! Must have $SCHED variable set
! ************************************************************************
!
!          SCHED command file for dynamic scheduling of 
!          VLBA Experiment BL104
!
!          Experiment uses 1 thin tape at VLBA   
!          Three different frequencies of observation 2cm, 1cm, 7mm
! ------------------------------------------------------------------------
! Notes:   1. Minimum acceptable number of antennae  -- 7. 
!          2. Least critical antennae: MK, SC.
!          3. Weather requirements: good or fair conditions for 22GHz.
!          4. Regular time sampling is a crucial condition. 
!             Observations need to be scheduled as close as possible
!             to the requested mode of one observation per month.
!          5. The maximum duration = 4 hrs. Core block duration =  3 hrs.
!             The Core Block is marked in the schedule. The additional
!             scans cover two 30 minute intervals immediately before and 
!             after the Core Block.
!
! ************************************************************************
!
overwrit


! tape initialization stuff **********************************************
tapeini /
obscode ='default'
tpsta   ='vlba', 'vla1', 'vla27', 'eb_vlba', 'gb_vlba', 'default'
tpdrive =1,      1,      1,       1,         1,         1
tpindex =1,      1,      1,       1,         1,         1
tplength=17600,  17600,  17600,   17600,     17600,     8800
ndrives =2,      2,      2,       1,         1,         1
nheadpos=14,     14,     14,      14,        14,        14
density =H,      H,      H,       H,         H,         L 
        /
 
! standard catalogs ******************************************************
! Uncomment the following 2 lines, if running this schedule at the AOC
!srcfile  = /home/arana/cwalker/sched/catalogs/sources.vlba
!stafile  = /home/arana/cwalker/sched/catalogs/stations.dat
!
! Will not specify the station information manually. 
! Use Dave Graham's version of stations.dat instead:
! Comment out the following 2 lines, if running this schedule at the AOC
srcfile = $SCHED/catalogs/sources.vlba 
stafile = $SCHED/catalogs/stations.dat
!
!
! Project information  ***************************************************
!
expt     = '3C345 -- 15, 22, 43GHz: core flux density monitoring'
expcode  = 'BL104H'
version  = 1
piname   = 'Andrei Lobanov'
address1 = 'MPIfR'
address2 = 'Auf dem Hugel 69'
address3 = 'D-53121 Bonn, GERMANY'
fax      = '+49 228 525 295'
phone    = '+49 228 525 229'
obsphone = '+49 228 525 295'
email    = 'internet: alobanov@mpifr-bonn.mpg.de'
obsmode  = 'VLBA'
obstype  = 'VLBA'
note1    = '1. Target/fringe finder 3C345. Amplitude check J1638+5720.'
note2    = '2. Minimum antenna number = 7. Least critical antennae: MK, SC.'
note3    = '3. Weather conditions: good or fair for 22GHz. 
note4    = '4. Time sampling (crucial): please observe once per month.'
!
!Correlator information *************************************************
correl   = 'socorro'
coravg   = 2
corchan  = 16
cornant  = 10
corpol   = 'on'
corsrcs  = 'STANDARD'
corship1 = 'Andrei Lobanov
corship2 = 'MPIfR, Auf dem Huegel 69'
corship3 = 'D-53121 Bonn'
corship4 = 'GERMANY'
cortape  = 'DAT'
corwtfn  = 'UNIFORM'
!
!
! Begin schedule ********************************************************
!
autotape=2
LST=VLBA_PT

! Arbitrary date. Change as required.
!YEAR  = 2001 
DAY =59353
!MONTH = 06  DAY   = 01

! 'VLBA' will make vlba files.
dosta 'VLBA'
STATIONS = VLBA_FD,VLBA_HN,VLBA_NL,VLBA_OV,VLBA_PT,VLBA_BR,VLBA_KP,
     VLBA_MK,VLBA_SC,VLBA_LA

! Duration: Maximum =  4 hours; Core Block = 3 hours
! Start time LST=14:30 (at VLBA_PT)
START=14:30:00

SETUP = '$SCHED/setups/

! ----------------------------------------------------------------------------
! Extended Block begins
!
SOURCE='3C345'   DUR=4:00 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / 
SOURCE='3C345'   DUR=4:00 SETUP = '$SCHED/setups/v1cm-128-8-1.set' /
SOURCE='3C345'   DUR=4:00 SETUP = '$SCHED/setups/v7mm-128-8-1.set' /

SOURCE='J1638+5720'   GAP= 2:15 DUR=4:00 SETUP = '$SCHED/setups/v2cm-128-8-1.set' /
SOURCE='J1638+5720'   GAP= 0:00 DUR=4:00 SETUP = '$SCHED/setups/v1cm-128-8-1.set' /
SOURCE='J1638+5720'   GAP= 0:00 DUR=4:30 SETUP = '$SCHED/setups/v7mm-128-8-1.set' /
!
! Extended Block ends
! ----------------------------------------------------------------------------


! ----------------------------------------------------------------------------
! Core Block begins
!
GROUP=3 REPEAT=4
SOURCE='3C345'   GAP = 2:15 DUR=7:00 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / 
SOURCE='3C345'   GAP = 0:00 DUR=7:00 SETUP = '$SCHED/setups/v1cm-128-8-1.set' /
SOURCE='3C345'   DUR=7:00 SETUP = '$SCHED/setups/v7mm-128-8-1.set' /

SOURCE='J1638+5720'   GAP= 2:15 DUR=7:00 SETUP = '$SCHED/setups/v2cm-128-8-1.set' /
SOURCE='J1638+5720'   GAP= 0:00 DUR=7:00 SETUP = '$SCHED/setups/v1cm-128-8-1.set' /
SOURCE='J1638+5720'   GAP= 0:00 DUR=7:00 SETUP = '$SCHED/setups/v7mm-128-8-1.set' /

SOURCE='3C345'   GAP= 2:15 DUR=7:00 SETUP = '$SCHED/setups/v2cm-128-8-1.set' /
SOURCE='3C345'   GAP= 0:00 DUR=7:00 SETUP = '$SCHED/setups/v1cm-128-8-1.set' /
SOURCE='3C345'   GAP= 0:00 DUR=7:00 SETUP = '$SCHED/setups/v7mm-128-8-1.set' /

GROUP=3 REPEAT=2
SOURCE='3C345'   DUR=7:00 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / 
SOURCE='3C345'   DUR=7:00 SETUP = '$SCHED/setups/v1cm-128-8-1.set' /
SOURCE='3C345'   DUR=7:00 SETUP = '$SCHED/setups/v7mm-128-8-1.set' /
!
! Core Block ends
! ----------------------------------------------------------------------------


! ----------------------------------------------------------------------------
! Extended Block begins
! 
GROUP=3 REPEAT=2
SOURCE='3C345'   DUR=5:00 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / 
SOURCE='3C345'   DUR=5:00 SETUP = '$SCHED/setups/v1cm-128-8-1.set' /
SOURCE='3C345'   DUR=5:00 SETUP = '$SCHED/setups/v7mm-128-8-1.set' /
!
! Extended Block ends
! ----------------------------------------------------------------------------


! End schedule