! ==========================================================
! =================  Cover Information  ====================
! ==========================================================
version  =  2
expt     = 'BP089; 22 and 43 GHz of fast superluminal sources'
expcode  =  bp089d
piname   = 'Glenn Piner'    
address1 = 'Whittier College '
address2 = 'Dept. Physics and Astronomy'
address3 = '13406 E. Philadelphia St'          
address4 = 'Whittier CA 90608'
phone    = '562-464-4556 '    
obsphone = '562-464-4556 '    
email    = 'gpiner@whittier.edu '
fax      = '562-464-4514 '
obsmode  = '128-8-1'
obstype  =  VLBA
note1    = 'Fringe finders/pol. cal. : J0423-01, OJ287, 3C279 '
! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================
correl   = 'Socorro'
coravg   =   2
corchan  =  16
cornant  =  10
corpol   = 'on'
corwtfn  = 'uniform'
corsrcs  = 'standard'
cortape  =  EXABYTE
corship1 = 'Glenn Piner'
corship2 = 'Whittier College, Dept. Physics and Astronomy'
corship3 = '13406 E. Philadelphia St'          
corship4 = 'Whittier CA 90608'
! ==========================================================
! ==================  Program control  =====================
! ==========================================================
!
overwrit
sumitem = el1, el2, tape1, tape2, early, dwell  
! dosta 'vl'
!
! ==========================================================
! ======= Standard Source and Station Catalogs  ============
! ==========================================================
! 
stafile = $SCHED/catalogs/stations.dat
srcfile = $SCHED/catalogs/sources.vlba

! ==========================================================
! =================  Initial Scan Information  =============
! ==========================================================
!
! "6 times 18.0 hours dynamically scheduled centered at LST 8.5"

autotape = 2

!year  = 2002
!month = 11
day   = 59231

LST   ='VLBA_PT'
start = 23:30:00
!start = 03:50:00

setup = $SCHED/setups/v7mm-128-8-1.set

stations = SC, HN, NL, FD, LA, KP, OV, BR, MK, PT, VLA1
source='0235+164'                dur=22:00  vlamode="vs" /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='0235+164'   gap=120      dur= 3:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='0235+164'   gap= 30      dur=12:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='0235+164'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='J0423-01'   gap=120      dur= 4:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 3:00  /  
! 00:30 LST

setup = $SCHED/setups/v7mm-128-8-1.set
source='0235+164'   gap=120      dur=12:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='0235+164'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='0235+164'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='J0423-01'   gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='0235+164'   gap=120      dur=20:00  /  
! 01:30 LST


setup = $SCHED/setups/v7mm-128-8-1.set
source='0235+164'   gap=  0      dur=14:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='0235+164'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='0235+164'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='J0423-01'   gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='0235+164'   gap=120      dur=20:00  /  
! 02:30 LST


setup = $SCHED/setups/v7mm-128-8-1.set
source='0235+164'   gap=  0      dur=14:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='0235+164'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='0235+164'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='J0423-01'   gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='0235+164'   gap=120      dur=20:00  /  
! 03:30 LST

setup = $SCHED/setups/v7mm-128-8-1.set
source='0235+164'   gap=  0      dur=10:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='0235+164'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='0235+164'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='J0423-01'   gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='OJ287'      gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='OJ287'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='OJ287'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='0235+164'   gap=120      dur=10:00  /  
! 04:30 LST

setup = $SCHED/setups/v7mm-128-8-1.set
source='0235+164'   gap=  0      dur=10:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='0235+164'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='0235+164'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='J0423-01'   gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='OJ287'      gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='OJ287'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='OJ287'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='0235+164'   gap=120      dur=10:00  /  
! 05:30 LST

