! BL110 -- ``A search for ionized gas in the Galactic Warp''
! **************Dynamic Schedule**************************
! Aim of the project BL110 is to search for ionized gas in the
! Galactic Warp by observing the scattering due to this gas. 
! We plan to observe about 60 extragalactic sources
! in the region 100\deg \le l \le 105\deg and |b| < 10\deg
! at 22 cm. Sources are selected from NVSS with a flux cutoff
! of 100 mJy. Each source will be observed for about 15 mts.
! The key file BL110a.key consists of 4 sources which amounts
! to a total observing time of about 1 hr. 
!
expt     = 'BL110 - VLBA fmt 22 cm' 
expcode  = 'BL110g'
version  = 1
piname   = 'T. J. W. Lazio'
address1 = 'NRL'
address2 = 'Code 7213'
address3 = 'Washington, DC 20375-5351'
address4 = 'USA'
phone    = '1-202-404-6329'
obsphone = '1-202-404-6329'
fax      = '1-202-404-8894'
email    = 'lazio@rsd.nrl.navy.mil'
obsmode  = 'continuum'			
obstype  = 'VLBA'
opminant = 4  
opminel  = 5  
correl   = 'VLBA'
note1    = 'Fringe finder: B2251+1552; observing 4 target sources'
note2    = 'local contact: Anish Roshi aroshi@nrao.edu'
note3    = 'Phone: 1-304-456-2130'
!
! ==========================================================
! =======================  Setup File ======================
! ==========================================================
!
! BL110.set -- 22 cm 

!
! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================
!
! 
correl   = 'Socorro'
coravg   = 2 	! default 2sec sampling   
corchan  = 16   ! (continuum) default 16 channels  per BB
cornant  = 10 
corpol   = 'off'
corwtfn  = 'uniform' 
corsrcs  = 'standard and schedule'
cortape  = EXABYTE
corship1 = 'T. J. W. Lazio'
corship2 = 'Remote Sensing Division'
corship3 = 'Naval Research Lab, Code 7213'
corship4 = 'Washington, DC 20375-5351 USA'

!
! ==========================================================
! ==================  Program control  =====================
! ==========================================================
!
!    Normally SCHED will not overwrite preexisting files.
!    If you want this protection, comment this following line.
overwrit
!
!    To only process VLBA and VLA stations, uncomment the following line:
dosta 'vl' 
!
!
!
! ==========================================================
! =================== Tape initialization  =================
! ==========================================================
!
tapeini /
  tpsta   = vlba
  tpdrive = 1
  tpindex = 1
  tplength= 17600
  ndrives = 2
  nheadpos= 14
  density = H
  / 
autotape=2  ! automatic tape handling, so no need to schedule in passes   
!
! ==========================================================
! ======= Standard Source and Station Catalogs  ============
! ==========================================================
!

stafile = $SCHED/catalogs/stations.dat
!srcfile = $SCHED/catalogs/sources.vlba
srcfile=none

srccat /

source='B2210+5657'  ra=22:10:21.93    dec=+56:57:56.6   epoch='B1950' / !NVSS
source='B2210+5958'  ra=22:10:55.44    dec=+59:58:13.5   epoch='B1950' / !NVSS
source='B2212+5935'  ra=22:12:18.90    dec=+59:35:57.1   epoch='B1950' / !NVSS
source='B2212+6013'  ra=22:12:33.75    dec=+60:13:41.4   epoch='B1950' / !NVSS

source='B2251+1552'   ra=22:51:29.5281  dec=+15:52:54.242 epoch='B1950'/ ! B coord from NED; Fringe finder

endcat /


!
! The following two lines if testing at Socorro
!stafile = /home/arana/cwalker/sched/catalogs/stations.dat
!srcfile = /home/arana/cwalker/sched/catalogs/sources.vlba
!
! ==========================================================
! =================  Initial Scan Information  =============
! ==========================================================
!
! Observing strategy: 
! a. Resource allocations.
!       tape - 1 thin tape
!       vlba - +/- 0.5 hour about LST 21.0 hrs  
! b. Dual polarization in the 22 cm band
! 
!
sumitem = el1, el2, early, dwell ! sched will list these in summary file
LST=VLBA_PT             ! for PieTown LST,
stations = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA,
           VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK
!--------------------------------------------------------------------------
! IMPORTANT : The following 5 lines are for test purposes only
!               comment out these lines before submitting to scheduler
!--------------------------------------------------------------------------
! since we use LST, we have to use the modified sidereal day i.e. 58378
! year     = 2002
  day      = 59209
  start    = 20:30:00 !assumed to be in LST, bec. we used the LST command
!--------------------------------------------------------------------------

!setup='$SCHED/setups/v18cm-128-4-2.set' source='B2109+6253' dwell=0:15:00 gap=0/ !target 

setup='BL110.set' source='B2210+5657' dwell=0:15:00 gap=0/ !target 
source='B2210+5958' dwell=0:15:00 gap=0/ !target 
source='B2251+1552' dwell=0:04:00 gap=0 / !Amplitude and fringe cal
source='B2212+5935' dwell=0:15:00 gap=0/ !target 
source='B2212+6013' dwell=0:15:00 gap=0/ !target

!End of 1hr4m
!
! exit /
! end bl110g.key