overwrite
! 
!dosta'kp'
!
!
! ==========================================================
! =================  Cover Information  ====================
! ==========================================================
!
expt     = 'RIPL:  GJ686/GJ1224'
expcode  = 'BB240AB'
version  = 1
piname   = 'Geoffrey Bower'
address1 = '601 Campbell Hall'
address2 = 'UC Berkeley Astronomy'
address3 = 'Berkeley CA 94720'
phone    = '510 643-4704'
obsphone = '510 847-1722'
fax      = '510 642 3411'
! telex    = ' '
email    = 'gbower@astro.berkeley.edu'
obsmode  = 'VLBA 512-8-2 4cm'
obstype  = 'VLBA'
note1   = ''
note2   = ''
!
! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================
correl   = 'Socorro'
coravg   = 0.26
corchan  = 16
cornant  = 11
corpol   = 'off'
corwtfn  = 'uniform'
corsrcs  = 'standard'
cortape  = FTP
corship1 = 'Geoffrey Bower'
corship2 = '601 Campbell Hall'
corship3 = 'UC Berkeley Astronomy'
corship4 = 'Berkeley CA 94720'
!
! ================================================================
!   Preferred Dynamic Contraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           o   o   o   o   o   o   o   o   o   o
!       Minimum number of stations [9 (6 for 3mm)]: 9
!       May we swap PT for a single VLA antenna? [yes] no
!          Consult http://www.aoc.nrao.edu/~gtaylor/y1gotcha.html
!          to decide.  If you adopt the default, then both PT and
!          VLA1 must be in the stations list in the keyin file.
!    Bands and polarizations.  Below each band code, insert "R" 
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual 
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!           90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!                                         d     
! Weather constraints:
!    [appropriate for bands marked "L", "R", or "d" above
!     and for at least the minimum number of stations]
! Date constraints:
!    Preferred date(s), usually a series start [none]: 
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days [none]:  3 days 
!    Special conditions (e.g., a series with different
!       spacings in time) [none]: Groups of (a,b,c), (d,e,f), (g,h,i), and
!       (j,k,l) are independent.  Each group consists of three identical epochs.
!	Each epoch of a group should be observed
!       within 10 days.
! ================================================================
!
! ==========================================================
! =================== Tape initialization  =================
! ==========================================================
!**  WARNING: Check with data analysts that the following tape  **
!**           information is correct for YOUR project!          **
!
autotape=2
srccat /
!! Target:  GJ686 RA=17:37:53.3470 DEC=+18:35:30.152
!! Primary cal:  J1742+1904, 1.1 deg, 130 mJy, K-Vera
!! Secondary cal:  J1745+1814, 1.9, 160, C-VCS5
!! Secondary cal:  J1731+1749, 1.7, 30, VLA-A  !! TOO WEAK !! DO NOT USE
SOURCE=GJ686 RA=17:37:53.3470 DEC=+18:35:30.152 EPOCH=2000.0 EQUINOX=J2000 PMRA=926.840000 PMDEC=983.180000 /
!! PARALAX=123.020000 /
SOURCE=J1731+1749 RA=17:31:12.88281 DEC=+17:49:52.8347 EQUINOX=J2000 /
!! +/- (0.000294, 0.002976) VLA-A, 0.034 Jy, 20070714


!! Target:  GJ1224 RA=18:07:32.8500 DEC=-15:57:47.099 
!! Primary cal:   J1805-1408 
!! Secondary cal:  J1809-1547
SOURCE=GJ1224 RA=18:07:32.8500 DEC=-15:57:47.099 EPOCH=2000.0 EQUINOX=J2000 PMRA=-617.000000 PMDEC=-342.000000 /
!! PARALAX=132.600000 /
SOURCE=J1809-1547 RA=18:09:09.005 DEC=-15:47:04.0612 EQUINOX=J2000 /
!! +/- (0.000355, 0.009009) VLA-A, 0.034 Jy, 20070714


endcat /
!
!
srcfile  = '$SCHED/catalogs/sources.vlba'
stafile  = '$SCHED/catalogs/stations.dat'


stations = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA,
           VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK, GBT_VLBA

sumitem=el1,dwell,tape1,tape2

minpause=20
!------------------------------------------------
setup='$SCHED/setups/v4cm-512-8-2.set' 

year=2008
month=4
day=23
start=06:15:00


!! first fringe finder
source='J1743-0350' dur=00:08:00 /


!! pointing at GBT
comment='GBT pointing scan.'  peak=1
stations =  gbt_vlba
source = 'J1743-0350'  dwell = 08:00  vlamode='VA' norecord /
nopeak
record
stations = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA,
           VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK, GBT_VLBA


!! GJ686 block 1/8
!! secondary calibrators
source='J1742+1904' dwell=00:00:40 /
source='J1745+1814' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J1742+1904' dur=00:01:10 /
source='GJ686' dur=00:03:00 / 
!! secondary calibrators
source='J1742+1904' dur=00:01:10 /
source='J1745+1814' dur=00:01:10 /


!! GJ686 block 2/8
!! secondary calibrators
source='J1742+1904' dwell=00:00:40 /
source='J1745+1814' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J1742+1904' dur=00:01:10 /
source='GJ686' dur=00:03:00 / 
!! secondary calibrators
source='J1742+1904' dur=00:01:10 /
source='J1745+1814' dur=00:01:10 /


!! GJ686 block 3/8
!! secondary calibrators
source='J1742+1904' dwell=00:00:40 /
source='J1745+1814' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J1742+1904' dur=00:01:10 /
source='GJ686' dur=00:03:00 / 
!! secondary calibrators
source='J1742+1904' dur=00:01:10 /
source='J1745+1814' dur=00:01:10 /
source='J1742+1904' dur=00:01:10 /


