! ================================================================
!   Preferred Dynamic Contraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           o   o   o   o   o   o   o   o   o   o
!       Minimum number of stations [9 (6 for 3mm)]: 9
!       May we swap PT for a single VLA antenna? [NO]
!          Consult http://www.aoc.nrao.edu/~gtaylor/y1gotcha.html
!          to decide.  If you adopt the default, then both PT and
!          VLA1 must be in the stations list in the keyin file.
!    Bands and polarizations.  Below each band code, insert "R" 
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual 
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!           90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!                                         R    L         L
! Weather constraints:
!    [7mm, all stations: Rain is not welcome (astrometric obs)]
! Date constraints:
!    Preferred date(s), usually a series start [none]:
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days:
!
!    [Minimum interval. Segments a,b,c are planned to be consecutive]
!
!    Special conditions (e.g., a series with different
!       spacings in time) [none]:
! ================================================================

!$SCHED/bin/sched << EOF
!
! ==========================================================
! =================  Cover Information  ====================
! ==========================================================
!
 version = 1
 expt    = 'Absolute kinematics - S5 polar cap sample - 2cm'
 expcode = bm209b

 piname   = 'J.M. Marcaide'
 address1 = 'Departament d Astronomia i Astrofisica'
 address2 = 'Universitat de Valencia'
 address3 = 'E-46100 Burjassot - Valencia
 address4 = 'Spain'
 phone    = '+34-96-3543079'
 obsphone = '+34-69-3543078, +49-228-525292'
 email    = J.M.Marcaide@uv.es
 fax      = '+34-96-3543084'
 obsmode  = ' 2cm 64-4-1-L'
 obstype  = VLBA
 note1    = ' ' 

! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================
 
correl   = Socorro
coravg   = 2
corchan  = 8 
cornant  = 10
corpol   = off
corwtfn  = uniform
corsrcs  = standard
cortape  = DAT
corship1 = 'Prof. J.M. Marcaide'
corship2 = 'D. Astronomia, Universidad de Valencia'
corship2 = 'E-46100 Burjassot-Valencia, Spain'
!
! ==========================================================
! ==================  Program control  =====================
! ==========================================================
!
!    Normally SCHED will not overwrite preexisting files. 
!    If you want this protection, comment this following line.
overwrit
!
!    To only process VLBA and VLA stations, uncomment the following line:
dosta 'vl'
!
!  Use automatic tape allocation on VLBA control system
!  antennas with 2 or more tape drives
!
autotape = 2

minpause = 40 
!
! ==========================================================
! ======= Standard Source and Station Catalogs  ============
! ==========================================================
! 
stafile = $SCHED/catalogs/stations.dat
srcfile = $SCHED/catalogs/sources.vlba
!
! ==========================================================
! =================  Initial Scan Information  =============
! ==========================================================
!
! ==========================================================
!
setup = $SCHED/setups/v2cm-64-4-1-L.set

lst      ='VLBA_PT' 
day      = 59980
start = 00:00:00

!
! ==========================================================
!                     STATIONS 
! ==========================================================

stations = vlba_sc, vlba_hn, vlba_nl, vlba_fd, vlba_la,
           vlba_pt, vlba_kp, vlba_ov, vlba_br, vlba_mk

!
! ==========================================================
!              MAIN BODY OF SCHEDULE 
! ==========================================================

! Strong fringe finder  
! REMARKS='USNO - Ref Frame 1998-6, Eubanks June 1998' /
source = '0836+710' dwell = 04:00 /
!

