overwrite
! 
!dosta 'vl'
!
!
! ==========================================================
! =================  Cover Information  ====================
! ==========================================================
!
expt     = 'Proper motions of water masers in M33'
expcode  = 'BB200B'
version  = 3
piname   = 'Andreas Brunthaler'
address1 = 'JIVE'
address2 = 'Postbus 2'
address3 = '7990 AA Dwingeloo'
address4 = 'the Netherlands'
phone    = '+31 521 596 540'
obsphone = '+31 521 596 540'
fax      = '+31 521 596 539 '
email    = 'brunthaler@jive.nl'
obsmode  = 'VLBA 256-8-2 1.3cm'
obstype  = 'VLBA'
note1   = ''
note2   = ''
!
! SUMMARY
! =======
!
! geodetic like observations:
! 9 quasars at begining and end of observation, each 5 minutes
! with broad frequency coverage, to get a zenith delay offset
! frequencies for geodetic and phase referencing observations 
! MUST NOT overlap
!
! Source: IC 133
! 4 x 8 MHz Bands (dual pol)
! 256-8-2 Mode
! Phase reference source: J0137+312
! Delay calibrator:  J0152+2207 
! Phase reference cycle: J0137+312 - M33/50 - J0137+312 - B4 - 
!                        J0137+312
! Switching time: 30 sec
! Velocities covered: -210.0 (M33/50) in third Band
!
!
! ================================================================
!   Preferred Dynamic Constraints.  Alter [defaults] as desired.
! ================================================================
! Equipment constraints:
!    Stations.  Below each station code, the "o" indicates an
!       [optional] station that is to be used if it is available.
!       Change "o" to "r" if the station is required or change
!       "o" to "n" if the station is not to be used.
!           SC  HN  NL  FD  LA  PT  KP  OV  BR  MK
!           o   r   o   o   o   o   o   o   o   r
!       Minimum number of stations [9 (6 for 3mm)]: 7
!       May we swap PT for a single VLA antenna? [no]
!          Consult http://www.aoc.nrao.edu/~lsjouwer/y1gotcha.html
!          to decide.  If you adopt the default, then both PT and
!          VLA1 must be in the stations list in the keyin file.
!    Bands and polarizations.  Below each band code, insert "R"
!       if the righthand polarization is to be used, "L" if the
!       lefthand polarization is to be used, "d" if dual
!       polarizations are to be used, or "o" if the band is in
!       your setups but scheduling should not be constrained by
!       its availability.
!           90cm  50cm  20cm  13cm  6cm  4cm  2cm  1cm  7mm  3mm
!                                                   d
! Weather constraints:
!    [appropriate for bands marked "L", "R", or "d" above
!     and for at least the minimum number of stations]
! Date constraints:
!    Preferred date(s), usually a series start [none]:
!    Excluded dates plus reason [none]:
!    Preferred interval between segments in days [none]:
!    Special conditions (e.g., a series with different
!       spacings in time): 3-30 days between two observation, then
!                          10-12 month until the next set of two observations
! ================================================================




! ==========================================================
! ==============  Correlator Information  ==================
! ==========================================================
correl   = 'Socorro'
coravg   = 2
corchan  = 128
cornant  = 10
corpol   = 'on'
!NOTE: We alternate betwee segments of single and dual pol. (S-D-S-D-S)
!in the observation!
corwtfn  = 'uniform'
corsrcs  = 'standard'
cortape  = DAT
cornote1 = '!NOTE: We alternate betwee segments of single and dual pol.'
cornote2 = '(S-D-S-D-S)in the observation!'
corship1 = 'Andreas Brunthaler'
corship2 = 'JIVE'
corship3 = 'Postbus 2'
corship4 = '7990 AA Dwingeloo, the Netherlands'

