! ================================================================
!   Preferred Dynamic Contraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           o   o   o   o   o   o   o   o   o   o
!       Minimum number of stations [9 (6 for 3mm)]: 
!       May we swap PT for a single VLA antenna? [yes] no
!          Consult http://www.aoc.nrao.edu/~gtaylor/y1gotcha.html
!          to decide.  If you adopt the default, then both PT and
!          VLA1 must be in the stations list in the keyin file.
!    Bands and polarizations.  Below each band code, insert "R" 
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual 
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!           90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!                                                   d
! Weather constraints: 
!    [appropriate for bands marked "L", "R", or "d" above
!     and for at least the minimum number of stations]
! Date constraints:
!    Preferred date(s), usually a series start [none]: as soon as possible
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days [none]:15 
!    Special conditions (e.g., a series with different
!       spacings in time) [none]:
! ================================================================
VERSION  = 1
EXPT     = 'VLBA format H2O  YLW16A 1/6 epochs'
EXPCODE  = 'bc128f'
OBSTYPE  = 'VLBA'
SRCFILE  = 'NONE'  
PINAME   = 'M. Claussen'
ADDRESS1 = 'NRAO-AOC'
ADDRESS2 = 'P.O. Box O'
ADDRESS3 = 'Socorro, NM 87801'
PHONE    = '505-835-7284'
OBSPHONE = '505-835-4071'
FAX      = '505-835-7027'
EMAIL    = 'mclausse@nrao.edu'
NOTE1    = 'Use all available antennas.'
!
! =================================================================
! =====================  Tape Initialization  =====================
! =================================================================
!
tapeini /
tpsta    = 'VLBA', 'VLA1'
ndrives  = 2 , 2
nheadpos = 14, 14
tpdrive  = 1, 1
tpindex  = 1, 1
tplength = 17600, 17600
density  = high, high
/
autotape = 2
!
! end tape initialization stuff
!
! =================================================================
! ====================  Correlator Information  ===================
! =================================================================
!
correl = 'Socorro'
coravg = 1.048
corchan = 512
cornant = 10
corpol = 'off'
corship1 = 'M. Claussen'
corship2 = 'NRAO-AOC'
cortape 'DAT'
corwtfn = 'uniform'
corsrcs = 'use sched positions for correlation of target'

!
! end correlator parameters
!
overwrit
sumitem = el1, el2, tape1, tape2, early, dwell  
!
srccat /
!  H2O maser source. Will use multiple correlation passes 
!
SOURCE='IRAS4ABC'    RA=03:26:06.53     DEC= 31:03:13.4  EPOCH='B1950'
			VEL= +8.0 /
SOURCE='SSV13'       RA=03:25:58.178    DEC= 31:05:45.28 EPOCH='B1950'
			VEL= 0.0 /
SOURCE='YLW16A'      RA=16:24:26.163    DEC= -24:32:53.45 EPOCH='B1950'
			VEL= 0.0 /


!
!  calibrator sources
!
SOURCE='3C286'      RA= 13:31:08.2873  DEC= 30:30:32.959     EPOCH='J2000' /
SOURCE='3C345'      RA= 16:42:58.8099  DEC= 39:48:36.993     EPOCH='J2000' /
SOURCE='3C454.3'    RA= 22:53:57.7479  DEC= 16:08:53.563     EPOCH='J2000' /
SOURCE='3C84'       RA=03:19:48.160100 DEC= 41:30:42.1060000 EPOCH='J2000' /
SOURCE='NRAO150'    RA=03:59:29.747257 DEC= 50:57:50.1620860 EPOCH='J2000' /
SOURCE='J0329+3510' RA=03:29:15.3553 DEC=25:10:05.940        EPOCH='J2000' /
SOURCE='J1625-2527' RA=16:25:46.891640 DEC=-25:27:38.32688        EPOCH='J2000' /
endcat /
!
!
stafile  = '$SCHED/catalogs/stations.dat'
!
!
! Spectral lines
!
lineinit /
lineset ='H2O'  restfreq=22235.08, 22235.08  /
endlines /
! 
setinit = bc089.set /
!
!   Setup for VLBA + Y1 observations of
!   22-GHz H2O line.
!   4 MHz bandwidth, 1.3 cm wavelength
!
!
nchan = 2  samprate = 16.0  bits = 2  bbfilter = 8.0   ! 64 Mbps
tpmode = 2  format = 'VLBA1:4'
firstlo = 21500.00 fe(2)    = '1cm'   fe(4)  = '1cm'
freqref  =  22235.08, 22235.08
bbc      =       1,       2
netside  =       U,       U
ifchan   =       R,       L
pcal     = 'off'
station  = 'VLBA'
rchan = B  lchan = D   /
endset /
!
!
!
!year   = 2003
!month  = 05
day    = 59589
start  = 13:30:00
lst = 'vlba_pt'
!
obstype='vlba'
!
STATIONS = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA,
           VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK
!
!                                                                   
!
!
!
DOPPLER
SETUP = 'bc089.set'
LINENAME='H2O'
BW = 8.0, 8.0
!
SOURCE = '3C345' GAP = 00:02:00 dwell = 00:03:30 DOPSRC 'YLW16A' /
! 
SOURCE = 'J1625-2527' GAP = 00:00:00 dwell = 00:02:00 / 
!
group=2
repeat=108 SOURCE = 'J1625-2527' dwell = 00:00:15 / 
SOURCE = 'YLW16A' dwell=00:0:30 /
!
SOURCE = '3C345' GAP = 00:02:00 dwell = 00:03:30 DOPSRC 'YLW16A' /
!
SOURCE = 'J1625-2527' GAP = 00:00:00 dwell = 00:02:00 / 
!
group=2
repeat=108 SOURCE = 'J1625-2527' dwell = 00:00:15 / 
SOURCE = 'YLW16A' dwell=00:00:30 /
!
SOURCE = '3C345' GAP = 00:02:00 dwell = 00:03:30 DOPSRC 'YLW16A' /
!
SOURCE = 'J1625-2527' GAP = 00:00:00 dwell = 00:02:00 / 
!
group=2
repeat=108 SOURCE = 'J1625-2527' dwell = 00:00:15 / 
SOURCE = 'YLW16A' dwell=00:00:30 /
!
SOURCE = '3C345' GAP = 00:02:00 dwell = 00:03:30 DOPSRC 'YLW16A' /