed with phase-ref at 1cm and 7mm. ! We are aware of the recommendation of having better weather ! by the scheduling committee, but we want to have high-quality ! data at 1cm and 7mm even at the price of a sparser time sampling of ! the radio source. ! ! Date constraints: ! Preferred date(s), usually a series start [none]: ! Excluded dates plus reason [none]: ! Preferred interval between segments in days: ! 40 days (6 weeks requested), important for densely sampled source ! monitoring ! Special conditions (e.g., a series with different ! spacings in time) [none]: ! ================================================================ version = 2 expt = 'NGC1052, the Key to Explore the Disk-Jet Connection in AGN' expcode = br130d piname = 'Eduardo Ros' address1 = 'Max-Planck-Institut fuer Radioastronomie' address2 = 'Auf dem Huegel 69' address3 = 'D-53121 Bonn' address4 = ' Germany ' phone = '+49-228-525292' obsphone = '+49-228-7667213' email = ros@mpifr-bonn.mpg.de fax = '+49-228-525229' obsmode = '13 & 7mm 256-8-2-L-UL ' obstype = VLBA note1 = ' ' ! correl = Socorro coravg = 2 corchan = 16 cornant = 10 corpol = off corwtfn = uniform corsrcs = standard cortape = DAT corship1 = 'Eduardo Ros' corship2 = 'MPIfR, Auf dem Huegel 69' corship3 = 'D-53121 Bonn, Germany' cornote1 = ' ' ! overwrit ! autotape = 2 ! minpause = 30 ! Minimum playback tape stop duration. ! prestart = 20 ! Start tapes this long before scan start. sumitem = el1, dwell, tape1, tpstart stafile = $SCHED/catalogs/stations.dat srcfile = $SCHED/catalogs/sources.vlba freqfile = $SCHED/catalogs/freq.dat ! ! setup = '$SCHED/setups/v13m-256-8-2-L-UL.set' ! stations= VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK ! pcal='1MHz' LST='VLBA_PT' day = 60180 start=23:50:00 ! Bring antennas to fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / ! Start nodding group=10 repeat=19 setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='NGC1052' dur=60 gap=08:50 / source='J0243-0550' dur=30 gap=0 / source='NGC1052' dwell=60 / source='J0243-0550' dwell=30 / source='NGC1052' dwell=60 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / ! Another fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / [ Part 6: "Attached Text" ] ! ================================================================ ! Preferred Dynamic Constraints. Alter [defaults] as desired. ! ================================================================ ! Equipment constraints: ! Stations. Below each station code, the "o" indicates an ! [optional] station that is to be used if it is available. ! Change "o" to "r" if the station is required or change ! "o" to "n" if the station is not to be used. ! SC HN NL FD LA PT KP OV BR MK ! r o o o o o o o o r ! Minimum number of stations [9 (6 for 3mm)]: 9 ! May we swap PT for a single VLA antenna? NO ! Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html ! to decide. If you adopt the default, then both PT and ! VLA1 must be in the stations list in the keyin file. ! Bands and polarizations. Below each band code, insert "R" ! if the righthand polarization is to be used, "L" if the ! lefthand polarization is to be used, "d" if dual ! polarizations are to be used, or "o" if the band is in ! your setups but scheduling should not be constrained by ! its availability. ! 90cm 50cm 20cm 13cm 6cm 4cm 2cm 1cm 7mm 3mm ! L L ! ! Weather constraints: ! Please observe following the proposed frequency of one ! observation every six weeks. This is crucial for the ! scientific success of the experiment ! ! RECONSIDERED FROM: ! Good weather at least at the middle of the continental US, ! for a low-declination source observed with phase-ref at 1cm and 7mm. ! We are aware of the recommendation of having better weather ! by the scheduling committee, but we want to have high-quality ! data at 1cm and 7mm even at the price of a sparser time sampling of ! the radio source. ! ! Date constraints: ! Preferred date(s), usually a series start [none]: ! Excluded dates plus reason [none]: ! Preferred interval between segments in days: ! 