!
! ==========================================================
! =================== Tape initialization  =================
! ==========================================================
!**  WARNING: Check with data analysts that the following tape  **
!**           information is correct for YOUR project!          **
!
autotape=2
tapeini /
  tpsta   = vlba
  tpdrive = 1
  tpindex = 1
  tplength= 17600
  ndrives = 2
  nheadpos= 14
  density = H
 / !end tape initialization stuff
!
!
srccat /
source='J0152+2207' ra=01:52:18.059048 dec=+22:07:07.70004 epoch='J2000' CALCODE='A'
remarks='very strong calibrator 1 Jy (X-Band) 9 degrees away'/
source='J0137+312' ra=01:37:08.733637 dec=+31:22:35.85551   epoch='J2000' CALCODE='A'
remarks='strong calibrator 200 mJy 1 degree away'/
source='J0205+3212' ra=02:05:04.925371 dec=+32:12:30.09560 epoch='J2000' CALCODE='A'
remarks='very strong calibrator 750 mJy (X-Band) 7 degrees away'/
source='J0136+475' ra=01:36:58.594810 dec=+47:51:29.10006  epoch='J2000' CALCODE='A'
remarks='very strong calibrator 2 Jy 16 degrees away'/
source='B4' ra=01:32:22.671857 dec=+30:44:07.26721 epoch='J2000' 
remarks='weak calibrator 10 mJy 15 arcmin away'/
source='IC133' ra=01:33:16.540877 dec=+30:52:49.99491 epoch='J2000'
        vel=-18.2,-18.2,-126.07,-126.07,-233.93,-233.93,-341.79,-341.79 /
source='M33/19' ra=01:33:29.431047 dec=+30:31:55.40191  epoch='J2000'
        vel=-18.2,-18.2,-126.07,-126.07,-233.93,-233.93,-341.79,-341.79 /
source='M33/50' ra=01:34:00.22656 dec=+30:40:47.1755 epoch='J2000'
        vel=5.72,5.72,-102.14,-102.14,-210.00,-210.00,-317.86,-317.86 /

source='J0011-2612' ra=00:11:01.246752 dec=-26:12:33.37713 epoch='J2000'/
source='J0011+7045' ra=00:11:31.902830 dec=+70:45:31.62555 epoch='J2000'/
source='J0019+2021' ra=00:19:37.854504 dec=+20:21:45.64461 epoch='J2000'/
source='J0105+4819' ra=01:05:49.928165 dec=+48:19:03.19258 epoch='J2000'/
source='J0122+2502' ra=01:22:38.815998 dec=+25:02:31.79318 epoch='J2000'/
source='J0204-1701' ra=02:04:57.674351 dec=-17:01:19.84018 epoch='J2000'/
source='J0249+0619' ra=02:49:18.016104 dec=+06:19:51.94723 epoch='J2000'/
source='J0349+4609' ra=03:49:18.741556 dec=+46:09:59.65815 epoch='J2000'/
source='J0359+3220' ra=03:59:44.912899 dec=+32:20:47.15550 epoch='J2000'/
source='J0359+6005' ra=03:59:02.639962 dec=+60:05:22.06855 epoch='J2000'/ 
source='J0536+5038' ra=05:36:20.231903 dec=+50:38:26.25156 epoch='J2000'/
source='J0541+5312' ra=05:41:16.174034 dec=+53:12:24.83415 epoch='J2000'/ 
source='J0639+7324' ra=06:39:21.961191 dec=+73:24:58.04049 epoch='J2000'/
source='J0747+7639' ra=07:47:14.607557 dec=+76:39:17.27149 epoch='J2000'/ 
source='J0929+5013' ra=09:29:15.440206 dec=+50:13:35.99005 epoch='J2000'/ 
source='J0958+6533' ra=09:58:47.245102 dec=+65:33:54.81806 epoch='J2000'/
source='J1148+5254' ra=11:48:56.569016 dec=+52:54:25.32333 epoch='J2000'/ 
source='J1224+2122' ra=12:24:54.458385 dec=+21:22:46.38861 epoch='J2000'/
source='J1329+3154' ra=13:29:52.864929 dec=+31:54:11.05501 epoch='J2000'/
source='J1417+4607' ra=14:17:08.161301 dec=+46:07:05.44837 epoch='J2000'/
source='J1419+3821' ra=14:19:46.613762 dec=+38:21:48.47522 epoch='J2000'/ 
source='J1521+4336' ra=15:21:49.613873 dec=+43:36:39.26797 epoch='J2000'/ 
source='J1545+5135' ra=15:45:02.823679 dec=+51:35:00.87328 epoch='J2000'/ 
source='J1642+3948' ra=16:42:58.809952 dec=+39:48:36.99395 epoch='J2000'/ 
source='J1657+4808' ra=16:57:46.878948 dec=+48:08:33.04108 epoch='J2000'/ 
source='J1716+6836' ra=17:16:13.938002 dec=+68:36:38.74458 epoch='J2000'/
source='J1735+3616' ra=17:35:48.086674 dec=+36:16:45.61139 epoch='J2000'/ 
source='J1804+0101' ra=18:04:15.984606 dec=+01:01:32.40734 epoch='J2000'/
source='J1832+1357' ra=18:32:43.471123 dec=+13:57:44.40030 epoch='J2000'/
source='J1850+2825' ra=18:50:27.589808 dec=+28:25:13.15557 epoch='J2000'/
source='J1927+6117' ra=19:27:30.442629 dec=+61:17:32.87921 epoch='J2000'/ 
source='J2002+4725' ra=20:02:10.418290 dec=+47:25:28.77340 epoch='J2000'/
source='J2023+5427' ra=20:23:55.844025 dec=+54:27:35.82899 epoch='J2000'/
source='J2151+0709' ra=21:51:31.429323 dec=+07:09:26.78392 epoch='J2000'/
source='J2225+2118' ra=22:25:38.047131 dec=+21:18:06.41485 epoch='J2000'/
source='J2241+4120' ra=22:41:07.205247 dec=+41:20:11.61822 epoch='J2000'/
source='J2334+0736' ra=23:34:12.828194 dec=+07:36:27.55204 epoch='J2000'/ 

