! --------------------------------------------------------
! File B164A.key at 256 MBPS  --  J1826+18
!
! Continuum observing at 4 and 6cm -- special frequencies
!
! Polarization required
!  3C279 may be used as fringe finder.
!
! ================================================================
!   Preferred Dynamic Contraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           o   r   r   r   r   r   r   r   r   r
!       Minimum number of stations [9 (6 for 3mm)]:9
!       May we swap PT for a single VLA antenna? [NO]
!    Bands and polarizations.  Below each band code, insert "R"
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!           90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!                                    d    d    
! Weather constraints:
!    [appropriate for bands marked "L", "R", or "d" above
!     and for at least the minimum number of stations]
! Date constraints:
!    Preferred date(s), usually a series start [none]:
!    Excluded dates plus reason [none]: 
!    Preferred interval between segments in days [none]: 
!    Special conditions (e.g., a series with different
!       spacings in time) [none]:
!
! ==========================================================
! ==================  Program control  =====================
! ==========================================================
!
overwrit    ! To overwrite previous control files.
autotape=2  ! Automatic tape allocation for VLBA stations.
sumitem  = el1, dwell  ! Summary file items.
!sumitem  = el1, dwell  ! Summary file items.

!
! ==========================================================
! =================  Cover Information  ====================
! ==========================================================
!
version  = 1
expcode  = BG164A
expt     = 'Rotation measure imaging of the CSO J1826+18' 
obstype  = VLBA
PINAME   = 'Nicole Gugliucci'
ADDRESS1 = 'Dept. of Astronomy, University of Virginia'
ADDRESS2 = '530 McCormick Road, Charlottesville, VA 22903'
PHONE    = '(434) 924 7491 (work); (917) 992 5890 (home)'
OBSPHONE = '(917) 992 5890'
FAX      = '(434) 924 3104'
EMAIL    = 'neg9j@virginia.edu'
OBSMODE  = 'VLBA 256-8-2 at 2cm, 4cm, and 6cm'
OBSTYPE  = 'VLBA'
CORREL   = 'SOCORRO'
note1     = 'Fringe finder and EVPA cal #1: 3C279'
note2     = 'Pol. EVPA cal #2: J2136+00'
note3     = 'Pol. EVPA cal #3: J1310+3220'
note4     = 'Pol. D-term cal: OQ208'

!
! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================
 
correl    = 'Socorro'
coravg    = 2
corchan   = 16
cornant   = 10
corpol    = 'on'
corwtfn   = 'uniform'
corsrcs   = 'schedule'
cortape   = FTP		! This might be easier? -NG
corship1  = 'Nicole Gugliucci'
corship2  = 'UVA'
corship3  = 'Virginia'
cornote1  = ''

!
! ==========================================================
! ======= Standard Source and Station Catalogs  ============
! ==========================================================
!  These are sched defaults so they are not really needed.

stafile  = $SCHED/catalogs/stations.dat
srcfile  = $SCHED/catalogs/sources.vlba
freqfile = $SCHED/catalogs/freq.dat

! ================================================================
!       In line source catalog.
!
! Polarization calibrators:
!  D-term (6-8 scans):
!   OQ208 (1404+286)     [in standard source catalog]
!  EVPA (2-3 scans):
!   2136+00 (J2136+0041)
!   J1310+3220           [in standard source catalog]
!
! Other calibrators:
!  Fringe finder = 3C279 (J1256-0547)     [in standard source catalog]
!
! ================================================================
srccat /
source = 'J0000+40' ra=00:00:53.0815 dec=40:54:01.806 equinox='J2000' /
source = 'J1826+18' ra=18:26:17.7118 dec=18:31:52.915 equinox='J2000' /
SOURCE='J2136+0041','2134+00','2134+004','J2136+00'
     RA=21:36:38.5863270 DEC=  00:41:54.213010 RAERR=   0.300 DECERR=   0.210 CALCODE='V' /
SOURCE='J1407+2827','1404+286','J1407+28','OQ208'
     RA=14:07:00.3944100 DEC=  28:27:14.689980 CALCODE='N' 
     REMARKS='ICRF - Ext.1 Source - 1998 IERS Annual Report' /
SOURCE='J1256-0547','1253-055','3C279','J1256-05'
     RA=12:56:11.1665602 DEC= -05:47:21.524580 CALCODE='N' 
     REMARKS='ICRF - Ext.1 Source - 1998 IERS Annual Report' /
SOURCE='J1310+3220','1308+326','J1310+32'
     RA=13:10:28.6638451 DEC=  32:20:43.782951 CALCODE='N' 
     REMARKS='ICRF - Ext.1 Source - 1998 IERS Annual Report' /
endcat /