40 days (6 weeks requested), important for densely sampled source ! monitoring ! Special conditions (e.g., a series with different ! spacings in time) [none]: ! ================================================================ version = 2 expt = 'NGC1052, the Key to Explore the Disk-Jet Connection in AGN' expcode = br130e piname = 'Eduardo Ros' address1 = 'Max-Planck-Institut fuer Radioastronomie' address2 = 'Auf dem Huegel 69' address3 = 'D-53121 Bonn' address4 = ' Germany ' phone = '+49-228-525292' obsphone = '+49-228-7667213' email = ros@mpifr-bonn.mpg.de fax = '+49-228-525229' obsmode = '13 & 7mm 256-8-2-L-UL ' obstype = VLBA note1 = ' ' ! correl = Socorro coravg = 2 corchan = 16 cornant = 10 corpol = off corwtfn = uniform corsrcs = standard cortape = DAT corship1 = 'Eduardo Ros' corship2 = 'MPIfR, Auf dem Huegel 69' corship3 = 'D-53121 Bonn, Germany' cornote1 = ' ' ! overwrit ! autotape = 2 ! minpause = 30 ! Minimum playback tape stop duration. ! prestart = 20 ! Start tapes this long before scan start. sumitem = el1, dwell, tape1, tpstart stafile = $SCHED/catalogs/stations.dat srcfile = $SCHED/catalogs/sources.vlba freqfile = $SCHED/catalogs/freq.dat ! ! setup = '$SCHED/setups/v13m-256-8-2-L-UL.set' ! stations= VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK ! pcal='1MHz' LST='VLBA_PT' day = 60180 start=23:50:00 ! Bring antennas to fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / ! Start nodding group=10 repeat=19 setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='NGC1052' dur=60 gap=08:50 / source='J0243-0550' dur=30 gap=0 / source='NGC1052' dwell=60 / source='J0243-0550' dwell=30 / source='NGC1052' dwell=60 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / ! Another fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / [ Part 7: "Attached Text" ] ! ================================================================ ! Preferred Dynamic Constraints. Alter [defaults] as desired. ! ================================================================ ! Equipment constraints: ! Stations. Below each station code, the "o" indicates an ! [optional] station that is to be used if it is available. ! Change "o" to "r" if the station is required or change ! "o" to "n" if the station is not to be used. ! SC HN NL FD LA PT KP OV BR MK ! r o o o o o o o o r ! Minimum number of stations [9 (6 for 3mm)]: 9 ! May we swap PT for a single VLA antenna? NO ! Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html ! to decide. If you adopt the default, then both PT and ! VLA1 must be in the stations list in the keyin file. ! Bands and polarizations. Below each band code, insert "R" ! if the righthand polarization is to be used, "L" if the ! lefthand polarization is to be used, "d" if dual ! polarizations are to be used, or "o" if the band is in ! your setups but scheduling should not be constrained by ! its availability. ! 90cm 50cm 20cm 13cm 6cm 4cm 2cm 1cm 7mm 3mm ! L L ! ! Weather constraints: ! Please observe following the proposed frequency of one ! observation every six weeks. This is crucial for the ! scientific success of the experiment ! ! RECONSIDERED FROM: ! Good weather at least at the middle of the continental US, ! for a low-declination source observed with phase-ref at 1cm and 7mm. ! We are aware of the recommendation of having better weather ! by the scheduling committee, but we want to have high-quality ! data at 1cm and 7mm even at the price of a sparser time sampling of ! the radio source. ! ! Date constraints: ! Preferred date(s), usually a series start [none]: ! Excluded dates plus reason [none]: ! Preferred interval between segments in days: ! 