endcat /

lineinit /
lineset='H2O' restfreq= 22235.08, 22235.08, 22235.08, 22235.08,
                        22235.08, 22235.08, 22235.08, 22235.08 / 
endlines /

!
!srcfile  = 'NONE'
stafile  = '$SCHED/catalogs/stations.dat'
srcfile  = '$SCHED/catalogs/sources.vlba'
!srcfile  = '/users/p062gra/vlbasked/catalogs/sources.vlba'
!stafile  = '/users/p062gra/vlbasked/catalogs/stations.dat'
!

linename = 'H2O'
year     = 2005
!month    = 04
day      = 60161
LST=VLBA_PT
!day=51624
start=19:30:00

stations = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA,
           VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK
!                                                              end     end

! 1st block of 'geodetic-like' observations 
setup    = 'v1cm-256-8-2-L_new.set'

source='J1419+3821' dwell=90 dopsrc=''/
source='J1329+3154' dwell=90 /
source='J1148+5254' dwell=90 /
source='J0958+6533' dwell=90 /
source='J0747+7639' dwell=90 /
source='J0122+2502' dwell=90 /
source='J0019+2021' dwell=90 /
source='J2151+0709' dwell=90 /
source='J2002+4725' dwell=90 /
source='J1804+0101' dwell=90 /
source='J1716+6836' dwell=90 /
source='J1521+4336' dwell=90 /
source='J2023+5427' dwell=90 /


! phase-reference observations
doppler
setup    = '$SCHED/setups/v1cm-256-8-2.set'

!--------------------------------------------------------------
source = '3C454.3'  dur=00:05:00 dopsrc='M33/50' gap=00:05:00/
!--------------------------------------------------------------

!01************************************************************
source='J0137+312' dwell=00:00:30 dopsrc='M33/50' gap=00:00:00/
!
group=4 repeat=24
source='M33/50'    dur=00:00:30 dopsrc='M33/50'/
source='J0137+312' dur=00:00:30 dopsrc='M33/50'/
source='B4'        dur=00:00:30 dopsrc='M33/50'/
source='J0137+312' dur=00:00:30 dopsrc='M33/50'/



source='J0136+475' dur=00:02:30 dopsrc='M33/50' gap=00:02:30/
!*************************************************************

!02************************************************************
source='J0137+312' dwell=00:00:30 dopsrc='M33/50' gap=00:00:00/
!
group=2 repeat=52
source='M33/50'    dur=00:00:30 dopsrc='M33/50'/
source='J0137+312' dur=00:00:30 dopsrc='M33/50'/



source='J0152+2207' dur=00:02:30 dopsrc='M33/50' gap=00:02:30/
!*************************************************************

!03************************************************************
source='J0137+312' dwell=00:00:30 dopsrc='M33/50' gap=00:00:00/
!
group=4 repeat=26
source='M33/50'    dur=00:00:30 dopsrc='M33/50'/
source='J0137+312' dur=00:00:30 dopsrc='M33/50'/
source='B4'        dur=00:00:30 dopsrc='M33/50'/
source='J0137+312' dur=00:00:30 dopsrc='M33/50'/

source='J0136+475' dur=00:02:30 dopsrc='M33/50' gap=00:02:30/
!*************************************************************

!04************************************************************
source='J0137+312' dwell=00:00:30 dopsrc='M33/50' gap=00:00:00/
!
group=2 repeat=52
source='M33/50'    dur=00:00:30 dopsrc='M33/50'/
source='J0137+312' dur=00:00:30 dopsrc='M33/50'/

source='J0152+2207' dur=00:02:30 dopsrc='M33/50' gap=00:02:30/
!*************************************************************


!05************************************************************
source='J0137+312' dwell=00:00:30 dopsrc='M33/50' gap=00:00:00/
!
group=4 repeat=26
source='M33/50'    dur=00:00:30 dopsrc='M33/50'/
source='J0137+312' dur=00:00:30 dopsrc='M33/50'/
source='B4'        dur=00:00:30 dopsrc='M33/50'/
source='J0137+312' dur=00:00:30 dopsrc='M33/50'/

source='J0136+475' dur=00:02:30 dopsrc='M33/50' gap=00:02:30/
!*************************************************************


