! Must have $SCHED variable set ! ************************************************************************ ! ! SCHED command file for dynamic scheduling of ! VLBA Experiment BL139 (Segments A, B, C, D) ! ------------------------------------------------------------------------ ! ! ************************************************************************ ! ! ================================================================ ! Preferred Dynamic Constraints. Alter [defaults] as desired. ! ================================================================ ! Equipment constraints: ! Stations. Below each station code, the "o" indicates an ! [optional] station that is to be used if it is available. ! Change "o" to "r" if the station is required or change ! "o" to "n" if the station is not to be used. ! SC HN NL FD LA PT KP OV BR MK ! o r r r r r r r r r ! Minimum number of stations: [9] ! May we swap PT for a single VLA antenna? [no] ! Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html ! to decide. If you adopt the default, then both PT and ! VLA1 must be in the stations list in the keyin file. ! Bands and polarizations. Below each band code, insert "R" ! if the righthand polarization is to be used, "L" if the ! lefthand polarization is to be used, "d" if dual ! polarizations are to be used, or "o" if the band is in ! your setups but scheduling should not be constrained by ! its availability. ! 90cm 50cm 20cm 13cm 6cm 4cm 2cm 1cm 7mm 3mm ! d d d ! Weather constraints: ! [appropriate for bands marked "L", "R", or "d" above ! and for at least the minimum number of stations] ! Date constraints: ! Preferred date(s), usually a series start [none]: ! Excluded dates plus reason [none]: ! Preferred interval between segments in days [120]: ! Special conditions (e.g., a series with different ! spacings in time) [none]: ! ================================================================ overwrit ! tape initialization stuff ********************************************** tapeini / obscode ='default' tpsta ='vlba', 'vla1', 'vla27', 'eb_vlba', 'gb_vlba', 'default' tpdrive =1, 1, 1, 1, 1, 1 tpindex =1, 1, 1, 1, 1, 1 tplength=17600, 17600, 17600, 17600, 17600, 8800 ndrives =2, 2, 2, 1, 1, 1 nheadpos=14, 14, 14, 14, 14, 14 density =H, H, H, H, H, L / ! standard catalogs ****************************************************** ! Uncomment the following 2 lines, if running this schedule at the AOC !srcfile = /home/arana/cwalker/sched/catalogs/sources.vlba !stafile = /home/arana/cwalker/sched/catalogs/stations.dat ! ! Will not specify the station information manually. ! Comment out the following 2 lines, if running this schedule at the AOC srcfile = $SCHED/catalogs/sources.vlba stafile = $SCHED/catalogs/stations.dat ! ! ! Project information *************************************************** ! expt = '3C390.3 -- 15, 22, 43GHz: compact jet monitoring' expcode = 'BL139B' version = 1 piname = 'Andrei Lobanov' address1 = 'MPIfR' address2 = 'Auf dem Hugel 69' address3 = 'D-53121 Bonn, GERMANY' fax = '+49 228 525 295' phone = '+49 228 525 229' obsphone = '+49 228 525 295' email = 'internet: alobanov@mpifr-bonn.mpg.de' obsmode = 'VLBA' obstype = 'VLBA' note1 = '1. Amplitude check: J1638+5720. FF/EVPA Cal: J2202+4216.' note2 = '2. D-term Cal: J1935+8130 (Taylor & Peck 2003, ApJ, 597, 157) note3 = '3. Minimum antenna number = 9. Least critical antenna: SC.' note4 = '4. Weather conditions: good or fair for 22GHz. ! !Correlator information ************************************************* correl = 'socorro' coravg = 2 corchan = 16 cornant = 10 corpol = 'on' corsrcs = 'STANDARD' corship1 = 'Andrei Lobanov corship2 = 'MPIfR, Auf dem Huegel 69' corship3 = 'D-53121 Bonn' corship4 = 'GERMANY' cortape = 'DAT' corwtfn = 'UNIFORM' ! ! ! Begin schedule ******************************************************** ! autotape=2 ! Duration: Total = 8 hours (centered at LST=18:30, at VLBA_PT) LST=VLBA_PT ! Arbitrary date. Change as required. YEAR = 2006 DAY = 60568 !MONTH = 01 DAY = 01 ! 