40 days (6 weeks requested), important for densely sampled source ! monitoring ! Special conditions (e.g., a series with different ! spacings in time) [none]: ! ================================================================ version = 2 expt = 'NGC1052, the Key to Explore the Disk-Jet Connection in AGN' expcode = br130f piname = 'Eduardo Ros' address1 = 'Max-Planck-Institut fuer Radioastronomie' address2 = 'Auf dem Huegel 69' address3 = 'D-53121 Bonn' address4 = ' Germany ' phone = '+49-228-525292' obsphone = '+49-228-7667213' email = ros@mpifr-bonn.mpg.de fax = '+49-228-525229' obsmode = '13 & 7mm 256-8-2-L-UL ' obstype = VLBA note1 = ' ' ! correl = Socorro coravg = 2 corchan = 16 cornant = 10 corpol = off corwtfn = uniform corsrcs = standard cortape = DAT corship1 = 'Eduardo Ros' corship2 = 'MPIfR, Auf dem Huegel 69' corship3 = 'D-53121 Bonn, Germany' cornote1 = ' ' ! overwrit ! autotape = 2 ! minpause = 30 ! Minimum playback tape stop duration. ! prestart = 20 ! Start tapes this long before scan start. sumitem = el1, dwell, tape1, tpstart stafile = $SCHED/catalogs/stations.dat srcfile = $SCHED/catalogs/sources.vlba freqfile = $SCHED/catalogs/freq.dat ! ! setup = '$SCHED/setups/v13m-256-8-2-L-UL.set' ! stations= VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK ! pcal='1MHz' LST='VLBA_PT' day = 60180 start=23:50:00 ! Bring antennas to fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / ! Start nodding group=10 repeat=19 setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='NGC1052' dur=60 gap=08:50 / source='J0243-0550' dur=30 gap=0 / source='NGC1052' dwell=60 / source='J0243-0550' dwell=30 / source='NGC1052' dwell=60 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / ! Another fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / [ Part 8: "Attached Text" ] ! ================================================================ ! Preferred Dynamic Constraints. Alter [defaults] as desired. ! ================================================================ ! Equipment constraints: ! Stations. Below each station code, the "o" indicates an ! [optional] station that is to be used if it is available. ! Change "o" to "r" if the station is required or change ! "o" to "n" if the station is not to be used. ! SC HN NL FD LA PT KP OV BR MK ! r o o o o o o o o r ! Minimum number of stations [9 (6 for 3mm)]: 9 ! May we swap PT for a single VLA antenna? NO ! Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html ! to decide. If you adopt the default, then both PT and ! VLA1 must be in the stations list in the keyin file. ! Bands and polarizations. Below each band code, insert "R" ! if the righthand polarization is to be used, "L" if the ! lefthand polarization is to be used, "d" if dual ! polarizations are to be used, or "o" if the band is in ! your setups but scheduling should not be constrained by ! its availability. ! 90cm 50cm 20cm 13cm 6cm 4cm 2cm 1cm 7mm 3mm ! L L ! ! Weather constraints: ! Please observe following the proposed frequency of one ! observation every six weeks. This is crucial for the ! scientific success of the experiment ! ! RECONSIDERED FROM: ! Good weather at least at the middle of the continental US, ! for a low-declination source observed with phase-ref at 1cm and 7mm. ! We are aware of the recommendation of having better weather ! by the scheduling committee, but we want to have high-quality ! data at 1cm and 7mm even at the price of a sparser time sampling of ! the radio source. ! ! Date constraints: ! Preferred date(s), usually a series start [none]: ! Excluded dates plus reason [none]: ! Preferred interval between segments in days: ! 40 days (6 weeks requested), important for densely sampled source ! monitoring ! Special conditions (e.g., a series with different ! spacings in time) [none]: ! ================================================================ version = 2 expt = 'NGC1052, the Key to Explore the Disk-Jet Connection in AGN' expcode = br130g piname = 'Eduardo Ros' address1 = 'Max-Planck-Institut fuer Radioastronomie' address2 = 'Auf dem Huegel 69' address3 = 'D-53121 Bonn' address4 = ' Germany ' phone = '+49-228-525292' obsphone = '+49-228-7667213' email = ros@mpifr-bonn.mpg.de fax = '+49-228-525229' obsmode = '13 & 7mm 256-8-2-L-UL ' obstype = VLBA note1 = ' ' ! correl = Socorro coravg = 2 corchan = 16 cornant = 10 corpol = off corwtfn = uniform corsrcs = standard cortape = DAT corship1 = 'Eduardo Ros' corship2 = 'MPIfR, Auf dem Huegel 69' corship3 = 'D-53121 Bonn, Germany' cornote1 = ' ' ! overwrit ! autotape = 2 ! minpause = 30 ! Minimum playback tape stop duration. ! prestart = 20 ! Start tapes this long before scan start. sumitem = el1, dwell, tape1, tpstart stafile = $SCHED/catalogs/stations.dat srcfile = $SCHED/catalogs/sources.vlba freqfile = $SCHED/catalogs/freq.dat ! ! setup = '$SCHED/setups/v13m-256-8-2-L-UL.set' ! stations= VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK ! pcal='1MHz' LST='VLBA_PT' day = 60180 start=23:50:00 ! Bring antennas to fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / ! Start nodding group=10 repeat=19 setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='NGC1052' dur=60 gap=08:50 / source='J0243-0550' dur=30 gap=0 / source='NGC1052' dwell=60 / source='J0243-0550' dwell=30 / source='NGC1052' dwell=60 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / ! Another fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / [ Part 9: "Attached Text" ] ! ================================================================ ! Preferred Dynamic Constraints. Alter [defaults] as desired. ! ================================================================ ! Equipment constraints: ! Stations. Below each station code, the "o" indicates an ! [optional] station that is to be used if it is available. ! Change "o" to "r" if the station is required or change ! "o" to "n" if the station is not to be used. ! SC HN NL FD LA PT KP OV BR MK ! r o o o o o o o o r ! Minimum number of stations [9 (6 for 3mm)]: 9 ! May we swap PT for a single VLA antenna? NO ! Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html ! to decide. If you adopt the default, then both PT and ! VLA1 must be in the stations list in the keyin file. ! Bands and polarizations. Below each band code, insert "R" ! if the righthand polarization is to be used, "L" if the ! lefthand polarization is to be used, "d" if dual ! polarizations are to be used, or "o" if the band is in ! your setups but scheduling should not be constrained by ! its availability. ! 90cm 50cm 20cm 13cm 6cm 4cm 2cm 1cm 7mm 3mm ! L L ! ! Weather constraints: ! Please observe following the proposed frequency of one ! observation every six weeks. This is crucial for the ! scientific success of the experiment ! ! RECONSIDERED FROM: ! Good weather at least at the middle of the continental US, ! for a low-declination source observed with phase-ref at 1cm and 7mm. ! We are aware of the recommendation of having better weather ! by the scheduling committee, but we want to have high-quality ! data at 1cm and 7mm even at the price of a sparser time sampling of ! the radio source. ! ! Date constraints: ! Preferred date(s), usually a series start [none]: ! Excluded dates plus reason [none]: ! Preferred interval between segments in days: ! 40 days (6 weeks requested), important for densely sampled source ! monitoring ! Special conditions (e.g., a series with different ! spacings in time) [none]: ! ================================================================ version = 2 expt = 'NGC1052, the Key to Explore the Disk-Jet Connection in AGN' expcode = br130h piname = 'Eduardo Ros' address1 = 'Max-Planck-Institut fuer Radioastronomie' address2 = 'Auf dem Huegel 69' address3 = 'D-53121 Bonn' address4 = ' Germany ' phone = '+49-228-525292' obsphone = '+49-228-7667213' email = ros@mpifr-bonn.mpg.de fax = '+49-228-525229' obsmode = '13 & 7mm 256-8-2-L-UL ' obstype = VLBA note1 = ' ' ! correl = Socorro coravg = 2 corchan = 16 cornant = 10 corpol = off corwtfn = uniform corsrcs = standard cortape = DAT corship1 = 'Eduardo Ros' corship2 = 'MPIfR, Auf dem Huegel 69' corship3 = 'D-53121 Bonn, Germany' cornote1 = ' ' ! overwrit ! autotape = 2 ! minpause = 30 ! Minimum playback tape stop duration. ! prestart = 20 ! Start tapes this long before scan start. sumitem = el1, dwell, tape1, tpstart stafile = $SCHED/catalogs/stations.dat srcfile = $SCHED/catalogs/sources.vlba freqfile = $SCHED/catalogs/freq.dat ! ! setup = '$SCHED/setups/v13m-256-8-2-L-UL.set' ! stations= VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK ! pcal='1MHz' LST='VLBA_PT' day = 60180 start=23:50:00 ! Bring antennas to fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / ! Start nodding group=10 repeat=19 setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='NGC1052' dur=60 