! file bf087.key

! ================================================================
!   Preferred Dynamic Constraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           o   o   o   o   o   o   o   o   o   o
!       Minimum number of stations [9 (6 for 3mm)]:
!       May we swap PT for a single VLA antenna? [yes]
!          Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html
!          to decide.  If you adopt the default, then both PT and
!          VLA1 must be in the stations list in the keyin file.
!    Bands and polarizations.  Below each band code, insert "R" 
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual 
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!           90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!	     d
! Weather constraints:
!    [appropriate for bands marked "L", "R", or "d" above
!     and for at least the minimum number of stations]
! Date constraints:
!    Preferred date(s), usually a series start [none]:
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days [none]:
!    Special conditions (e.g., a series with different
!       spacings in time) [none]:
! ================================================================
!
!
!
!
EXPT     = 'BF087 Observations of compact sources in M82 at 327MHz'
EXPCODE  = 'BF087'
VERSION  = 1.1
PINAME   = 'Danielle Fenech'
ADDRESS1 = 'Jodrell Bank Observatory'
ADDRESS2 = 'Macclesfield'
ADDRESS3 = 'Cheshire, England'
PHONE    = '(+44) 1477 572657'
OBSPHONE = '(+44) 1477 571321'
FAX      = '(+44) 1477 571618'
EMAIL    = 'dfenech@jb.man.ac.uk'
OBSMODE  = '90cm 128-1-2'
OBSTYPE  = 'VLBA'
NOTE1    = ''
NOTE2    = ''
NOTE3    = ''

! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================

correl   = 'Socorro'
cornant  = 10
corchan  = 128
coravg   = 2
corpol   = 'off'
corwtfn  = 'uniform'
corsrcs  = 'Schedule & See the PI'
cortape  = 'dat'
corship1 = 'D. Fenech'
corship2 = 'Jodrell Bank Observatory'
corship3 = 'Lower Withington, Macclesfield, Cheshire, SK11 9DL'
cornote1 = 'WARNING: This is to be correlated in 2 passes, one'
cornote2 = 'centred on M82, the other on B0955+697.'
cornote3 = 'M82 09:55:50.694 +69:40:43.690'
cornote4 = '0955+697 09:59:10.6394 +69:32:17.724'
!
overwrit
dovex
autotape = 2

!-------------------------------------------------------------------
! ********************** Source Positions *************************
!-------------------------------------------------------------------

srcfile  = $SCHED/catalogs/sources.vlba
stafile  = $SCHED/catalogs/stations.dat
freqfile = $SCHED/catalogs/freq.dat

SRCCAT /

! Telescope Pointing Position
SOURCE = 'M82MID' RA=09:57:30.667  DEC=69:36:30.707 
CALCODE='' EQUINOX='J2000' / 

ENDCAT /


! ===========================================================
! =======================  Setup file  =====================
! ==========================================================


setini = egvlba.90cm /
  band   = '90cm'    !  Observing band.  SCHED had frequency.
  nchan  = 8        !  Number of baseband channels.
  bbfilt = 4.0      !  Bandwidth per baseband channel (MHz)
  pol    = dual     !  RCP, LCP, or DUAL.
  format = vlba
  bits   = 2        !  Bits per sample
  /          !   Note:  Total bit rate = 2*bbfilt*nchan*bits
endset /


setup = egvlba.90cm

lst      = VLBA_PT
! day      = 58000    !  local sidereal day
!year     = 2005  month = 12  
day = 60426
start    = 01:00:00


! PCAL off - only adds noise:

PCAL='off'

AUTOTAPE=2

STATIONS = VLBA_HN, VLBA_FD, VLBA_NL, VLBA_LA, VLBA_PT, VLBA_KP, 
	   VLBA_BR, VLBA_OV, VLBA_MK, VLBA_SC


group 2 rep 1
	source='M82MID'  gap=0:00 dur=30:00  /
	source='2007+777' gap=04:36 dur=14:00  /

group 2 rep 5
	source='M82MID'	gap=2:00 dur=44:00 /
	source='M82MID'	gap=0:00 dur=44:00 /

group 2 rep 1
	source='2007+777' gap=04:36 dur=20:00 /
	source='M82MID' gap=04:36 dur=24:00/
	
group 2 rep 5
	source='M82MID'	gap=2:00 dur=44:00 /
	source='M82MID'	gap=0:00 dur=44:00 /

group 2 rep 1
	source='2007+777' gap=04:36 dur=20:00  /
	source='M82MID'  gap=04:36 dur=24:00  /

group 1 rep 1
	source='M82MID'  gap=0:00 dur=28:00  /