!! GJ1224 block 1/8
!! secondary calibrators
source='J1805-1408' dwell=00:00:40 /
source='J1753-1843' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J1805-1408' dur=00:01:10 /
source='GJ1224' dur=00:03:00 / 
!! secondary calibrators
source='J1805-1408' dur=00:01:10 /
source='J1753-1843' dur=00:01:10 /
source='J1805-1408' dur=00:01:10 /


!! GJ686 block 4/8
!! secondary calibrators
source='J1742+1904' dwell=00:00:40 /
source='J1745+1814' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J1742+1904' dur=00:01:10 /
source='GJ686' dur=00:03:00 / 
!! secondary calibrators
source='J1742+1904' dur=00:01:10 /
source='J1745+1814' dur=00:01:10 /
source='J1742+1904' dur=00:01:10 /


!! GJ1224 block 2/8
!! secondary calibrators
source='J1805-1408' dwell=00:00:40 /
source='J1753-1843' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J1805-1408' dur=00:01:10 /
source='GJ1224' dur=00:03:00 / 
!! secondary calibrators
source='J1805-1408' dur=00:01:10 /
source='J1753-1843' dur=00:01:10 /
source='J1805-1408' dur=00:01:10 /


!! GJ686 block 5/8
!! secondary calibrators
source='J1742+1904' dwell=00:00:40 /
source='J1745+1814' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J1742+1904' dur=00:01:10 /
source='GJ686' dur=00:03:00 / 
!! secondary calibrators
source='J1742+1904' dur=00:01:10 /
source='J1745+1814' dur=00:01:10 /
source='J1742+1904' dur=00:01:10 /


!! GJ1224 block 3/8
!! secondary calibrators
source='J1805-1408' dwell=00:00:40 /
source='J1753-1843' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J1805-1408' dur=00:01:10 /
source='GJ1224' dur=00:03:00 / 
!! secondary calibrators
source='J1805-1408' dur=00:01:10 /
source='J1753-1843' dur=00:01:10 /
source='J1805-1408' dur=00:01:10 /


!! pointing at GBT
comment='GBT pointing scan.'  peak=1
stations =  gbt_vlba
source = 'J1743-0350'  dwell = 08:00  vlamode='VA' norecord /
nopeak
record
stations = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA,
           VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK, GBT_VLBA


!! fringe finder
source='J1743-0350' dwell=00:02:00 /


!! GJ686 block 6/8
!! secondary calibrators
source='J1742+1904' dwell=00:00:40 /
source='J1745+1814' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J1742+1904' dur=00:01:10 /
source='GJ686' dur=00:03:00 / 
!! secondary calibrators
source='J1742+1904' dur=00:01:10 /
source='J1745+1814' dur=00:01:10 /
source='J1742+1904' dur=00:01:10 /


!! GJ1224 block 4/8
!! secondary calibrators
source='J1805-1408' dwell=00:00:40 /
source='J1753-1843' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J1805-1408' dur=00:01:10 /
source='GJ1224' dur=00:03:00 / 
!! secondary calibrators
source='J1805-1408' dur=00:01:10 /
source='J1753-1843' dur=00:01:10 /
source='J1805-1408' dur=00:01:10 /


!! GJ686 block 7/8
!! secondary calibrators
source='J1742+1904' dwell=00:00:40 /
source='J1745+1814' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J1742+1904' dur=00:01:10 /
source='GJ686' dur=00:03:00 / 
!! secondary calibrators
source='J1742+1904' dur=00:01:10 /
source='J1745+1814' dur=00:01:10 /
source='J1742+1904' dur=00:01:10 /


!! GJ1224 block 5/8
!! secondary calibrators
source='J1805-1408' dwell=00:00:40 /
source='J1753-1843' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J1805-1408' dur=00:01:10 /
source='GJ1224' dur=00:03:00 / 
!! secondary calibrators
source='J1805-1408' dur=00:01:10 /
source='J1753-1843' dur=00:01:10 /
source='J1805-1408' dur=00:01:10 /


!! fringe finder
source='J1733-1304' dwell=00:02:00 /


!! GJ686 block 8/8
!! secondary calibrators
source='J1742+1904' dwell=00:00:40 /
source='J1745+1814' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J1742+1904' dur=00:01:10 /
source='GJ686' dur=00:03:00 / 
!! secondary calibrators
source='J1742+1904' dur=00:01:10 /
source='J1745+1814' dur=00:01:10 /
source='J1742+1904' dur=00:01:10 /


!! GJ1224 block 6/8
!! secondary calibrators
source='J1805-1408' dwell=00:00:40 /
source='J1753-1843' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J1805-1408' dur=00:01:10 /
source='GJ1224' dur=00:03:00 / 
!! secondary calibrators
source='J1805-1408' dur=00:01:10 /
source='J1753-1843' dur=00:01:10 /


!! GJ1224 block 7/8
!! secondary calibrators
source='J1805-1408' dwell=00:00:40 /
source='J1753-1843' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J1805-1408' dur=00:01:10 /
source='GJ1224' dur=00:03:00 / 
!! secondary calibrators
source='J1805-1408' dur=00:01:10 /
source='J1753-1843' dur=00:01:10 /


!! GJ1224 block 8/8
!! secondary calibrators
source='J1805-1408' dwell=00:00:40 /
source='J1753-1843' dur=00:01:10 /
!! main loop 
group=2 repeat=8 
source='J1805-1408' dur=00:01:10 /
source='GJ1224' dur=00:03:00 / 
!! secondary calibrators
source='J1805-1408' dur=00:01:10 /
source='J1753-1843' dur=00:01:10 /
source='J1805-1408' dur=00:01:10 /


!! fringe finder
!!source='J1733-1304' dwell=00:02:00 /