!
! ================================================================
!   Preferred Dynamic Constraints. 
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           o   o   o   r   r   r   r   r   o   o
!     
!       ***Additionally, Y1 is required***
!       Minimum number of stations [6]:
!       May we swap PT for a single VLA antenna? [no]
!          Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html
!          to decide.  If you adopt the default, then both PT and
!          VLA1 must be in the stations list in the keyin file.
!    Bands and polarizations.  Below each band code, insert "R" 
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual 
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!           90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!                       d            d    d
! Weather constraints: 
!    [None]
! Date constraints:
!    Preferred date(s), usually a series start [none]:
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days [none]:
!    Special conditions (e.g., a series with different
!       spacings in time) [none]:
! ================================================================
!
overwrite
autotape=2
sumitem=slew, tape1

! ==========================================================
! =================  Cover Information  ====================
! ==========================================================

version = 1
EXPT     = 'BD121 Cyg OB2 N9 obs'
EXPCODE  = 'BD121'
PINAME   = 'Dougherty'
ADDRESS1 = 'DRAO  Box 248'
ADDRESS2 = 'Penticton BC V2A 6J9'
ADDRESS3 = 'Canada'
PHONE    = '2504932277'
OBSPHONE = '2504976003 or 2504880067'
FAX      = '2504937767'
EMAIL    = 'sean.dougherty@nrc.ca'
OBSMODE  = 'standard'
OBSTYPE  = 'VLBA'

overwrit 
correl   = 'Socorro'
coravg   = 2
corchan  = 16
cornant  = 11
corpol   = 'off'
corwtfn  = 'uniform'
corsrcs  = 'Schedule'
cortape  = DAT
corship1 = 'Sean Dougherty'
corship2 = 'DRAO Box 248'
corship3 = 'Penticton BC V2A 6J9 Canada'
cornote1 = ''

srcfile  = $SCHED/catalogs/sources.vlba
stafile  = $SCHED/catalogs/stations.dat

srccat /
!source='WR146'  ra=20:35:47.865   dec= 41:22:44.760  equinox='J2000' /
source='CYGOB2N9'   ra=20:33:10.7355  dec=41:15:08.221 equinox='J2000' /
endcat /

setinit = 4cmgd.set /
  nchan    = 4
  bits     = 2
  bbfilter = 16.0
  freqref  = 8416.49
  freqoff  = 0.0, 52.0, 273.0, 442.0
  netside  = U, U, U, U
  pol      = lcp
 /
  Station = VLA1
  nchan   = 4
  ifchan  = C,C,D,D
!  freqoff = 0.0, 0.0, 442.0, 442.0
  firstlo = 9060.1,9060.1, 9489.9,9489.9
  vlaband = VX    vlafeab = 13.4  vlasyna = 3939.9  flukea = 100.0
  vlabw = '0000'  vlafecd = 13.4  vlasynb = 3510.1  flukeb = 200.0
  fefilter = '0000'
  /
endset / 

! ==========================================================
! ========================  The Scans  =====================
! ==========================================================

!LST=VLBA_PT
YEAR   = 2007
MONTH  = 04
DAY    = 21
START  = 07:30:00


STATIONS = VLBA_OV,VLBA_BR,VLBA_MK,VLBA_KP,VLBA_LA,VLBA_PT,
           VLBA_FD,VLBA_NL,VLBA_HN,VLBA_SC,VLA1
!stations = vla1

!record=0
vlamode 'vs' ! Single dish VLA 

minpause=01:30

!beginning              Atmosphere calibration at X
setup = '4cmgd.set'
group 8 repeat 2
source = 'J1507-16'    dwell = 00:30 /
source = 'J1337-12'    dwell = 00:30 /
source = 'J1354-02'    dwell = 00:30 /
source = 'J1504+10'    dwell = 00:30 /
source = 'J1357+19'    dwell = 00:30 /
source = 'J1613+34'    dwell = 00:30 / 
source = 'J1419+54'    dwell = 00:30 /
source = 'J1357+76'    dwell = 00:30 /

!
setup= '$SCHED/setups/v18cm-256-8-2.set'
gap=2:00 /
group 10 repeat 4
source = 'J2015+3710'  dwell = 00:30 gap=0:00/
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2007+4029'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2052+3635'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /

!
setup= '$SCHED/setups/v6cm-256-8-2.set'
gap=2:00 /
group 10 repeat 4
source = 'J2015+3710'  dwell = 00:30 gap=0:00/
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2007+4029'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2052+3635'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /

!
setup= '$SCHED/setups/v4cm-256-8-2.set'
gap=2:00 /
group 10 repeat 4
source = 'J2015+3710'  dwell = 00:30 gap = 0:00/
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2007+4029'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2052+3635'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /

!
setup= '$SCHED/setups/v18cm-256-8-2.set'
gap=2:00 /
group 10 repeat 4
source = 'J2015+3710'  dwell = 00:30 gap=0:00/
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2007+4029'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2052+3635'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /


!middle              Atmosphere calibration at X
setup = '4cmgd.set'
gap=2:00 /
group 8 repeat 2
source = 'J2005+77'    dwell = 00:30 /
source = 'J1849+67'    dwell = 00:30 /
source = 'J1824+56'    dwell = 00:30 /
source = 'J2038+51'    dwell = 00:30 /
source = 'J1931+22'    dwell = 00:30 /
source = 'J1751+09'    dwell = 00:30 /
source = 'J1743-03'    dwell = 00:30 /
source = 'J1939-15'    dwell = 00:30 /
!

!
setup= '$SCHED/setups/v6cm-256-8-2.set'
gap=2:00 /
group 10 repeat 4
source = 'J2015+3710'  dwell = 00:30 gap=0:00/
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2007+4029'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2052+3635'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /

!
setup= '$SCHED/setups/v4cm-256-8-2.set'
gap=2:00 /
group 10 repeat 4
source = 'J2015+3710'  dwell = 00:30 gap=0:00/
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2007+4029'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2052+3635'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /

!
setup= '$SCHED/setups/v18cm-256-8-2.set'
gap=2:00 /
group 10 repeat 4
source = 'J2015+3710'  dwell = 00:30 gap = 0:00/
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2007+4029'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2052+3635'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /

!
setup= '$SCHED/setups/v6cm-256-8-2.set'
gap=2:00 /
group 10 repeat 3
source = 'J2015+3710'  dwell = 00:30 gap=0:00/
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2007+4029'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2052+3635'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /

!
setup= '$SCHED/setups/v4cm-256-8-2.set'
gap=2:00 /
group 10 repeat 3
source = 'J2015+3710'  dwell = 00:30 gap=0:00/
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2007+4029'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2052+3635'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /

setup= '$SCHED/setups/v6cm-256-8-2.set'
gap=2:00 /
group 10 repeat 1
source = 'J2015+3710'  dwell = 00:30 gap=0:00/
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'CYGOB2N9'       dwell = 02:00 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2007+4029'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /
source = 'J2052+3635'  dwell = 00:30 /
source = 'J2015+3710'  dwell = 00:30 /


! end              Atmosphere calibration

setup = '4cmgd.set'
group 8 repeat 2
source = 'J0017+81'    dwell = 00:30 /
source = 'J0228+67'    dwell = 00:30 /
source = 'J0102+58'    dwell = 00:30 /
source = 'J0136+47'    dwell = 00:30 /
source = 'J0336+32'    dwell = 00:30 /
source = 'J0152+22'    dwell = 00:30 /
source = 'J0010+10'    dwell = 00:30 /
source = 'J0108+01'    dwell = 00:30 /
source = 'J0006-06'    dwell = 00:30 /
!!