!
! ==========================================================
! ================= Frequency setups  ======================
! ==========================================================

setinit = rm6cmv.set /
! NON STANDARD setup invented by Greg Taylor on 9/15/2002
! Modified by Nicole Gugliucci 2/2006
! based on...
! Standard setup file: v6cm-256-8-2.set                        
!     (Produced by MAKESETUP)
!      For the 6 cm band.
!        Radio Astronomy allocation: 4990-5000
!        Radio Astronomy footnote:   4950-4990
!        VLA 50MHz 4960.1 to 5010.1 with VC mode.
!        VLA 6cm receiver falling off at high end.
!      Reference frequency is Mark II network standard
!      Merlin 4986-5002
!     Format      Tape length  Density  Tape speed  Time/pass
! VLBA/MkIII/MkIV    17600      High     160.00        22:00
!    MkIII/MkIV       8800      Low      270.00         6:31
!      256 Mbps - 1 pass/headpos
  nchan    = 8
  bits     = 2
  bbfilter = 8.0
  freqref= 4604.49, 4604.49, 4612.49, 4612.49, 
           4989.49, 4989.49, 4997.49, 4997.49
  freqoff  = 0
  netside  =  U, U, U, U, U, U, U, U
  pol      = dual
  /
! no vla frequency setup with this wide setup
endset  /
!
setinit = rm4cmv.set /
! NON STANDARD setup invented by Greg Taylor on 6/15/2003
! Modified by Nicole Gugliucci 2/2006
! based on...
! Standard setup file: v4cm-256-8-2.set                        
  nchan    = 8
  bits     = 2
  bbfilter = 8.0
  freqref= 8110.99, 8110.99, 8118.99, 8118.99, 
           8416.99, 8416.99, 8424.99, 8424.99
  freqoff  = 0
  netside  =  U, U, U, U, U, U, U, U
  pol      = dual
  /
endset / 
! ==========================================================
! =================  Initial Scan Information  =============
! ==========================================================
!
! Dummy start date to check things out.
LST=VLBA_PT
DAY    = 60563
start   = 14:00:00   !  start at 1400LST @ PT

!
! ==========================================================
! ========================  The Scans  =====================
! ==========================================================

stations = SC, HN, NL, FD, LA, PT, KP, OV, BR, MK

!=========================================================
! Start with polarization EVPA calibrator
!=========================================================

source = 3C279       dur=4:00 gap=0:00 setup=rm6cmv.set /
source = 3C279       dur=4:00 gap=0:00 setup=rm4cmv.set /
source = J1310+32  dur=2:00 gap=1:00 setup=rm6cmv.set /
source = J1310+32  dur=2:00 gap=0:00 setup=rm4cmv.set /
source= OQ208  dur=3:00 gap=0:00 setup=rm6cmv.set /
source= OQ208  dur=2:00 gap=0:00 setup=rm4cmv.set /

!This cycle: 18 min; Total: 18 minutes
!=========================================================
! Do 3 cycles 
!=========================================================

group 2 rep 3
source = J1826+18      dur=10:00 gap=0:00 setup=rm4cmv.set /
source = J1826+18      dur=10:00 gap=0:00 setup=rm6cmv.set /

!This cycle: 60 minutes; Total: 1 hr 18 min
!=========================================================
! Back to polarization calibrator
!=========================================================
source= OQ208  dur=3:00 gap=2:00 setup=rm6cmv.set /
source= OQ208  dur=3:00 gap=0:00 setup=rm4cmv.set /

