!  Example sched input for a simple VLBA observation using
!  some Mark 5 units.  This is egvlba.key with disk at HN.
!
! ==========================================================
! =================  Cover Information  ====================
! ==========================================================
!
 version = 1
 expt    = 'VLBA correlator gate test for 126, 268 and 512 modes'
 expcode = tf030

 piname   = 'Walter Brisken'    
 address1 = 'National Radio Astronomy Observatory'  
 address2 = 'P. O. Box O'                           
 address3 = 'Socorro, New Mexico, 87801'
 address4 = ' U.S.A. '
 phone    = '505 835 7133'    
 obsphone = '505 835 7133'     
 email    = wbrisken@nrao.edu  
 fax      = '505 835 7027 '   
 obsmode  = '6cm 128-4-2 '
 obstype  = VLBA
 note1    = ''

!  Dynamic constraints:
!
!  Can run anytime between 20 and 8 LST.  At least 4 antennas are needed.



! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================
 
correl   = Socorro
coravg   = 4
corchan  = 16
cornant  = 1
corpol   = on
corwtfn  = uniform
corsrcs  = standard
cortape  = DAT
corship1 = 'Walter Brisken'
corship2 = 'P. O. Box O'
corship3 = 'Socorro NM 87801'

overwrit


minpause = 5     ! Minimum playback tape stop duration.
prestart = 3     ! Start tapes this long before scan start.
sumitem  = el1, az1, tape1, tpstart   


! modes to be tested

! 1
setini = L128-2-2.set /
  MODETEST
  band='18cm'  pol=dual  bbfilter=16 nchan=2    bits=2 /
endset /

! 2
setini = L128-4-1.set /
  MODETEST
  band='18cm'  pol=dual  bbfilter=16 nchan=4    bits=1 /
endset /

! 3
setini = L128-4-2.set /
  MODETEST
  band='18cm'  pol=dual  bbfilter=8  nchan=4    bits=2 /
endset /

! 4
setini = L128-8-1.set /
  MODETEST
  band='18cm'  pol=dual  bbfilter=8  nchan=8    bits=1 /
endset /

! 5
setini = L128-8-2.set /
  MODETEST
  band='18cm'  pol=dual  bbfilter=4  nchan=8    bits=2 /
endset /

! 6
setini = L128-16-1.set /
  MODETEST
  band='18cm'  pol=dual  bbfilter=4  nchan=16   bits=1 /
endset /

! 7
setini = L128-16-2.set /
  MODETEST
  band='18cm'  pol=dual  bbfilter=2  nchan=16   bits=2 /
endset /

! 8
setini = L256-4-2.set /
  MODETEST
  band='18cm'  pol=dual  bbfilter=16 nchan=4    bits=2 /
endset /

! 9
setini = L256-8-1.set /
  MODETEST
  band='18cm'  pol=dual  bbfilter=16 nchan=8    bits=1 /
endset /

! 10
setini = L256-8-2.set /
  MODETEST
  band='18cm'  pol=dual  bbfilter=8  nchan=8    bits=2 /
endset /

! 11
setini = L256-16-1.set /
  MODETEST
  band='18cm'  pol=dual  bbfilter=8  nchan=16   bits=1 /
endset /

! 12
setini = L256-16-2.set /
  MODETEST
  band='18cm'  pol=dual  bbfilter=4  nchan=16   bits=2 /
endset /

! 13
setini = L512-8-2.set /
  MODETEST
  band='18cm'  pol=dual  bbfilter=16 nchan=8    bits=2 /
endset /

! 14
setini = L512-16-1.set /
  MODETEST
  band='18cm'  pol=dual  bbfilter=16 nchan=16   bits=1 /
endset /

! 15
setini = L512-16-2.set /
  MODETEST
  band='18cm'  pol=dual  bbfilter=8  nchan=16   bits=2 /
endset /

! ==========================================================
! =================  Initial Scan Information  =============
! ==========================================================

year     = 2006
month    = 8
day      = 30
start    = 12:55:00

stations = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK

srccat /
source='B0329+54' ra=03:32:59.3470  dec=54:34:43.2454  equinox='J2000' /
endcat /

source = 'B0329+54' dur=180
gap = 60

setup = 'L128-2-2.set'  /
setup = 'L128-4-1.set'  /
setup = 'L128-4-2.set'  /
setup = 'L128-8-1.set'  /
setup = 'L128-8-2.set'  /
setup = 'L128-16-1.set' /
setup = 'L128-16-2.set' /
setup = 'L256-4-2.set'  /
setup = 'L256-8-1.set'  /
setup = 'L256-8-2.set'  /
setup = 'L256-16-1.set' /
setup = 'L256-16-2.set' /
setup = 'L512-8-2.set'  /
setup = 'L512-16-1.set' /
setup = 'L512-16-2.set' /