! project BD099
! part A   = target source B3-0147+400
!
! VLBA + Y1 obs. at L, C and X bands of a CSS source from the B3-VLA sample
!
overwrit
autotape  = 2
!
!================ cover information ================
!
 VERSION  = 1
 expt      = 'Spectral age in Compact Symmetric Objects'
 obstype   = 'VLBA'
 expcode   = BD099A
 PINAME   = 'Dallacasa Daniele'
 ADDRESS1 = 'Istituto di Radioastronomia -- CNR'
 ADDRESS2 = 'Via Gobetti n. 101'
 ADDRESS3 = 'I-40129 Bologna '
 ADDRESS4 = 'ITALY'
 PHONE    = '+39 051 6399386'
 FAX      = '+31 051 6399431'
 EMAIL    = 'ddallaca@ira.cnr.it'
 CORREL   = 'Socorro'
 Note1    = 'Non standard frequecies used'
!
!=============== Correlator Information ============
!
correl    = 'Socorro'
coravg    = 4
corchan   = 16
cornant   = 11
corpol    = 'on'
corwtfn   = 'uniform'
corsrcs   = 'SCHEDULE'
cortape   = DAT
corship1  = 'Daniele Dallacasa'
corship2  = 'Istituto di Radioastronomia - CNR'
corship3  = 'I-40129 Bologna, ITALY'
!
!=============== Seutp Information ==================
!
setini = v18cm_nst.set /
!
! custom setup for deep 21 cm observations made by G. Taylor on 
! 6/18/1999  CAVEAT EMPTOR and modified for D. Dallacasa 1/15/2000
! modified again on 30.04.2004
!     Format      Tape length  Density  Tape speed  Time/pass
! VLBA/MkIII/MkIV    17600      High     160.00        44:00
!     128 Mbps - 
!
  nchan    = 4
  bits     = 2
  bbfilter = 8.0
fe(1) = '20cm'
fe(3) = '20cm'
synth(2) = 2.4
firstlo = 2400
  freqref  =   1414.9
  freqoff  =  -11.50,  -11.50,   224.50, 224.50
  netside  =  U, U, U, U
  pol      = dual
station  = VLBA
/
! vla frequency setups
! put 1414.9 MHz at center of a 50 MHz vla band
! put 1664.9 MHz at center of a 50 MHz vla band
! F_vla = 1414.9 - 25.0 MHz = 1389.9
! F_vla = 1664.9 - 25.0 MHz = 1639.9
  nchan    = 4
  bits     = 2
  bbfilter = 8.0
vlaband  = VL     vlabw = '0000'
flukeset=0
vlaif    = 'SYSLIF'
vlarot   = 'VLBLROT'
vlafeab  = -3.2   ! F1 GHz
vlafecd  = -3.2
vlasyna  = 3589.9 ! F6 = 2400.+(24*50)-10.1 MHz
vlasynb  = 3839.9
flukea   = 100.0 ! FA MHz
flukeb   = 200.0 ! 2FB = 100.+FA MHz
! these F1, F6, and FA values
! => F_vla = -3200.+3589.9+900.+ 100.0 = 1389.9
! => F_vla = -3200.+3839.9+900.+ 100.0 = 1639.9
firstlo  = 789.9, 789.9, 1039.9, 1039.9 ! F_vla-600.
ifchan = A, C, B, D
station  = VLA1
  /
endset  /
!
!------------------------
!
setini = v6cm_nst.set /
! NON STANDARD setup invented by Greg Taylor on 5/13/1999
! based on... 
!        VLA 50MHz 4960.1 to 5010.1 with VC mode.
!        VLA 6cm receiver falling off at high end.
!      Reference frequency is Mark II network standard
!      Merlin 4986-5002

!     Format      Tape length  Density  Tape speed  Time/pass
! VLBA/MkIII/MkIV    17600      High     160.00        22:00
!    MkIII/MkIV       8800      Low      270.00         6:31
!      128 Mbps - 2 pass/headpos
!  modified on 30.04.2004
  nchan    = 4
  bits     = 2
  bbfilter = 8.0
  freqref  =   4534.99
  freqoff  =  4.00, 4.00,  354.0,  354.0
  netside  =  U, U, U, U
  pol      = dual
  station  = VLBA
  /
! vla frequency setups
! put 4535.1 MHz at center of a 25 MHz vla band - AC
! and 4885.1 MHz in BD 
! F_vla = 4535.1 - 12.5 MHz = 4522.6
  nchan    = 4
  bits     = 2
  bbfilter = 8.0
vlaband  = CC     vlabw = '1111'
flukeset=0
vlaif    = ''
vlarot   = ''
vlafeab  = 0.0   ! F1 GHz
vlafecd  = 0.0
vlasyna  = 3510.1 ! F6 = 2400.+(22*50)+10.1 MHz
vlasynb  = 3860.1
flukea   = 112.50 ! FA MHz
flukeb   = 212.50 ! 2FB = 100.+FA MHz
! these F1, F6, and FA values
! AC => F_vla = 0 + 3510.1 +900.+112.50 = 4522.6 MHz
firstlo  = 3922.6 ! F_vla-600.
