overwrite
! 
!dosta'kp'
!
!
! ==========================================================
! =================  Cover Information  ====================
! ==========================================================
!
expt     = 'RIPL:  GJ4360/GJ65A'
expcode  = 'BB240AA'
version  = 1
piname   = 'Geoffrey Bower'
address1 = '601 Campbell Hall'
address2 = 'UC Berkeley Astronomy'
address3 = 'Berkeley CA 94720'
phone    = '510 643-4704'
obsphone = '510 847-1722'
fax      = '510 642 3411'
! telex    = ' '
email    = 'gbower@astro.berkeley.edu'
obsmode  = 'VLBA 512-8-2 4cm'
obstype  = 'VLBA'
note1   = ''
note2   = ''
!
! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================
correl   = 'Socorro'
coravg   = 0.26
corchan  = 16
cornant  = 11
corpol   = 'off'
corwtfn  = 'uniform'
corsrcs  = 'standard'
cortape  = FTP
corship1 = 'Geoffrey Bower'
corship2 = '601 Campbell Hall'
corship3 = 'UC Berkeley Astronomy'
corship4 = 'Berkeley CA 94720'
!
! ================================================================
!   Preferred Dynamic Contraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           o   o   o   o   o   o   o   o   o   o
!       Minimum number of stations [9 (6 for 3mm)]: 9
!       May we swap PT for a single VLA antenna? [yes] no
!          Consult http://www.aoc.nrao.edu/~gtaylor/y1gotcha.html
!          to decide.  If you adopt the default, then both PT and
!          VLA1 must be in the stations list in the keyin file.
!    Bands and polarizations.  Below each band code, insert "R" 
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual 
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!           90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!                                         d     
! Weather constraints:
!    [appropriate for bands marked "L", "R", or "d" above
!     and for at least the minimum number of stations]
! Date constraints:
!    Preferred date(s), usually a series start [none]: 
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days [none]:  3 days 
!    Special conditions (e.g., a series with different
!       spacings in time) [none]: Groups of (a,b,c), (d,e,f), (g,h,i), and
!       (j,k,l) are independent.  Each group consists of three identical epochs.
!	Each epoch of a group should be observed
!       within 10 days.
! ================================================================
!
! ==========================================================
! =================== Tape initialization  =================
! ==========================================================
!**  WARNING: Check with data analysts that the following tape  **
!**           information is correct for YOUR project!          **
!
autotape=2
srccat /




!! Target:  GJ4360
!! Primary cal: J2345-1555  VCS-4
!! Secondary cal: J2348-1631  VCS-ICRF
SOURCE=GJ4360 RA=23:45:31.27 DEC=-16:10:19.3 EQUINOX=J2000 EPOCH=2000.0 PMRA=-395 PMDEC=-558  /
!! PARALAX=??

!! Target:  GJ65 RA=01:39:01.5401 DEC=-17:57:01.800
!! Primary cal:  J0132-1654, 1.8 deg, 230 mJy, C-ICRF
!! Secondary cal:  J0142-1633, 0.6, 58, VLA-A
SOURCE=GJ65A RA=01:39:01.5401 DEC=-17:57:01.800 EPOCH=2000.0 EQUINOX=J2000 PMRA=3296.000000 PMDEC=563.000000 /
!! PARALAX=373.700000 /
SOURCE=J0142-1633 RA=01:42:45.26120 DEC=-16:33:07.1969 EQUINOX=J2000 /
!! VLBA BB222




endcat /
!
!
srcfile  = '$SCHED/catalogs/sources.vlba'
stafile  = '$SCHED/catalogs/stations.dat'

stations = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA,
           VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK, GBT_VLBA

sumitem=el1,dwell,tape1,tape2

minpause=20
!------------------------------------------------
setup='$SCHED/setups/v4cm-512-8-2.set' 

year=2008
month=4
day=15
start=12:45:00


!! first fringe finder
source='3C454.3' dur=00:08:00 /


!! pointing at GBT
comment='GBT pointing scan.'  peak=1
stations =  gbt_vlba
source = '3C454.3'  dwell = 08:00  vlamode='VA' norecord /
nopeak
record
stations = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA,
           VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK, GBT_VLBA


!! GJ4360 block 1/9
!! secondary calibrators
source='J2345-1555' dwell=00:00:40 /
source='J2348-1631' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J2345-1555' dur=00:01:10 /
source='GJ4360' dur=00:03:00 / 
!! secondary calibrators
source='J2345-1555' dur=00:01:10 /
source='J2348-1631' dur=00:01:10 /


!! GJ4360 block 2/9
!! secondary calibrators
source='J2345-1555' dwell=00:00:40 /
source='J2348-1631' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J2345-1555' dur=00:01:10 /
source='GJ4360' dur=00:03:00 / 
!! secondary calibrators
source='J2345-1555' dur=00:01:10 /
source='J2348-1631' dur=00:01:10 /


!! GJ4360 block 3/9
!! secondary calibrators
source='J2345-1555' dwell=00:00:40 /
source='J2348-1631' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J2345-1555' dur=00:01:10 /
source='GJ4360' dur=00:03:00 / 
!! secondary calibrators
source='J2345-1555' dur=00:01:10 /
source='J2348-1631' dur=00:01:10 /


!! GJ4360 block 4/9
!! secondary calibrators
source='J2345-1555' dwell=00:00:40 /
source='J2348-1631' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J2345-1555' dur=00:01:10 /
source='GJ4360' dur=00:03:00 / 
!! secondary calibrators
source='J2345-1555' dur=00:01:10 /
source='J2348-1631' dur=00:01:10 /


