! ================================================================ ! Preferred Dynamic Contraints. Alter [defaults] as desired. ! ================================================================ ! Equipment constraints: ! Stations. Below each station code, the "o" indicates an ! [optional] station that is to be used if it is available. ! Change "o" to "r" if the station is required or change ! "o" to "n" if the station is not to be used. ! SC HN NL FD LA PT KP OV BR MK ! o o o o o o o o o o ! Minimum number of stations [9 (6 for 3mm)]: 7 but no more ! than 2 out from SW array (FD, LA, PT, KP) ! May we swap PT for a single VLA antenna? [yes] no ! Consult http://www.aoc.nrao.edu/~gtaylor/y1gotcha.html ! to decide. If you adopt the default, then both PT and ! VLA1 must be in the stations list in the keyin file. ! Bands and polarizations. Below each band code, insert "R" ! if the righthand polarization is to be used, "L" if the ! lefthand polarization is to be used, "d" if dual ! polarizations are to be used, or "o" if the band is in ! your setups but scheduling should not be constrained by ! its availability. ! 90cm 50cm 20cm 13cm 6cm 4cm 2cm 1cm 7mm 3mm ! d ! Weather constraints: ! we'll take weather appropriate for 4cm rather than 1cm at ! any station ! Date constraints: ! Preferred date(s), usually a series start [none]: as soon as possible ! Excluded dates plus reason [none]: ! Preferred interval between segments in days [none]: ! Special conditions (e.g., a series with different ! spacings in time) [none]: ! ================================================================ VERSION = 1 EXPT = 'VLBA format test phase referencing H2O' EXPCODE = 'bc139b' OBSTYPE = 'VLBA' SRCFILE = 'NONE' PINAME = 'M. Claussen' ADDRESS1 = 'NRAO-AOC' ADDRESS2 = 'P.O. Box O' ADDRESS3 = 'Socorro, NM 87801' PHONE = '505-835-7284' OBSPHONE = '505-835-4071' FAX = '505-835-7027' EMAIL = 'mclausse@nrao.edu' NOTE1 = 'Use all available antennas.' ! ! ================================================================= ! ===================== Tape Initialization ===================== ! ================================================================= ! tapeini / tpsta = 'VLBA', 'VLA1' ndrives = 2 , 2 nheadpos = 14, 14 tpdrive = 1, 1 tpindex = 1, 1 tplength = 17600, 17600 density = high, high / autotape = 2 ! ! end tape initialization stuff ! ! ================================================================= ! ==================== Correlator Information =================== ! ================================================================= ! correl = 'Socorro' coravg = 1.048 corchan = 512 cornant = 10 corpol = 'off' corship1 = 'M. Claussen' corship2 = 'NRAO-AOC' cortape 'DAT' corwtfn = 'uniform' corsrcs = 'use sched positions for correlation of target' cornote1 = 'multiple correlation will be required' ! ! end correlator parameters ! overwrit sumitem = el1, dwell ! srccat / ! H2O maser sources. Will use multiple correlation passes ! source='VXUMA' RA= 10:55:40.884 DEC= 71:52:09.571 Epoch='J2000' vel=-50.7 / source='RXBOO' RA= 14:24:11.632 DEC= 25:42:13.179 Epoch='J2000' vel=+2.4 / source='SCRB' RA= 15:21:23.948 DEC= 31:22:02.533 Epoch='J2000' vel=+1.7 / source='RXOPH' RA= 16:52:48.203 DEC= 05:24:27.119 Epoch='J2000' vel=-47.5 / source='SGRB2' RA= 17:47:19.840 DEC=-28:22:19.236 Epoch='J2000' vel=+50.0 / ! calibrator source for Sgr B2 source='J1745-28' RA= 17:45:52.4968 DEC=-28:20:26.294 Epoch='J2000' / endcat / ! ! stafile = '$SCHED/catalogs/stations.dat' srcfile = '$SCHED/catalogs/sources.vlba' ! ! ! Spectral lines ! lineinit / lineset ='H2O' restfreq=22010.00, 22024.1, 22066.3, 22143.8, 22235.08, 22418.5, 22461.8, 22489.0 / endlines / ! setinit = bc089.set / ! ! Setup for VLBA 22-GHz H2O line. ! 