! BD => F_vla = 0 + 3860.1 +800.+212.50 = 4872.6 MHz
firstlo  = 4272.6 ! F_vla-600.
! firstlo = 3906.1, 3906.1, 3914.1, 3914.1, 4256.1, 4256.1, 4264.1, 4264.1
!firstlo = 3922.6, 3922.6, 3922.6, 3922.6, 4272.6, 4272.6, 4272.6, 4272.6
firstlo = 3922.6, 3922.6, 4272.6, 4272.6
fe(1) = '6cm'   fe(3) = '6cm'
ifchan   =  A, C, B, D
station  = VLA1  /
endset  /
!
!-----------------------
!
setini = v4cm_nst.set /
! NON STANDARD setup invented by Greg Taylor on 5/13/1999
! based on...
! Standard setup file: v4cm-256-8-2.set                        
! modified by Daniele Dallacasa on 06/26/2000 to accomodate
! a 64-4-1.set type.
! modified again on 30.04.2004 to make 128 Mbps recording 
! 128-4-2.set
!     (Produced by MAKESETUP)
!      For the 4 cm band.
!
!     Format      Tape length  Density  Tape speed  Time/pass
! VLBA/MkIII/MkIV    17600      High     160.00        22:00
!    MkIII/MkIV       8800      Low      270.00         6:31
!     128 Mbps 
  nchan    = 4
  bits     = 2
  bbfilter = 8.0
  freqref  =   8114.99
  freqoff  =  -4.00, -4.00, 374.0,  374.0
  netside  =  U, U, U, U
  pol      = dual
  station  = VLBA
  /
! vla frequency setups
! put 8114.9 MHz at center of a 25 MHz vla band - AC
! and 8485.1 MHz in BD 
! F_vla = 8114.9 + 12.5 MHz = 8127.4
  nchan    = 4
  bits     = 2
  bbfilter = 8.0
vlaband  = XX     vlabw = '1111'
flukeset=0
vlaif    = ''
vlarot   = ''
vlafeab  = 13.0   ! F1 GHz
vlafecd  = 13.0
vlasyna  = 3860.1 ! F6 = 2400.+(29*50)+10.1 MHz
vlasynb  = 3489.9
flukea   = 112.50 ! FA MHz
flukeb   = 212.50 ! 2FB = 100.+FA MHz
! these F1, F6, and FA values
! AC => F_vla = 13000 - 3860.1 - 900. -112.50 = 8127.4 MHz
firstlo  = 8727.4 ! F_vla+600.
! BD => F_vla = 13000 - 3489.9 - 800. -212.50 = 8497.6 MHz
firstlo  = 9097.6 ! F_vla+600.
firstlo = 8727.4, 8727.4, 9097.6, 9097.6
fe(1) = '4cm'   fe(3) = '4cm'
ifchan   =  A, C, B, D
station  = VLA1  /
endset  /
!
!---------
!
stafile   = '$SCHED/catalogs/stations.dat'
stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK, VLA1
!
!
!
srccat /
!!! Calibrators & Fringe Finders
!!!
!source='OQ208' ra=14:07:00.3947 dec=28:27:14.690 equinox='J2000' calcode=' ' /
!source='DA193'      from built in catalogue
!source='3C279'      from built in catalogue
!!!! New catalogue
source='0147+400' ra=01:50:19.5995 dec=+40:17:30.010 equinox='J2000' calcode=' ' /
!source='0840+424' ra=08:43:31.6353 dec=+42:15:29.505 equinox='J2000' calcode=' ' /
!source ='J2136+0041'  from built in catalogue
source='J0136+4751' ra=01:36:58.594810 dec=+47:51:29.10006 equinox='J2000' calcode=' '/
!source='J0927+3902' ra=09:27:03.013916 dec=+39:02:20.85195 equinox='J2000' calcode=' '/ 
endcat/
!