!! GJ4360 block 5/9
!! secondary calibrators
source='J2345-1555' dwell=00:00:40 /
source='J2348-1631' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J2345-1555' dur=00:01:10 /
source='GJ4360' dur=00:03:00 / 
!! secondary calibrators
source='J2345-1555' dur=00:01:10 /
source='J2348-1631' dur=00:01:10 /


!! GJ4360 block 6/9
!! secondary calibrators
source='J2345-1555' dwell=00:00:40 /
source='J2348-1631' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J2345-1555' dur=00:01:10 /
source='GJ4360' dur=00:03:00 / 
!! secondary calibrators
source='J2345-1555' dur=00:01:10 /
source='J2348-1631' dur=00:01:10 /


!! GJ4360 block 7/9
!! secondary calibrators
source='J2345-1555' dwell=00:00:40 /
source='J2348-1631' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J2345-1555' dur=00:01:10 /
source='GJ4360' dur=00:03:00 / 
!! secondary calibrators
source='J2345-1555' dur=00:01:10 /
source='J2348-1631' dur=00:01:10 /
source='J2345-1555' dur=00:01:10 /


!! GJ65A block 1/8
!! secondary calibrators
source='J0132-1654' dwell=00:00:40 /
source='J0142-1633' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J0132-1654' dur=00:01:10 /
source='GJ65A' dur=00:03:00 / 
!! secondary calibrators
source='J0132-1654' dur=00:01:10 /
source='J0142-1633' dur=00:01:10 /


!! GJ65A block 2/8
!! secondary calibrators
source='J0132-1654' dwell=00:00:40 /
source='J0142-1633' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J0132-1654' dur=00:01:10 /
source='GJ65A' dur=00:03:00 / 
!! secondary calibrators
source='J0132-1654' dur=00:01:10 /
source='J0142-1633' dur=00:01:10 /
source='J0132-1654' dur=00:01:10 /


!! pointing at GBT
comment='GBT pointing scan.'  peak=1
stations =  gbt_vlba
source = '3C454.3'  dwell = 08:00  vlamode='VA' norecord /
nopeak
record
stations = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA,
           VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK, GBT_VLBA


!! fringe finder
source='3C454.3' dwell=00:02:00 /


!! GJ4360 block 8/9
!! secondary calibrators
source='J2345-1555' dwell=00:00:40 /
source='J2348-1631' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J2345-1555' dur=00:01:10 /
source='GJ4360' dur=00:03:00 / 
!! secondary calibrators
source='J2345-1555' dur=00:01:10 /
source='J2348-1631' dur=00:01:10 /
source='J2345-1555' dur=00:01:10 /


!! GJ65A block 3/8
!! secondary calibrators
source='J0132-1654' dwell=00:00:40 /
source='J0142-1633' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J0132-1654' dur=00:01:10 /
source='GJ65A' dur=00:03:00 / 
!! secondary calibrators
source='J0132-1654' dur=00:01:10 /
source='J0142-1633' dur=00:01:10 /
source='J0132-1654' dur=00:01:10 /


!! GJ4360 block 9/9
!! secondary calibrators
source='J2345-1555' dwell=00:00:40 /
source='J2348-1631' dur=00:01:10 /
!! main loop 
group=2 repeat=4 
source='J2345-1555' dur=00:01:10 /
source='GJ4360' dur=00:03:00 / 
!! secondary calibrators
source='J2345-1555' dur=00:01:10 /
source='J2348-1631' dur=00:01:10 /
source='J2345-1555' dur=00:01:10 /


!! GJ65A block 4/8
!! secondary calibrators
source='J0132-1654' dwell=00:00:40 /
source='J0142-1633' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J0132-1654' dur=00:01:10 /
source='GJ65A' dur=00:03:00 / 
!! secondary calibrators
source='J0132-1654' dur=00:01:10 /
source='J0142-1633' dur=00:01:10 /
source='J0132-1654' dur=00:01:10 /


!! fringe finder
source='J0237+2848' dwell=00:02:00 /


!! GJ65A block 5/8
!! secondary calibrators
source='J0132-1654' dwell=00:00:40 /
source='J0142-1633' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J0132-1654' dur=00:01:10 /
source='GJ65A' dur=00:03:00 / 
!! secondary calibrators
source='J0132-1654' dur=00:01:10 /
source='J0142-1633' dur=00:01:10 /


!! GJ65A block 6/8
!! secondary calibrators
source='J0132-1654' dwell=00:00:40 /
source='J0142-1633' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J0132-1654' dur=00:01:10 /
source='GJ65A' dur=00:03:00 / 
!! secondary calibrators
source='J0132-1654' dur=00:01:10 /
source='J0142-1633' dur=00:01:10 /


!! GJ65A block 7/8
!! secondary calibrators
source='J0132-1654' dwell=00:00:40 /
source='J0142-1633' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J0132-1654' dur=00:01:10 /
source='GJ65A' dur=00:03:00 / 
!! secondary calibrators
source='J0132-1654' dur=00:01:10 /
source='J0142-1633' dur=00:01:10 /


!! GJ65A block 8/8
!! secondary calibrators
source='J0132-1654' dwell=00:00:40 /
source='J0142-1633' dur=00:01:10 /
!! main loop 
group=2 repeat=5 
source='J0132-1654' dur=00:01:10 /
source='GJ65A' dur=00:03:00 / 
!! secondary calibrators
source='J0132-1654' dur=00:01:10 /
source='J0142-1633' dur=00:01:10 /
!!source='J0132-1654' dur=00:01:10 /