gap=08:50 / source='J0243-0550' dur=30 gap=0 / source='NGC1052' dwell=60 / source='J0243-0550' dwell=30 / source='NGC1052' dwell=60 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / ! Another fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / [ Part 10: "Attached Text" ] ! ================================================================ ! Preferred Dynamic Constraints. Alter [defaults] as desired. ! ================================================================ ! Equipment constraints: ! Stations. Below each station code, the "o" indicates an ! [optional] station that is to be used if it is available. ! Change "o" to "r" if the station is required or change ! "o" to "n" if the station is not to be used. ! SC HN NL FD LA PT KP OV BR MK ! r o o o o o o o o r ! Minimum number of stations [9 (6 for 3mm)]: 9 ! May we swap PT for a single VLA antenna? NO ! Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html ! to decide. If you adopt the default, then both PT and ! VLA1 must be in the stations list in the keyin file. ! Bands and polarizations. Below each band code, insert "R" ! if the righthand polarization is to be used, "L" if the ! lefthand polarization is to be used, "d" if dual ! polarizations are to be used, or "o" if the band is in ! your setups but scheduling should not be constrained by ! its availability. ! 90cm 50cm 20cm 13cm 6cm 4cm 2cm 1cm 7mm 3mm ! L L ! ! Weather constraints: ! Please observe following the proposed frequency of one ! observation every six weeks. This is crucial for the ! scientific success of the experiment ! ! RECONSIDERED FROM: ! Good weather at least at the middle of the continental US, ! for a low-declination source observed with phase-ref at 1cm and 7mm. ! We are aware of the recommendation of having better weather ! by the scheduling committee, but we want to have high-quality ! data at 1cm and 7mm even at the price of a sparser time sampling of ! the radio source. ! ! Date constraints: ! Preferred date(s), usually a series start [none]: ! Excluded dates plus reason [none]: ! Preferred interval between segments in days: ! 40 days (6 weeks requested), important for densely sampled source ! monitoring ! Special conditions (e.g., a series with different ! spacings in time) [none]: ! ================================================================ version = 2 expt = 'NGC1052, the Key to Explore the Disk-Jet Connection in AGN' expcode = br130i piname = 'Eduardo Ros' address1 = 'Max-Planck-Institut fuer Radioastronomie' address2 = 'Auf dem Huegel 69' address3 = 'D-53121 Bonn' address4 = ' Germany ' phone = '+49-228-525292' obsphone = '+49-228-7667213' email = ros@mpifr-bonn.mpg.de fax = '+49-228-525229' obsmode = '13 & 7mm 256-8-2-L-UL ' obstype = VLBA note1 = ' ' ! correl = Socorro coravg = 2 corchan = 16 cornant = 10 corpol = off corwtfn = uniform corsrcs = standard cortape = DAT corship1 = 'Eduardo Ros' corship2 = 'MPIfR, Auf dem Huegel 69' corship3 = 'D-53121 Bonn, Germany' cornote1 = ' ' ! overwrit ! autotape = 2 ! minpause = 30 ! Minimum playback tape stop duration. ! prestart = 20 ! Start tapes this long before scan start. sumitem = el1, dwell, tape1, tpstart stafile = $SCHED/catalogs/stations.dat srcfile = $SCHED/catalogs/sources.vlba freqfile = $SCHED/catalogs/freq.dat ! ! setup = '$SCHED/setups/v13m-256-8-2-L-UL.set' ! stations= VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK ! pcal='1MHz' LST='VLBA_PT' day = 60180 start=23:50:00 ! Bring antennas to fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='IIIZW2' dwell = 05:00 / ! Start nodding group=10 repeat=19 setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='NGC1052' dur=60 gap=08:50 / source='J0243-0550' dur=30 gap=0 / source='NGC1052' dwell=60 / source='J0243-0550' dwell=30 / source='NGC1052' dwell=60 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / source='J0243-0550' dwell=25 / source='NGC1052' dwell=50 / ! Another fringe finder setup = '$SCHED/setups/v1cm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 / setup = '$SCHED/setups/v7mm-256-8-2-L-UL.set' source='0420-014' dwell = 05:00 /