! 2nd block of 'geodetic-like' observations 
nodop
setup    = 'v1cm-256-8-2-L_new.set' 

SOURCE='J1850+2825' dwell=90 dopsrc='' gap=00:00:00/
SOURCE='J1716+6836' dwell=90 /
SOURCE='J0958+6533' dwell=90 /
source='J0747+7639' dwell=90 /
SOURCE='J0359+6005' dwell=90 /
source='J0249+0619' dwell=90 /
SOURCE='J0204-1701' dwell=90 /
SOURCE='J0011-2612' dwell=90 /
SOURCE='IIIZW2'     dwell=90 /
SOURCE='J0105+4819' dwell=90 /
SOURCE='J2225+2118' dwell=90 /
source='J2023+5427' dwell=90 /
source='J2002+4725' dwell=90 /

! phase-reference observations
doppler
setup    = '$SCHED/setups/v1cm-256-8-2.set'

!06************************************************************
source='J0152+2207' dur=00:02:30 dopsrc='M33/50' gap=00:02:30/
!
source='J0137+312' dwell=00:00:30 dopsrc='M33/50' gap=00:00:00/
!
group=2 repeat=52
source='M33/50'    dur=00:00:30 dopsrc='M33/50'/
source='J0137+312' dur=00:00:30 dopsrc='M33/50'/

source='J0152+2207' dur=00:02:30 dopsrc='M33/50' gap=00:02:30/
!*************************************************************

!07************************************************************
source='J0137+312' dur=00:00:30 dopsrc='M33/50' gap=00:00:00/
!
group=4 repeat=24
source='M33/50'    dur=00:00:30 dopsrc='M33/50'/
source='J0137+312' dur=00:00:30 dopsrc='M33/50'/
source='B4'        dur=00:00:30 dopsrc='M33/50'/
source='J0137+312' dur=00:00:30 dopsrc='M33/50'/

source='J0136+475' dur=00:02:30 dopsrc='M33/50' gap=00:02:30/
!*************************************************************


!08************************************************************
source='J0137+312' dwell=00:00:30 dopsrc='M33/50' gap=00:00:00/
!
group=2 repeat=48
source='M33/50'    dur=00:00:30 dopsrc='M33/50'/
source='J0137+312' dur=00:00:30 dopsrc='M33/50'/

source='J0152+2207' dur=00:02:30 dopsrc='M33/50' gap=00:02:30/
!*************************************************************



!09************************************************************
source='J0137+312' dwell=00:00:30 dopsrc='M33/50' gap=00:00:00/
!
group=2 repeat=52
source='M33/50'    dur=00:00:30 dopsrc='M33/50'/
source='J0137+312' dur=00:00:30 dopsrc='M33/50'/

source='J0136+475' dur=00:02:30 dopsrc='M33/50' gap=00:02:30/
!*************************************************************


!10************************************************************
source='J0137+312' dwell=00:00:30 dopsrc='M33/50' gap=00:00:00/
!
group=4 repeat=22
source='M33/50'    dur=00:00:30 dopsrc='M33/50'/
source='J0137+312' dur=00:00:30 dopsrc='M33/50'/
source='B4'        dur=00:00:30 dopsrc='M33/50'/
source='J0137+312' dur=00:00:30 dopsrc='M33/50'/

source='J0136+475' dur=00:02:30 dopsrc='M33/50' gap=00:02:30/
!*************************************************************

!--------------------------------------------------------------
source = '0528+134'  dur=00:05:00 dopsrc='M33/50' gap=00:07:00/
!--------------------------------------------------------------

! 3rd block of 'geodetic-like' observations 
nodop
setup    = 'v1cm-256-8-2-L_new.set'

source='J0639+7324' dwell=90 dopsrc='' gap=00:00:00/
SOURCE='J0536+5038' dwell=90 /
SOURCE='J0359+6005' dwell=90 /
source='J0359+3220' dwell=90 /
source='J0349+4609' dwell=90 /
source='J0249+0619' dwell=90 /
SOURCE='J0011+7045' dwell=90 /
SOURCE='J0929+5013' dwell=90 /
source='J0958+6533' dwell=90 /
SOURCE='J0747+7639' dwell=90 /
SOURCE='J0105+4819' dwell=90 /
SOURCE='J0122+2502' dwell=90 /
source='J1224+2122' dwell=90 /
SOURCE='J1716+6836' dwell=90 /