'VLBA' will make vlba files. dosta 'VLBA' STATIONS = VLBA_FD,VLBA_HN,VLBA_NL,VLBA_OV,VLBA_PT,VLBA_BR,VLBA_KP, VLBA_MK,VLBA_SC,VLBA_LA ! Start time LST=14:30 (at VLBA_PT) START=14:30:00 SETUP = '$SCHED/setups/ ! Amp Cal Scan # 01 SOURCE='J1638+5720' GAP=0:00 DUR=3:00 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / SOURCE='J1638+5720' GAP=0:00 DUR=3:30 SETUP = '$SCHED/setups/v1cm-128-8-1.set' / SOURCE='J1638+5720' GAP=0:00 DUR=4:30 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / ! Main Block # 01 GROUP=14 REPEAT=3 ! DT Cal Scans # 01 - 03 SOURCE='J1935+8130' GAP=2:00 DUR=3:00 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / SOURCE='J1935+8130' GAP=0:00 DUR=3:30 SETUP = '$SCHED/setups/v1cm-128-8-1.set' / SOURCE='J1935+8130' GAP=0:00 DUR=4:30 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / ! Target Scans # 01 - 06 SOURCE='J1842+7946' GAP=1:00 DUR=5:45 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=3:45 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=5:45 SETUP = '$SCHED/setups/v1cm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=5:45 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / ! SOURCE='J1842+7946' GAP=0:00 DUR=3:45 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=5:45 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=5:45 SETUP = '$SCHED/setups/v1cm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=5:45 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / ! FF/EV Cal Scans # 01 - 03 SOURCE='J1751+0939' GAP=2:05 DUR=2:55 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / SOURCE='J1751+0939' GAP=0:00 DUR=3:30 SETUP = '$SCHED/setups/v1cm-128-8-1.set' / SOURCE='J1751+0939' GAP=0:00 DUR=4:30 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / ! End Main Block # 01 ! Amp Cal Scan # 02 SOURCE='J1638+5720' GAP=0:00 DUR=3:00 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / SOURCE='J1638+5720' GAP=0:00 DUR=3:30 SETUP = '$SCHED/setups/v1cm-128-8-1.set' / SOURCE='J1638+5720' GAP=0:00 DUR=4:30 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / ! Main Block # 02 GROUP=14 REPEAT=3 ! DT Cal Scans # 04 - 06 SOURCE='J1935+8130' GAP=2:00 DUR=3:00 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / SOURCE='J1935+8130' GAP=0:00 DUR=3:30 SETUP = '$SCHED/setups/v1cm-128-8-1.set' / SOURCE='J1935+8130' GAP=0:00 DUR=4:30 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / ! Target Scans # 07 - 12 SOURCE='J1842+7946' GAP=1:00 DUR=5:45 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=3:45 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=5:45 SETUP = '$SCHED/setups/v1cm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=5:45 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / ! SOURCE='J1842+7946' GAP=0:00 DUR=3:45 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=5:45 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=5:45 SETUP = '$SCHED/setups/v1cm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=5:45 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / ! FF/EV Cal Scans # 04 - 06 SOURCE='J1751+0939' GAP=2:05 DUR=2:55 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / SOURCE='J1751+0939' GAP=0:00 DUR=3:30 SETUP = '$SCHED/setups/v1cm-128-8-1.set' / SOURCE='J1751+0939' GAP=0:00 DUR=4:30 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / ! End Main Block # 02 ! Target Scans # 13 - 14 SOURCE='J1842+7946' GAP=2:00 DUR=5:45 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=3:45 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=5:45 SETUP = '$SCHED/setups/v1cm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=5:45 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / ! SOURCE='J1842+7946' GAP=0:00 DUR=3:45 SETUP = '$SCHED/setups/v2cm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=5:45 SETUP = '$SCHED/setups/v7mm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=5:45 SETUP = '$SCHED/setups/v1cm-128-8-1.set' / SOURCE='J1842+7946' GAP=0:00 DUR=5:45 SETUP = '$SCHED/setups/v7mm-128-8-1.set' /