! =========================================================
!
!   ver2: added VLA1 frequency setups at 2 and 6 cm bands
!         after consulting with Leonia Kogan (2007 Nov 02)
!   ver1: created by ZQS on 2007 Oct 29
!     
!      SCHED command file for VLBA+Y1 Experiment BS175
!             	
!   (BS175 runs four separate nights, i.e. on Nov 9/10,10/11,
!    11/12, 12/13, 1830-0130 UT, at 512Mbit/sec)
!
!   (VLBA plus a single VLA antenna)
!   
! ==========================================================
! =================  Cover Information  ====================
! ==========================================================
overwrite
autotape=2
sumitem = EL1, DWELL
!
VERSION  = 1.0
EXPT     = 'TY006C: VLBA+Y1 Test'
EXPCODE  = TY006C
OBSTYPE  = VLBA    ! (VLBA+Y1)
PINAME   = 'Amy Mioduszewski'
ADDRESS1 = 'NRAO'
ADDRESS2 = 'Socorro, NM 87801'
PHONE    = '(505) 835 7263 (work); (505) 838 0393 (home)'
OBSPHONE = '(505) 835 7263'
FAX      = '(505) 835 7027'
EMAIL    = 'amiodusz@nrao.edu'
OBSMODE  = 'VLBA+Y1 dual pol at 1.3 & 6 cm with 512-8-2'
CORREL   = 'Socorro'  
NOTE1    = '1.3 & 6 cm portion'

! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================

correl   = 'Socorro'
coravg   = 1.0
corchan  = 128
cornant  = 10
corpol   = 'on'
corwtfn  = 'uniform'
corsrcs  = 'standard'
cornote1 = '1 correlation pass'
cornote2 = 'pass1: corchan=128, all IFs (512Mbps)'
cornote2 = 'Correlate with 3 antennas (Y1 and 2 others)'
cortape  = ftp
corship1 = 'Amy Mioduszewski'
corship2 = 'P. O. Box O'
corship3 = 'Socorro NM 87801'

! ==========================================================
! ===================  Station Catalogue ===================
! ==========================================================

stafile = $SCHED/catalogs/stations.dat

! ==========================================================
! =================== Setup Information ====================
! ==========================================================

setinit = v6cm.set /
!============================================================
! Standard setup file: v6cm-512-8-2.set                        
!     (Produced by MAKESETUP)
!      For the 6 cm band.
!        Radio Astronomy allocation: 4990-5000
!        Radio Astnomomy footnote:   4950-4990
!        VLA 50MHz 4960.1 to 5010.1 with VC mode.
!        VLA 6cm receiver falling off at high end.
!      Reference frequency is Mark II network standard
!      Merlin 4986-5002

!     Format      Tape length  Density  Tape speed  Time/pass
! VLBA/MkIII/MkIV    17600      High     160.00        22:00
!    MkIII/MkIV       8800      Low      270.00         6:31
!      512 Mbps - 1 pass/headpos - 2 tapes (VLBA) or 2 heads (Mark IV)
  nchan    = 8
  bits     = 2
  bbfilter = 16.0
  freqref  =   4977.99 ! to meet VLA receiver at high end ~ 5010.00
  freqoff  =  -32.50, -32.50, -16.50, -16.50,  -0.50,  -0.50,  15.50,  15.50
  netside  =  U, U, U, U, U, U, U, U
  pol      = dual
  station  = VLBA /
!
station = 'vla1'
   ifchan  = A, C, A, C, B, D, B, D
   firstlo = 4339.90, 4339.90, 4339.90, 4339.90, 4360.1, 4360.1, 4360.1, 4360.1
   vlaband = VC    vlafeab = 0.00  vlasyna = 3939.9  flukea = 100.0
   vlabw = '0000'  vlafecd = 0.00  vlasynb = 3960.1  flukeb = 200.0
   fefilter = '0000'
   barrel='roll_off'  pcal='1MHz' format=VLBA1:4 /
!============================================================
endset / 

setinit = v1cm.set /
!============================================================
! Standard setup file: v1cm-512-8-2.set                        
!     (Produced by MAKESETUP)
!      For the 1 cm band.
!        Radio Astronomy allocation: 22210-22500
!      Reference frequency is Mark II network standard

!     Format      Tape length  Density  Tape speed  Time/pass
! VLBA/MkIII/MkIV    17600      High     160.00        22:00
!    MkIII/MkIV       8800      Low      270.00         6:31
!      512 Mbps - 1 pass/headpos - 2 tapes (VLBA) or 2 heads (Mark IV)
  nchan    = 8
  bits     = 2
  bbfilter = 16.0
  freqref  =  22228.99
  freqoff  =  -32.50, -32.50, -16.50, -16.50,  -0.50,  -0.50,  15.50,  15.50
  netside  =  U, U, U, U, U, U, U, U
  pol      = dual
  station  = VLBA /
!
station = 'vla1'
   ifchan  = A, C, A, C, B, D, B, D
   firstlo = 21589.90, 21589.90, 21589.90, 21589.90, 21610.1, 21610.1, 21610.1, 21610.1
   vlaband = VK    vlafeab = 17.5  vlasyna = 3689.9  flukea = 100.0
   vlabw = '0000'  vlafecd = 17.5  vlasynb = 3710.1  flukeb = 200.0
   fefilter = '0000'
   barrel='roll_off'  pcal='1MHz' format=VLBA1:4  /
!============================================================
endset / 

! ==========================================================
! =================  Initial Scan Information  =============
! ==========================================================
! Scheduled project time is from 18:30:00 to 01:30:00 UT

!LST = 'VLBA_PT' 

year  = 2007
month = 12
day = 05
start = 14:30:00       !! UT start time

stations = vlba_kp, vlba_pt, vlba_la, vlba_fd, vla1

vlamode  = vs

!============================================================

! ==========================================================
! ======================   The Scans  ======================
!6cm follows  
setup  = v6cm.set
SOURCE = 'J0555+3948' DUR = 00:02:00  PRESCAN=00:00:00   RECORD  / !
! block 6
GROUP 2 REPEAT 4
SOURCE = 'J0605+4030' DUR = 00:02:00  PRESCAN=00:00:00     / !
SOURCE = 'J0555+3948' DUR = 00:02:00  PRESCAN=00:00:00     / !
setup  = v1cm.set
GROUP 2 REPEAT 4
SOURCE = 'J0605+4030' DUR = 00:02:00  PRESCAN=00:00:00     / !
SOURCE = 'J0555+3948' DUR = 00:02:00  PRESCAN=00:00:00     / !
setup='$SCHED/setups/v6cm-256-8-2.set'
GROUP 2 REPEAT 4
SOURCE = 'J0605+4030' DUR = 00:02:00  PRESCAN=00:00:00     / !
SOURCE = 'J0555+3948' DUR = 00:02:00  PRESCAN=00:00:00     / !