!setup = $SCHED/setups/v2cm-128-8-1.set
!setup = $SCHED/setups/v1cm-128-8-1.set
!setup = $SCHED/setups/v7mm-128-8-1.set


setup = $SCHED/setups/v1cm-128-8-1.set
source='0827+243'   gap=120      dur= 9:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='0827+243'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='0827+243'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='J0423-01'   gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='OJ287'      gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='OJ287'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='OJ287'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='0827+243'   gap=120      dur= 9:00  /  
! 06:30 LST


setup = $SCHED/setups/v1cm-128-8-1.set
source='0827+243'   gap=  0      dur=10:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='0827+243'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='0827+243'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='J0423-01'   gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='J0423-01'   gap= 30      dur= 4:00  /
setup = $SCHED/setups/v7mm-128-8-1.set
source='OJ287'      gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='OJ287'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='OJ287'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='0827+243'   gap=120      dur=10:00  /  
! 07:30 LST

setup = $SCHED/setups/v1cm-128-8-1.set
source='0827+243'   gap=  0      dur=17:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='0827+243'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='0827+243'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='OJ287'      gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='OJ287'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='OJ287'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='0827+243'   gap=120      dur=17:00  /  
! 08:30 LST

setup = $SCHED/setups/v1cm-128-8-1.set
source='0827+243'   gap=  0      dur=10:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='0827+243'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='0827+243'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='OJ287'      gap= 60      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='OJ287'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='OJ287'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='3C279'      gap=150      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='3C279'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='3C279'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='0827+243'   gap=150      dur=10:00  /  
! 09:30 LST

setup = $SCHED/setups/v1cm-128-8-1.set
source='0827+243'   gap=  0      dur=17:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='0827+243'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='0827+243'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='3C279'      gap=150      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='3C279'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='3C279'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='0827+243'   gap=150      dur=16:00  /  
! 10:30 LST

setup = $SCHED/setups/v1cm-128-8-1.set
source='0827+243'   gap=  0      dur=18:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='0827+243'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='0827+243'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='OJ287'      gap= 60      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='OJ287'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='OJ287'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='0827+243'   gap= 60      dur=18:00  /  
! 11:30 LST

setup = $SCHED/setups/v1cm-128-8-1.set
source='1406-076'   gap=120      dur= 9:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='1406-076'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='1406-076'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='OJ287'      gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='OJ287'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='OJ287'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='3C279'      gap=150      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='3C279'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='3C279'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='1406-076'   gap= 90      dur= 9:00  /  
! 12:30 LST

setup = $SCHED/setups/v1cm-128-8-1.set
source='1406-076'   gap=  0      dur=10:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='1406-076'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='1406-076'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='OJ287'      gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='OJ287'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='OJ287'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='3C279'      gap=150      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='3C279'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='3C279'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='1406-076'   gap= 90      dur=10:00  /  
! 13:30 LST

setup = $SCHED/setups/v1cm-128-8-1.set
source='1406-076'   gap=  0      dur=17:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='1406-076'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='1406-076'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='3C279'      gap=150      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='3C279'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='3C279'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='1406-076'   gap= 90      dur=17:00  /  
! 14:30 LST

setup = $SCHED/setups/v1cm-128-8-1.set
source='1406-076'   gap=  0      dur=25:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='1406-076'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='1406-076'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='1406-076'   gap= 30      dur=24:30  /  
! 15:30 LST

setup = $SCHED/setups/v7mm-128-8-1.set
source='3C279'      gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='3C279'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='3C279'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='1406-076'   gap=120      dur=17:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='1406-076'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='1406-076'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='1406-076'   gap= 30      dur=16:30  /  
! 16:30 LST

setup = $SCHED/setups/v7mm-128-8-1.set
source='3C279'      gap=120      dur= 4:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='3C279'      gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='3C279'      gap= 30      dur= 4:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='1406-076'   gap=120      dur=17:00  /  
setup = $SCHED/setups/v2cm-128-8-1.set
source='1406-076'   gap= 30      dur= 3:00  /  
setup = $SCHED/setups/v7mm-128-8-1.set
source='1406-076'   gap= 30      dur= 6:00  /  
setup = $SCHED/setups/v1cm-128-8-1.set
source='1406-076'   gap= 30      dur=16:30  /  
! 17:30 LST