! File for W3 - 1665, 1667 OH expt
! file is for 1-hour blocks +/- 7 hours around 02 30 LST-Pietown. 
! Trim off ends as appropriate.
overwrit
version = 1
expt     = 'TG003 '
expcode  = 'TG003'
piname   = 'Palmer/Goss'
address1 = 'P.O. Box O'
address2 = ''
address3 = ''
phone    = '773-702-7972'
obsphone = '773-955-2223'
fax      = '773-702-8212'
email    = 'ppalmer@nrao.edu'
obsmode  = '18cm spectral line observations'
obstype  = 'VLBA'
!note1    = 'P.Palmer is responsible for setup, afterward M. Goss.'
!
! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================
 
correl   = 'Socorro'
coravg   = 5
corchan  = 512
cornant  = 8
corpol   = 'off'
corwtfn  = 'uniform'
corsrcs  = 'Schedule'
cortape  = DAT
corship1 = 'M. Goss'
corship2 = 'P. O. Box O'
corship3 = 'Socorro NM 87801'
!
! ==========================================================
! ==================  Program control  =====================
! ==========================================================
!
!    Normally SCHED will not overwrite preexisting files.  If
!    you do not want this protection, uncomment the following line:
 overwrit
!
!    Most projects on the VLBA use automatic tape allocation.
  autotape = 2
! ==========================================================
! ==============  Spectral line rest frequecies  ===========
! ==========================================================
!
lineinit /
lineset='mainoh'  restfreq= 1665.4018, 1665.4018, 1667.3590, 1667.3590 /
endlines /
!
setinit = w3_main.set  /
  ! setup for file w3_main.key
  ! Actual frequencies to be set by DOPPLER.
  ! This setup file calls for dual circular polarizations,
  ! .47 Mbps(?), 4 baseband channels, 2-bit sampling, and baseband
  ! filter bandwidths of 0.25MHz.  Oversampling is requested as 
  ! SCHED will note while processing.
  !
  nchan = 4  samprate = 4.0  bits = 2  bbfilter = 0.25   ! .47 Mbps (?) 
  netside  = U, U,U,U
  bbc      = 1, 2,3,4
  pol  = RCP, LCP, RCP, LCP
  pcal     = 'off'   ! Don't wany pcal spikes in spectra.
  freqref = 1665, 1665, 1667, 1667
  freqoff = 0,0 /
endset /
! ==========================================================
! ====================  Source Catalog  ====================
! ==========================================================
!
srccat /
  source= 'W3(OH)' ra=02:23:16.40 dec=61:38:57.30 epoch='B1950'
      vel =-45.0, -45.0,-45.0, -45.0 /
endcat /
!
! ==========================================================
! =================  Initial Scan Information  =============
! ==========================================================
!
stations = VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA,
           VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR
linename = 'mainoh'   
doppler
bw = 0.25,0.25,0.25,0.25
obstyp='vlba'
setup    = 'w3_main.set'
! vlamode=vs
LST=VLBA_PT
day= 60062
start  = 19:30:00
!

! ==========================================================
! ========================  The Scans  =====================
! ==========================================================
group 2 repeat 12
source 'w3(oh)' dur=00:02:00 dopsrc 'w3(oh)' /
source '0224+671' dur=00:03:00 dopsrc 'w3(oh)' /
group 1 repeat 1 
source '3C454.3' gap=00:02:00 dur=00:03:00 dopsrc 'w3(oh)' /
group 2 repeat 11
source 'w3(oh)' gap=00:00:00 dur=00:02:00 dopsrc 'w3(oh)' /
source '0224+671' dur=00:03:00 dopsrc 'w3(oh)' /
source '3C454.3' gap=00:02:00 dur=00:03:00 dopsrc 'w3(oh)' /
group 2 repeat 11
source 'w3(oh)' gap=00:00:00 dur=00:02:00 dopsrc 'w3(oh)' /
source '0224+671' dur=00:03:00 dopsrc 'w3(oh)' /
source '3C454.3' gap=00:02:00 dur=00:03:00 dopsrc 'w3(oh)' /
group 2 repeat 11
source 'w3(oh)' gap=00:00:00 dur=00:02:00 dopsrc 'w3(oh)' /
source '0224+671' dur=00:03:00 dopsrc 'w3(oh)' /
source '3C454.3' gap=00:02:00 dur=00:03:00 dopsrc 'w3(oh)' /
group 2 repeat 11
source 'w3(oh)' gap=00:00:00 dur=00:02:00 dopsrc 'w3(oh)' /
source '0224+671' dur=00:03:00 dopsrc 'w3(oh)' /
source '3C454.3' gap=00:02:00 dur=00:03:00 dopsrc 'w3(oh)' /
group 2 repeat 11
source 'w3(oh)' gap=00:00:00 dur=00:02:00 dopsrc 'w3(oh)' /
source '0224+671' dur=00:03:00 dopsrc 'w3(oh)' /
source '3C454.3' gap=00:02:00 dur=00:03:00 dopsrc 'w3(oh)' /
group 2 repeat 11
source 'w3(oh)' gap=00:00:00 dur=00:02:00 dopsrc 'w3(oh)' /
source '0224+671' dur=00:03:00 dopsrc 'w3(oh)' /
source 'da193' gap=00:02:00 dur=00:03:00 dopsrc 'w3(oh)' /
group 2 repeat 11
source 'w3(oh)' gap=00:00:00 dur=00:02:00 dopsrc 'w3(oh)' /
source '0224+671' dur=00:03:00 dopsrc 'w3(oh)' /
source 'da193' gap=00:02:00 dur=00:03:00 dopsrc 'w3(oh)' /
group 2 repeat 11
source 'w3(oh)' gap=00:00:00 dur=00:02:00 dopsrc 'w3(oh)' /
source '0224+671' dur=00:03:00 dopsrc 'w3(oh)' /
source 'da193' gap=00:02:00 dur=00:03:00 dopsrc 'w3(oh)' /
group 2 repeat 11
source 'w3(oh)' gap=00:00:00 dur=00:02:00 dopsrc 'w3(oh)' /
source '0224+671' dur=00:03:00 dopsrc 'w3(oh)' /
source 'da193' gap=00:02:00 dur=00:03:00 dopsrc 'w3(oh)' /
group 2 repeat 11
source 'w3(oh)' gap=00:00:00 dur=00:02:00 dopsrc 'w3(oh)' /
source '0224+671' dur=00:03:00 dopsrc 'w3(oh)' /
source 'da193' gap=00:02:00 dur=00:03:00 dopsrc 'w3(oh)' /
group 2 repeat 11
source 'w3(oh)' gap=00:00:00 dur=00:02:00 dopsrc 'w3(oh)' /
source '0224+671' dur=00:03:00 dopsrc 'w3(oh)' /
source 'da193' gap=00:02:00 dur=00:03:00 dopsrc 'w3(oh)' /
group 2 repeat 11
source 'w3(oh)' gap=00:00:00 dur=00:02:00 dopsrc 'w3(oh)' /
source '0224+671' dur=00:03:00 dopsrc 'w3(oh)' /
source 'da193' gap=00:02:00 dur=00:03:00 dopsrc 'w3(oh)' /
group 2 repeat 11
source 'w3(oh)' gap=00:00:00 dur=00:02:00 dopsrc 'w3(oh)' /
source '0224+671' dur=00:03:00 dopsrc 'w3(oh)' /
source 'da193' gap=00:02:00 dur=00:03:00 dopsrc 'w3(oh)' /
!
! end w3_main.key