!========================Start observing commands
!
year  = 2004 
month = 8 
day   = 12
start = 07:00:00 
!
gap=00:00
minpause=0
prescan=0
VLAMODE='VS'
!
setup     = v4cm_nst.set
source='J2136+0041'  dwell=05:00 / !fringe finder
setup     = v6cm_nst.set
source='J2136+0041'  dur  =04:30 / !fringe finder
setup     = v18cm_nst.set
source='J2136+0041'  dur  =04:30 / !fringe finder
source='0147+400' dwell=06:00 /
setup     = v6cm_nst.set
source='0147+400'   dur=06:00 /
setup     = v4cm_nst.set
source='0147+400'   dur=06:00 /
setup     = v18cm_nst.set
source='0147+400'   dur=06:00 /
setup     = v6cm_nst.set
source='0147+400'   dur=06:00 /
! end of first pass
gap 02:00
setup     = v4cm_nst.set
source='0147+400'   dur=06:00 /
gap 00:00
group 6 rep 2 /
setup     = v18cm_nst.set
source='0147+400'   dur=06:20 /
setup     = v6cm_nst.set
source='0147+400'   dur=06:20 /
setup     = v4cm_nst.set
source='0147+400'   dur=06:20 /
! end of second pass
group 6 rep 2 /
setup     = v18cm_nst.set
source='0147+400'   dur=07:20 /
setup     = v6cm_nst.set
source='0147+400'   dur=07:20 /
setup     = v4cm_nst.set
source='0147+400'   dur=07:20 /
! end of third pass
gap 02:00
source='J0136+4751' dur=04:00 /
setup     = v18cm_nst.set
gap 00:00
source='J0136+4751' dur=04:00 /
setup     = v6cm_nst.set
source='J0136+4751' dur=04:00 /
group 6 rep 2 /
setup     = v18cm_nst.set
source='0147+400'   dur=05:20 /
setup     = v6cm_nst.set
source='0147+400'   dur=05:20 /
setup     = v4cm_nst.set
source='0147+400'   dur=05:20 /
! end of fourth pass
group 6 rep 2 /
setup     = v18cm_nst.set
source='0147+400'   dur=07:20 /
setup     = v6cm_nst.set
source='0147+400'   dur=07:20 /
setup     = v4cm_nst.set
source='0147+400'   dur=07:20 /
! end of fifth pass
group 6 rep 2 /
setup     = v18cm_nst.set
source='0147+400'   dur=07:20 /
setup     = v6cm_nst.set
source='0147+400'   dur=07:20 /
setup     = v4cm_nst.set
source='0147+400'   dur=07:20 /
! end of sixth pass
gap 02:00
source='J0136+4751' dur=04:00 /
setup     = v18cm_nst.set
gap 00:00
source='J0136+4751' dur=04:00 /
setup     = v6cm_nst.set
source='J0136+4751' dur=04:00 /
group 6 rep 2 /
setup     = v18cm_nst.set
source='0147+400'   dur=05:20 /
setup     = v6cm_nst.set
source='0147+400'   dur=05:20 /
setup     = v4cm_nst.set
source='0147+400'   dur=05:20 /
! end of seventh pass
group 6 rep 4/
setup     = v18cm_nst.set
source='0147+400'   dur=07:20 /
setup     = v6cm_nst.set
source='0147+400'   dur=07:20 /
setup     = v4cm_nst.set
source='0147+400'   dur=07:20 /
! end of eigth + ninth pass
gap 02:00
source='J0136+4751' dur=04:00 /
setup     = v18cm_nst.set
gap 00:00
source='J0136+4751' dur=04:00 /
setup     = v6cm_nst.set
source='J0136+4751' dur=04:00 /
group 6 rep 2 /
setup     = v18cm_nst.set
source='0147+400'   dur=05:20 /
setup     = v6cm_nst.set
source='0147+400'   dur=05:20 /
setup     = v4cm_nst.set
source='0147+400'   dur=05:20 /
!end of tenth pass
group 6 rep 2 /
setup     = v18cm_nst.set
source='0147+400'   dur=07:20 /
setup     = v6cm_nst.set
source='0147+400'   dur=07:20 /
setup     = v4cm_nst.set
source='0147+400'   dur=07:20 /
! end of eleventh pass
gap 02:00
source='DA193'    dwell=04:00 /
setup     = v18cm_nst.set
gap 00:00
source='DA193'      dur=04:00 /
setup     = v6cm_nst.set
source='DA193'      dur=04:00 /
setup     = v18cm_nst.set
source='0147+400'   dur=09:00 /
setup     = v6cm_nst.set
source='0147+400'   dur=09:00 /
setup     = v4cm_nst.set
source='0147+400'   dur=09:34 /
!
! End of BD099A
!