!This cycle: 8 min; Total: 1 hr 26 min
!=========================================================
! Polarization calibrators
!=========================================================

source = 3C279       dur=2:00 gap=2:00 setup=rm6cmv.set /
source = 3C279       dur=5:00 gap=0:00 setup=rm4cmv.set /
source = J1310+32  dur=2:00 gap=1:20 setup=rm6cmv.set /
source = J1310+32  dur=2:00 gap=0:00 setup=rm4cmv.set /

!This cycle: 15 min; total: 1 hr 41 min
!=========================================================
! Do 3 cycles 
!=========================================================

group 2 rep 3
source = J1826+18      dur=10:00 gap=0:00 setup=rm4cmv.set /
source = J1826+18      dur=10:00 gap=0:00 setup=rm6cmv.set /

!This cycle: 1 hr; total: 2 hr 41 min
!=========================================================
! Back to polarization calibrator
!=========================================================
source= OQ208  dur=3:00 gap=2:00 setup=rm6cmv.set /
source= OQ208  dur=3:00 gap=0:00 setup=rm4cmv.set /

!This cycle: 8 min; Total: 2 hr 49 min
!=========================================================
! Do 3 cycles 
!=========================================================

group 2 rep 3
source = J1826+18      dur=10:00 gap=0:00 setup=rm4cmv.set /
source = J1826+18      dur=10:00 gap=0:00 setup=rm6cmv.set /

!This cycle: 1 hr; total: 3 hr 49 min
!=========================================================
! Polarization calibrators
!=========================================================

source = J1310+32       dur=2:00 gap=1:00 setup=rm6cmv.set /
source = J1310+32       dur=2:00 gap=0:00 setup=rm4cmv.set /
source= OQ208  dur=2:00 gap=2:00 setup=rm6cmv.set /
source= OQ208  dur=2:00 gap=0:00 setup=rm4cmv.set /

!this cycle: 11 min; total: 4 hr 
!=========================================================
! Do 3 cycles 
!=========================================================

group 2 rep 3
source = J1826+18      dur=10:00 gap=0:00 setup=rm4cmv.set /
source = J1826+18      dur=10:00 gap=0:00 setup=rm6cmv.set /

! This cycle: 1 hr; total: 5 hr
!========================================================
! Polarizarion calibrators
!========================================================

source = J2136+00          dur=2:00 gap=1:00 setup=rm6cmv.set /
source = J2136+00          dur=2:00 gap=0:00 setup=rm4cmv.set /

!This cycle: 5 min; total: 5 hr 5 min

!=========================================================
! Do 3 cycles
!=========================================================

group 2 rep 3
source = J1826+18      dur=10:00 gap=0:00 setup=rm4cmv.set /
source = J1826+18      dur=10:00 gap=0:00 setup=rm6cmv.set /

! This cycle: 1 hr; total: 6 hr 5 min
!=========================================================
! Polarization calibrators
!=========================================================

source = J2136+00          dur=2:00 gap=1:00 setup=rm6cmv.set /
source = J2136+00          dur=2:00 gap=0:00 setup=rm4cmv.set /

!This cycle: 5 min; total: 6 hr 10 min
!=========================================================
! Do 3 cycles 
!=========================================================

group 2 rep 3
source = J1826+18      dur=10:00 gap=0:00 setup=rm4cmv.set /
source = J1826+18      dur=10:00 gap=0:00 setup=rm6cmv.set /

!This cycle: 1 hr; Total: 7 hr 10 min
!=========================================================
! Polarization calibrators
!=========================================================

source = J2136+00          dur=2:00 gap=1:00 setup=rm6cmv.set /
source = J2136+00          dur=2:00 gap=0:00 setup=rm4cmv.set /

!This cycle: 5 min; total: 7 hr 15 min
!=========================================================
! Do 3 cycles 
!=========================================================

group 2 rep 3
source = J1826+18      dur=6:00 gap=0:00 setup=rm4cmv.set /
source = J1826+18      dur=6:00 gap=0:00 setup=rm6cmv.set /

!This cycle: 36 min; total: 7 hr 51 min

! end of file