! BLOCK 1  -- Aprox 2 hours 30 min
!
group 3 repeat 18 
source = '0615+820' dwell = 01:00 /
source = '1039+811' dwell = 01:00 /
source = '1150+812' dwell = 01:00 /
!    
source = '0615+820' gap = 02:02 dwell = 01:00 /
source = '1039+811' gap = 0 dwell = 01:00 /
source = '1150+812' dwell = 01:00 /
!
group 3 repeat 18 
source = '0615+820' dwell = 01:00 /
source = '1039+811' dwell = 01:00 /
source = '1150+812' dwell = 01:00 /
!    
source = '0615+820' gap = 02:02 dwell = 01:00 /
source = '1039+811' gap = 0 dwell = 01:00 /
source = '1150+812' dwell = 01:00 /
!
! UT aprox 11:30 
!
! BLOCK 2  -- Aprox 2 hours 20 min
!
group 3 repeat 18 
source = '0615+820' dwell = 01:00 /
source = '1150+812' dwell = 01:00 /
source = '1803+784' dwell = 01:00 /
!
source = '0615+820' gap = 02:02 dwell = 01:00 /
source = '1150+812' gap = 0 dwell = 01:00 /
source = '1803+784' dwell = 01:00 /
!
group 3 repeat 18 
source = '0615+820' dwell = 01:00 /
source = '1150+812' dwell = 01:00 /
source = '1803+784' dwell = 01:00 /
!
source = '0615+820' gap = 02:02 dwell = 01:00 /
source = '1150+812' gap = 0 dwell = 01:00 /
source = '1803+784' dwell = 01:00 /
! 
! UT aprox 14:50
!
! BLOCK 3  -- Aprox  1 hour 30 min
!
group 3 repeat 28 
source = '2007+777' dwell = 01:00 /
source = '1803+784' dwell = 01:00 /
source = '1749+701' dwell = 01:00 /
!
source = '2007+777' gap = 02:02 dwell = 01:00 /
source = '1803+784' gap = 0 dwell = 01:00 /
source = '1749+701' dwell = 01:00 /
!
! BLOCK 4  -- Aprox 2 hours
!
group 4 repeat 30 
source = '2007+777' dwell = 01:00 /
source = '1803+784' dwell = 01:00 /
source = '1928+738' dwell = 01:00 /
source = '1749+701' dwell = 01:00 /
!
source = '2007+777' gap = 02:02 dwell = 01:00 /
source = '1803+784' gap = 0 dwell = 01:00 /
source = '1928+738' dwell = 01:00 /
source = '1749+701' dwell = 01:00 /
!
!
! BLOCK 5  -- Aprox 1 hour 30 min
!
group 3 repeat 30 
source = '2007+777' dwell = 01:00 /
source = '1803+784' dwell = 01:00 /
source = '1928+738' dwell = 01:00 /
!
source = '2007+777' gap = 02:02 dwell = 01:00 /
source = '1803+784' gap = 0 dwell = 01:00 /
source = '1928+738' dwell = 01:00 /
!
! BLOCK 6  -- Aprox 1 hour 30 min
!
group 3 repeat 30 
source = '2007+777' dwell = 01:00 /
source = '1928+738' dwell = 01:00 /
source = '0016+731' dwell = 01:00 /
!
source = '2007+777' gap = 02:02 dwell = 01:00 /
source = '1928+738' gap = 0 dwell = 01:00 /
source = '0016+731' dwell = 01:00 /
!
! BLOCK 6  -- Aprox 1 hour 45 min
!
group 3 repeat 32 
source = '2007+777' dwell = 01:00 /
source = '0016+731' dwell = 01:00 /
source = '0153+744' dwell = 01:00 /
!
source = '2007+777' gap = 02:02 dwell = 01:00 /
source = '0016+731' gap = 0 dwell = 01:00 /
source = '0153+744' dwell = 01:00 /
!
! BLOCK 7  -- Aprox 1 hour 45 min
!
! Strong fringe finder
! REMARKS='JVAS - Patnaik et al. 1992, mnras, 254, 655;   S8.4GHz= 33643 mJy'
source = '3C84' dwell = 04:00 /
!
group 3 repeat 32 
source = '0615+820' dwell = 01:00 /
source = '0153+744' dwell = 01:00 /
source = '0212+735' dwell = 01:00 /
!
source = '0615+820' gap = 02:02 dwell = 01:00 /
source = '0153+744' gap = 0 dwell = 01:00 /
source = '0212+735' dwell = 01:00 /
!
! BLOCK 8  -- Aprox 2 hours
!
group 3 repeat 32 
source = '0615+820' dwell = 01:00 /
source = '0454+844' dwell = 01:00 /
source = '0716+714' dwell = 01:00 /
!
source = '0615+820' gap = 02:02 dwell = 01:00 /
source = '0454+844' gap = 0 dwell = 01:00 /
source = '0716+714' dwell = 01:00 /
!

! BLOCK 9  -- Aprox 2 hours
!
group 3 repeat 12
source = '0615+820' dwell = 01:00 /
source = '0716+714' dwell = 01:00 /
source = '0836+710' dwell = 01:00 /
!
source = '0615+820' gap = 02:02 dwell = 01:00 /
source = '0716+714' gap = 0 dwell = 01:00 /
source = '0836+710' dwell = 01:00 /
!
!
group 3 repeat 10
source = '0615+820' dwell = 01:00 /
source = '0716+714' dwell = 01:00 /
source = '0836+710' dwell = 01:00 /
!
source = '0615+820' gap = 02:02 dwell = 01:00 /
source = '0716+714' gap = 0 dwell = 01:00 /
source = '0836+710' dwell = 04:00 /
!