8 MHz bandwidth, 1.3 cm wavelength ! ! nchan = 8 samprate = 16.0 bits = 1 bbfilter = 8.0 ! 128 Mbps ! tpmode = 2 format = 'VLBA1:4' firstlo = 21500.00 fe(2) = '1cm' fe(4) = '1cm' freqref = 22235.08 freqoff = -225.08, -210.98, -168.78, -91.28, 0.0, 183.42, 226.72, 254.92 netside = U,U,U,U,U,U,U,U ifchan = L,L,L,L,L,L,L,L pcal = 'off' station = 'VLBA' rchan = B lchan = D / endset / ! ! ! !year = 2003 !month = 08 day = 59837 start = 9:00:00 lst = 'vlba_pt' ! obstype='vlba' ! STATIONS = VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK ! ! ! ! ! DOPPLER SETUP = 'bc089.set' LINENAME='H2O' BW = 8.0, 8.0, 8.0, 8.0, 8.0, 8.0, 8.0, 8.0 ! ! VX UMa SECTION !--------------- ! dopsrc='VXUMA' group 2 repeat 26 source = 'VXUMA' gap=0 dwell = 20 / source = 'j1048+7143' gap=0 dwell = 20 / group 2 repeat 26 source = 'VXUMA' gap=0 dwell = 20 / source = 'j1101+7225' gap=0 dwell = 20 / group 2 repeat 26 source = 'VXUMA' gap=0 dwell = 20 / source = 'j1048+7143' gap=0 dwell = 20 / group 2 repeat 26 source = 'VXUMA' gap=0 dwell = 20 / source = 'j1101+7225' gap=0 dwell = 20 / source = '3C279' gap = 00:02:00 dwell = 00:05:00 / ! geodetic run (GST=17.9542 -- 18.4556) !------------- NODOP SOURCE='1324+224' dur=00:03:00 / SOURCE='1213+350' dur=00:03:00 / SOURCE='1144+402' dur=00:03:00 / SOURCE='1130+009' dur=00:03:00 / SOURCE='1020+400' dur=00:03:00 / SOURCE='1128+385' dur=00:03:00 / SOURCE='1030+415' dur=00:03:00 / SOURCE='1101+384' dur=00:03:00 / SOURCE='1034-293' dur=00:03:00 / SOURCE='1048-313' dur=00:03:00 / ! Turn Doppler tracking back on DOPPLER ! RX Boo SECTION !--------------- dopsrc 'RXBOO' source = '3C279' gap = 00:02:00 dwell = 00:05:00 / ! group 2 repeat 26 source = 'RXBOO' gap=0 dwell = 20 / source = 'j1419+2706' gap=0 dwell = 20 / ! group 2 repeat 26 source = 'RXBOO' gap=0 dwell = 20 / source = 'j1427+2348' gap=0 dwell = 20 / ! group 2 repeat 26 source = 'RXBOO' gap=0 dwell = 20 / source = 'j1419+2706' gap=0 dwell = 20 / ! group 2 repeat 26 source = 'RXBOO' gap=0 dwell = 20 / source = 'j1427+2348' gap=0 dwell = 20 / ! S CrB SECTION !-------------- dopsrc 'SCRB' source = '3C345' gap = 00:02:00 dwell = 00:05:00 / ! group 2 repeat 102 source = 'SCRB' gap=0 dwell = 20 / source = 'j1522+3144' gap=0 dwell = 20 / ! RX Oph SECTION !--------------- dopsrc 'RXOPH' source = '3C345' gap = 00:00:00 dwell = 00:05:00 / ! group 2 repeat 26 source = 'RXOPH' gap=0 dwell = 20 / source = 'j1652+0618' gap=0 dwell = 20 / ! group 2 repeat 26 source = 'RXOPH' gap=0 dwell = 20 / source = 'j1658+0515' gap=0 dwell = 20 / ! group 2 repeat 26 source = 'RXOPH' gap=0 dwell = 20 / source = 'j1652+0618' gap=0 dwell = 20 / ! group 2 repeat 26 source = 'RXOPH' gap=0 dwell = 20 / source = 'j1658+0515' gap=0 dwell = 20 / ! geodetic run (GST=0.0375 -- 0.5389) !------------- NODOP SOURCE='1732+389' dur=00:03:00 / SOURCE='1734+363' dur=00:03:00 / SOURCE='NRAO512' dur=00:03:00 / SOURCE='3C345' dur=00:03:00 / SOURCE='1758+388' dur=00:03:00 / SOURCE='DA426' dur=00:03:00 / SOURCE='1647-296' dur=00:03:00 / SOURCE='1413+135' dur=00:03:00 / SOURCE='1633+38' dur=00:03:00 / SOURCE='1624+416' dur=00:03:00 / ! Turn Doppler tracking back on DOPPLER ! Sgr B2 SECTION !--------------- dopsrc 'SGRB2' source = '3C345' gap = 00:02:00 dwell = 00:05:00 / ! group 2 repeat 103 source = 'SGRB2' gap=0 dwell = 20 / source = 'J1745-28' gap=0 dwell = 20 /